Re: [PATCH 3/3] drm/vc4: dsi: Switch to devm_drm_of_get_bridge

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 10, 2021 at 03:09:41PM +0200, Maxime Ripard wrote:
> The new devm_drm_of_get_bridge removes most of the boilerplate we
> have to deal with. Let's switch to it.
> 
> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>

With the includes updated:

Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx>

	Sam

> ---
>  drivers/gpu/drm/vc4/vc4_drv.c |  2 ++
>  drivers/gpu/drm/vc4/vc4_dsi.c | 28 ++++------------------------
>  2 files changed, 6 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c
> index 16abc3a3d601..96c526f1022e 100644
> --- a/drivers/gpu/drm/vc4/vc4_drv.c
> +++ b/drivers/gpu/drm/vc4/vc4_drv.c
> @@ -25,7 +25,9 @@
>  #include <linux/device.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/io.h>
> +#include <linux/i2c.h>
I fail to see why this include is needed?

>  #include <linux/module.h>
> +#include <linux/of_graph.h>
I think this should be drm_bridge.h.
And drm_bridge.h hopefully pulls in what is needed.

>  #include <linux/of_platform.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
> diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
> index a185027911ce..a229da58962a 100644
> --- a/drivers/gpu/drm/vc4/vc4_dsi.c
> +++ b/drivers/gpu/drm/vc4/vc4_dsi.c
> @@ -1497,7 +1497,6 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
>  	struct drm_device *drm = dev_get_drvdata(master);
>  	struct vc4_dsi *dsi = dev_get_drvdata(dev);
>  	struct vc4_dsi_encoder *vc4_dsi_encoder;
> -	struct drm_panel *panel;
>  	const struct of_device_id *match;
>  	dma_cap_mask_t dma_mask;
>  	int ret;
> @@ -1609,27 +1608,9 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
>  		return ret;
>  	}
>  
> -	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
> -					  &panel, &dsi->bridge);
> -	if (ret) {
> -		/* If the bridge or panel pointed by dev->of_node is not
> -		 * enabled, just return 0 here so that we don't prevent the DRM
> -		 * dev from being registered. Of course that means the DSI
> -		 * encoder won't be exposed, but that's not a problem since
> -		 * nothing is connected to it.
> -		 */
> -		if (ret == -ENODEV)
> -			return 0;
> -
> -		return ret;
> -	}
> -
> -	if (panel) {
> -		dsi->bridge = devm_drm_panel_bridge_add_typed(dev, panel,
> -							      DRM_MODE_CONNECTOR_DSI);
> -		if (IS_ERR(dsi->bridge))
> -			return PTR_ERR(dsi->bridge);
> -	}
> +	dsi->bridge = devm_drm_of_get_bridge(dev, dev->of_node, 0, 0);
> +	if (IS_ERR(dsi->bridge))
> +		return PTR_ERR(dsi->bridge);
>  
>  	/* The esc clock rate is supposed to always be 100Mhz. */
>  	ret = clk_set_rate(dsi->escape_clock, 100 * 1000000);
> @@ -1667,8 +1648,7 @@ static void vc4_dsi_unbind(struct device *dev, struct device *master,
>  {
>  	struct vc4_dsi *dsi = dev_get_drvdata(dev);
>  
> -	if (dsi->bridge)
> -		pm_runtime_disable(dev);
> +	pm_runtime_disable(dev);
>  
>  	/*
>  	 * Restore the bridge_chain so the bridge detach procedure can happen
> -- 
> 2.31.1



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux