On Tue 05 Oct 21:26 PDT 2021, Stephen Boyd wrote:
> Quoting Bjorn Andersson (2021-10-05 19:37:52)
> > On Tue 05 Oct 19:06 PDT 2021, Stephen Boyd wrote:
> >
> > > Quoting Bjorn Andersson (2021-10-05 18:43:16)
> > > > On Tue 05 Oct 17:43 PDT 2021, Stephen Boyd wrote:
> > > >
> > > > > Quoting Bjorn Andersson (2021-10-05 16:13:21)
> > > > > > diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> > > > > > index bdaf227f05dc..674cddfee5b0 100644
> > > > > > --- a/drivers/gpu/drm/msm/dp/dp_display.c
> > > > > > +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> > > > > > @@ -1233,7 +1239,7 @@ static int dp_display_probe(struct platform_device *pdev)
> > > > > > if (!dp)
> > > > > > return -ENOMEM;
> > > > > >
> > > > > > - desc = dp_display_get_desc(pdev);
> > > > > > + desc = dp_display_get_desc(pdev, &dp->id);
> > > > >
> > > > > I'm sad that dp->id has to match the number in the SoC specific
> > > > > dpu_intf_cfg array in drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > > > > still. Is there any way we can avoid that? Also, notice how those arrays
> > > > > already have INTF_DP macros, which makes me think that it may be better
> > > > > to connect this to those arrays instead of making an msm_dp_desc
> > > > > structure and then make sure the 'type' member matches a connector
> > > > > type number. Otherwise this code is super fragile.
> > > > >
> > > >
> > > > I'm afraid I don't understand what you're proposing. Or which part you
> > > > consider fragile, the indices of the INTF_DP instances aren't going to
> > > > move around...
> > > >
> > > > I have N instances of the DP driver that I need to match to N entries
> > > > from the platform specific intf array, I need some stable reference
> > > > between them. When I started this journey I figured I could rely on the
> > > > of_graph between the DPU and the interface controllers, but the values
> > > > used there today are just bogus, so that was a no go.
> > > >
> > > > We can use whatever, as long as _dpu_kms_initialize_displayport() can
> > > > come up with an identifier to put in h_tile_instance[0] so that
> > > > dpu_encoder_setup_display() can find the relevant INTF.
> > > >
> > >
> > > To make it more concrete we can look at sc7180
> > >
> > > static const struct dpu_intf_cfg sc7180_intf[] = {
> > > INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 24,
> > > INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
> > > ^
> > > |
> > >
> > > intf0 is irrelevant. Also the address is irrelevant. But here we have a
> > > zero, the number after INTF_DP, and that is very relevant. That number
> > > needs to match the dp->id. Somewhere we have a match between
> > > controller_id and dp->id in the code.
> >
> > That number (the 0, not INTF_0) is what the code matches against dp->id
> > in _dpu_kms_initialize_displayport(), in order to figure out that this
> > is INTF_0 in dpu_encoder_setup_display().
> >
> > I.e. look at the sc8180x patch:
> >
> > INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 24, INTF_SC8180X_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
> > INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC8180X_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> > INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC8180X_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
> > /* INTF_3 is for MST, wired to INTF_DP 0 and 1, use dummy index until this is supported */
> > INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 999, 24, INTF_SC8180X_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
> > INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, 1, 24, INTF_SC8180X_MASK, MDP_SSPP_TOP0_INTR, 20, 21),
> > INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, 2, 24, INTF_SC8180X_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
> >
> > Where the DP driver defines the 3 controllers with dp->id of 0, 1 and 2,
> > which the DPU code will match against to INTF_0, INTF_4 and INTF_5.
> >
>
> Yep. I'm saying that having to make that number in this intf array match
> the order of the register mapping descriptor array is fragile. Why can't
> we indicate the interface is DP or eDP with INTF_DP or INTF_EDP and then
> map from the descriptor array to this intf array somehow so that the
> order of the descriptor array doesn't matter? Then we don't have to put
> the connector type in the descriptor array, and we don't have to keep
> the order of the array a certain way to match this intf descriptor.
>
> Maybe
>
> struct msm_dp_desc {
> phys_addr_t io_start;
> unsigned int id;
The INTF_<N> constants are a property of the DPU driver and not
available in the DP driver and the msm_dp struct is a property of the DP
driver and can't be dereferenced in the DPU driver.
The proposed way around this is that the descs array defines the order
in priv->dp[N] and this N is used as controller_id.
So the only thing that I don't find straight forward here is that the
eDP controller is considered just a DP controller, so you have to use
INTF_DP, <N> for that, and not just INTF_EDP, 0.
> };
>
> and then have msm_dp_desc::id equal INTF_<N> and then look through the
> intf from DPU here in the DP driver to find the id and type of connector
> that should be used by default? Still sort of fragile because the only
> connection is an unsigned int which isn't great, but at least it's
> explicit instead of implicit based on the array order.
No matter how I look at this, you need to put some number somewhere here
that will be used to match up the INTF with the right DSI/DP encoder.
Using the proposed number scheme follows the numbering of all the DP
controllers from the documentation.
Regards,
Bjorn
