Re: [PATCH v5 2/2] drm/bridge: lvds-codec: Add support for LVDS data mapping select

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Marek,

On Sun, Oct 10, 2021 at 12:41:52AM +0200, Marek Vasut wrote:
> Decoder input LVDS format is a property of the decoder chip or even
> its strapping. Handle data-mapping the same way lvds-panel does. In
> case data-mapping is not present, do nothing, since there are still
> legacy bindings which do not specify this property.
> 
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Signed-off-by: Marek Vasut <marex@xxxxxxx>
> Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
> To: dri-devel@xxxxxxxxxxxxxxxxxxxxx

I am late to the game here - sorry. A few details in the following.
With these considered:
Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx>

	Sam

> ---
> V2: - Move the data-mapping to endpoint
> V3: - Rebase on V2 submitted a while ago, reinstate changelog
>     - Use .atomic_get_input_bus_fmts for the decoder, separate funcs for encoder
> V4: - No change
> V5: - Move the data-mapping property to port@0 , decoder LVDS input
>     - Add RB from Laurent
> ---
>  drivers/gpu/drm/bridge/lvds-codec.c | 76 ++++++++++++++++++++++++++++-
>  1 file changed, 75 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/bridge/lvds-codec.c b/drivers/gpu/drm/bridge/lvds-codec.c
> index dcf579a4cf83..08091bab4857 100644
> --- a/drivers/gpu/drm/bridge/lvds-codec.c
> +++ b/drivers/gpu/drm/bridge/lvds-codec.c
> @@ -12,6 +12,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/regulator/consumer.h>
>  
> +#include <drm/drm_atomic_helper.h>
>  #include <drm/drm_bridge.h>
>  #include <drm/drm_panel.h>
>  
> @@ -22,6 +23,7 @@ struct lvds_codec {
>  	struct regulator *vcc;
>  	struct gpio_desc *powerdown_gpio;
>  	u32 connector_type;
> +	unsigned int bus_format;
>  };
>  
>  static inline struct lvds_codec *to_lvds_codec(struct drm_bridge *bridge)
> @@ -74,12 +76,50 @@ static const struct drm_bridge_funcs funcs = {
>  	.disable = lvds_codec_disable,
>  };
>  
> +#define MAX_INPUT_SEL_FORMATS 1
> +static u32 *
> +lvds_codec_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
> +				     struct drm_bridge_state *bridge_state,
> +				     struct drm_crtc_state *crtc_state,
> +				     struct drm_connector_state *conn_state,
> +				     u32 output_fmt,
> +				     unsigned int *num_input_fmts)
> +{
> +	struct lvds_codec *lvds_codec = to_lvds_codec(bridge);
> +	u32 *input_fmts;
> +
> +	*num_input_fmts = 0;
> +
> +	input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts),
> +			     GFP_KERNEL);
> +	if (!input_fmts)
> +		return NULL;
> +
> +	input_fmts[0] = lvds_codec->bus_format;
> +	*num_input_fmts = MAX_INPUT_SEL_FORMATS;
> +
> +	return input_fmts;
> +}
> +
> +static const struct drm_bridge_funcs funcs_decoder = {
> +	.attach = lvds_codec_attach,
> +	.enable = lvds_codec_enable,
> +	.disable = lvds_codec_disable,
> +	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
> +	.atomic_reset = drm_atomic_helper_bridge_reset,
> +	.atomic_get_input_bus_fmts = lvds_codec_atomic_get_input_bus_fmts,
> +};
> +
>  static int lvds_codec_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
>  	struct device_node *panel_node;
> +	struct device_node *bus_node;
>  	struct drm_panel *panel;
>  	struct lvds_codec *lvds_codec;
> +	const char *mapping;
> +	int ret;
>  
>  	lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL);
>  	if (!lvds_codec)
> @@ -119,13 +159,47 @@ static int lvds_codec_probe(struct platform_device *pdev)
>  	if (IS_ERR(lvds_codec->panel_bridge))
>  		return PTR_ERR(lvds_codec->panel_bridge);
>  
> +	lvds_codec->bridge.funcs = &funcs;
> +
> +	/*
> +	 * Decoder input LVDS format is a property of the decoder chip or even
> +	 * its strapping. Handle data-mapping the same way lvds-panel does. In
> +	 * case data-mapping is not present, do nothing, since there are still
> +	 * legacy bindings which do not specify this property.
The missing data-mapping property is reported as an error, but this
comments says it is OK. Info?
> +	 */
> +	if (lvds_codec->connector_type != DRM_MODE_CONNECTOR_LVDS) {
> +		bus_node = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0);
Are there any reg specified in the binding? If not then the second
parameter should be -1 here.

> +		if (!bus_node) {
> +			dev_dbg(dev, "bus DT node not found\n");
> +			return -ENXIO;
> +		}
> +
> +		ret = of_property_read_string(bus_node, "data-mapping",
> +					      &mapping);
> +		of_node_put(bus_node);
> +		if (ret < 0) {
> +			dev_err(dev, "missing 'data-mapping' DT property\n");
> +		} else {
It would be nice with a helper for the below code if we need this a third
time.
> +			if (!strcmp(mapping, "jeida-18")) {
> +				lvds_codec->bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG;
> +			} else if (!strcmp(mapping, "jeida-24")) {
> +				lvds_codec->bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA;
> +			} else if (!strcmp(mapping, "vesa-24")) {
> +				lvds_codec->bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG;
> +			} else {
> +				dev_err(dev, "invalid 'data-mapping' DT property\n");
> +				return -EINVAL;
> +			}
Add empty line here.
> +			lvds_codec->bridge.funcs = &funcs_decoder;
> +		}
> +	}
> +
>  	/*
>  	 * The panel_bridge bridge is attached to the panel's of_node,
>  	 * but we need a bridge attached to our of_node for our user
>  	 * to look up.
>  	 */
>  	lvds_codec->bridge.of_node = dev->of_node;
> -	lvds_codec->bridge.funcs = &funcs;
>  	drm_bridge_add(&lvds_codec->bridge);
>  
>  	platform_set_drvdata(pdev, lvds_codec);
> -- 
> 2.33.0



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux