Re: [PATCH V5 00/11] PCI/VGA: Rework default VGA device selection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Sep 11, 2021 at 05:30:45PM +0800, Huacai Chen wrote:
> My original work is at [1].
> 
> Current default VGA device selection fails in some cases:
> 
>   - On BMC system, the AST2500 bridge [1a03:1150] does not implement
>     PCI_BRIDGE_CTL_VGA [1].  This is perfectly legal but means the
>     legacy VGA resources won't reach downstream devices unless they're
>     included in the usual bridge windows.
> 
>   - vga_arb_select_default_device() will set a device below such a
>     bridge as the default VGA device as long as it has PCI_COMMAND_IO
>     and PCI_COMMAND_MEMORY enabled.
> 
>   - vga_arbiter_add_pci_device() is called for every VGA device,
>     either at boot-time or at hot-add time, and it will also set the
>     device as the default VGA device, but ONLY if all bridges leading
>     to it implement PCI_BRIDGE_CTL_VGA.
> 
>   - This difference between vga_arb_select_default_device() and
>     vga_arbiter_add_pci_device() means that a device below an AST2500
>     or similar bridge can only be set as the default if it is
>     enumerated before vga_arb_device_init().
> 
>   - On ACPI-based systems, PCI devices are enumerated by acpi_init(),
>     which runs before vga_arb_device_init().
> 
>   - On non-ACPI systems, like on MIPS system, they are enumerated by
>     pcibios_init(), which typically runs *after*
>     vga_arb_device_init().
> 
> So I made vga_arb_update_default_device() to replace the current vga_
> arb_select_default_device(), which will be call from vga_arbiter_add_
> pci_device(), set the default device even if it does not own the VGA
> resources because an upstream bridge doesn't implement PCI_BRIDGE_CTL_
> VGA. And the default VGA device is updated if a better one is found
> (device with legacy resources enabled is better, device owns the
> firmware framebuffer is even better).
> 
> Bjorn do some rework and extension in V2. It moves the VGA arbiter to
> the PCI subsystem, fixes a few nits, and breaks a few pieces to make
> the main patch a little smaller.
> 
> V3 rewrite the commit log of the last patch (which is also summarized
> by Bjorn).
> 
> V4 split the last patch to two steps.
> 
> V5 split big patches again and sort the patches.

Not sure if I'm missing something, or if this is an interim version
and you're working on a v6.

>From https://lore.kernel.org/r/20210909175926.GA996660@bjorn-Precision-5520,
I was looking for:

  BUT as I mentioned, I want the very first patch to be the very
  simple 2-line change to vga_arb_update_default_device() that actually
  fixes your problem.

That doesn't seem to be what we have here.

> All comments welcome!
> 
> [1] https://lore.kernel.org/dri-devel/20210705100503.1120643-1-chenhuacai@xxxxxxxxxxx/
> 
> Bjorn Helgaas (4):
>   PCI/VGA: Move vgaarb to drivers/pci
>   PCI/VGA: Remove empty vga_arb_device_card_gone()
>   PCI/VGA: Use unsigned format string to print lock counts
>   PCI/VGA: Replace full MIT license text with SPDX identifier
> 
> Huacai Chen (7):
>   PCI/VGA: Prefer vga_default_device()
>   PCI/VGA: Move vga_arb_integrated_gpu() earlier in file
>   PCI/VGA: Split out vga_arb_update_default_device()
>   PCI/VGA: Update default VGA device if a better one found
>   PCI/VGA: Update default VGA device again for X86/IA64
>   PCI/VGA: Remove vga_arb_select_default_device()
>   PCI/VGA: Log bridge control messages when adding devices
> 
> Signed-off-by: Huacai Chen <chenhuacai@xxxxxxxxxxx>
> Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> 
> ---
>  drivers/gpu/vga/Kconfig           |  19 ---
>  drivers/gpu/vga/Makefile          |   1 -
>  drivers/pci/Kconfig               |  19 +++
>  drivers/pci/Makefile              |   1 +
>  drivers/{gpu/vga => pci}/vgaarb.c | 269 ++++++++++++------------------
>  5 files changed, 126 insertions(+), 183 deletions(-)
>  rename drivers/{gpu/vga => pci}/vgaarb.c (90%)
> --
> 2.27.0
> 



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux