Re: [PATCH v3 12/13] drm/i915/dg2: configure TRANS_DP2_VFREQ{HIGH,LOW} for 128b/132b

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 09, 2021 at 03:52:04PM +0300, Jani Nikula wrote:
> There's a new register pair for 128b/132b mode where you need to set the
> pixel clock in Hz.
> 
> v2: Fix UHBR rate check, use intel_dp_is_uhbr() helper
> 
> Bspec: 54128
> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>

Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

> ---
>  drivers/gpu/drm/i915/display/intel_dp_mst.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> index d104441344c0..97af19fd9780 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> @@ -550,6 +550,17 @@ static void intel_mst_enable_dp(struct intel_atomic_state *state,
>  
>  	clear_act_sent(encoder, pipe_config);
>  
> +	if (intel_dp_is_uhbr(pipe_config)) {
> +		const struct drm_display_mode *adjusted_mode =
> +			&pipe_config->hw.adjusted_mode;
> +		u64 crtc_clock_hz = KHz(adjusted_mode->crtc_clock);
> +
> +		intel_de_write(dev_priv, TRANS_DP2_VFREQHIGH(pipe_config->cpu_transcoder),
> +			       TRANS_DP2_VFREQ_PIXEL_CLOCK(crtc_clock_hz >> 24));
> +		intel_de_write(dev_priv, TRANS_DP2_VFREQLOW(pipe_config->cpu_transcoder),
> +			       TRANS_DP2_VFREQ_PIXEL_CLOCK(crtc_clock_hz & 0xffffff));
> +	}
> +
>  	intel_ddi_enable_transcoder_func(encoder, pipe_config);
>  
>  	intel_de_rmw(dev_priv, TRANS_DDI_FUNC_CTL(trans), 0,
> -- 
> 2.30.2

-- 
Ville Syrjälä
Intel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux