Re: [PATCH v4 10/10] drm/ingenic: add some jz4780 specific features

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Le lun., sept. 27 2021 at 18:44:28 +0200, H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> a écrit :
From: Paul Boddie <paul@xxxxxxxxxxxxx>

The jz4780 has some features which need initialization
according to the vendor kernel.

Signed-off-by: Paul Boddie <paul@xxxxxxxxxxxxx>
Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
---
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 39 +++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
index e2df4b085905..605549b316b5 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
+++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
@@ -66,6 +66,10 @@ struct jz_soc_info {
 	bool needs_dev_clk;
 	bool has_osd;
 	bool map_noncoherent;
+	bool has_alpha;
+	bool has_pcfg;
+	bool has_recover;
+	bool has_rgbc;
 	bool use_extended_hwdesc;
 	unsigned int max_width, max_height;
 	const u32 *formats_f0, *formats_f1;
@@ -732,6 +736,9 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
 		    | JZ_LCD_CFG_SPL_DISABLE | JZ_LCD_CFG_REV_DISABLE;
 	}

+	if (priv->soc_info->has_recover)
+		cfg |= JZ_LCD_CFG_RECOVER_FIFO_UNDERRUN;

Did you actually test this? I know that in theory it sounds like something we'd want, but unless there is a proven use for it, it's better to keep it disabled.

+
 	/* set use of the 8-word descriptor and OSD foreground usage. */
 	if (priv->soc_info->use_extended_hwdesc)
 		cfg |= JZ_LCD_CFG_DESCRIPTOR_8;
@@ -1321,6 +1328,25 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
 	if (soc_info->has_osd)
 		regmap_set_bits(priv->map, JZ_REG_LCD_OSDC, JZ_LCD_OSDC_OSDEN);

+	if (soc_info->has_alpha)
+		regmap_set_bits(priv->map, JZ_REG_LCD_OSDC, JZ_LCD_OSDC_ALPHAEN);

I remember you saying that OSD mode was not yet working on the JZ4780. So I can't see how you could have tested this.

+
+ /* Magic values from the vendor kernel for the priority thresholds. */
+	if (soc_info->has_pcfg)
+		regmap_write(priv->map, JZ_REG_LCD_PCFG,
+			     JZ_LCD_PCFG_PRI_MODE |
+			     JZ_LCD_PCFG_HP_BST_16 |
+			     (511 << JZ_LCD_PCFG_THRESHOLD2_OFFSET) |
+			     (400 << JZ_LCD_PCFG_THRESHOLD1_OFFSET) |
+			     (256 << JZ_LCD_PCFG_THRESHOLD0_OFFSET));

Unless you add a big comment that explains what these values do and why we do want them, I don't want magic values in here. The fact that the kernel vendor sets this doesn't mean it's needed and/or wanted.

+
+	/* RGB output control may be superfluous. */
+	if (soc_info->has_rgbc)
+		regmap_write(priv->map, JZ_REG_LCD_RGBC,
+			     JZ_LCD_RGBC_RGB_FORMAT_ENABLE |
+			     JZ_LCD_RGBC_ODD_RGB |
+			     JZ_LCD_RGBC_EVEN_RGB);

ingenic-drm only supports RGB output right now, so I guess the RGB_FORMAT_ENABLE bit needs to be set in patch [2/10], otherwise patch [2/10] cannot state that it adds support for the JZ4780, if it doesn't actually work.

The other two bits can be dropped, they are already set in ingenic_drm_encoder_atomic_mode_set().

+
 	mutex_init(&priv->clk_mutex);
 	priv->clock_nb.notifier_call = ingenic_drm_update_pixclk;

@@ -1484,6 +1510,9 @@ static const struct jz_soc_info jz4740_soc_info = {
 	.needs_dev_clk = true,
 	.has_osd = false,
 	.map_noncoherent = false,
+	.has_pcfg = false,
+	.has_recover = false,
+	.has_rgbc = false,
 	.max_width = 800,
 	.max_height = 600,
 	.formats_f1 = jz4740_formats,
@@ -1496,6 +1525,9 @@ static const struct jz_soc_info jz4725b_soc_info = {
 	.needs_dev_clk = false,
 	.has_osd = true,
 	.map_noncoherent = false,
+	.has_pcfg = false,
+	.has_recover = false,
+	.has_rgbc = false,

This is wrong, the JZ4725B and JZ4770 SoCs both have the RGBC register and the RECOVER bit.

Cheers,
-Paul

 	.max_width = 800,
 	.max_height = 600,
 	.formats_f1 = jz4725b_formats_f1,
@@ -1509,6 +1541,9 @@ static const struct jz_soc_info jz4770_soc_info = {
 	.needs_dev_clk = false,
 	.has_osd = true,
 	.map_noncoherent = true,
+	.has_pcfg = false,
+	.has_recover = false,
+	.has_rgbc = false,
 	.max_width = 1280,
 	.max_height = 720,
 	.formats_f1 = jz4770_formats_f1,
@@ -1521,6 +1556,10 @@ static const struct jz_soc_info jz4770_soc_info = {
 static const struct jz_soc_info jz4780_soc_info = {
 	.needs_dev_clk = true,
 	.has_osd = true,
+	.has_alpha = true,
+	.has_pcfg = true,
+	.has_recover = true,
+	.has_rgbc = true,
 	.use_extended_hwdesc = true,
 	.max_width = 4096,
 	.max_height = 2048,
--
2.31.1







[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux