add MERGE additional properties description for mt8195: 1. async clock 2. fifo setting enable 3. reset controller Signed-off-by: jason-jh.lin <jason-jh.lin@xxxxxxxxxxxx> --- .../display/mediatek/mediatek,merge.yaml | 30 +++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml index 75beeb207ceb..0fe204d9ad2c 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml @@ -38,6 +38,19 @@ properties: clocks: items: - description: MERGE Clock + - description: MERGE Async Clock + Controlling the synchronous process between MERGE and other display + function blocks cross clock domain. + + mediatek,merge-fifo-en: + description: + The setting of merge fifo is mainly provided for the display latency + buffer to ensure that the back-end panel display data will not be + underrun, a little more data is needed in the fifo. + According to the merge fifo settings, when the water level is detected + to be insufficient, it will trigger RDMA sending ultra and preulra + command to SMI to speed up the data rate. + type: boolean mediatek,gce-client-reg: description: @@ -50,6 +63,10 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 + resets: + description: reset controller + See Documentation/devicetree/bindings/reset/reset.txt for details. + required: - compatible - reg @@ -67,3 +84,16 @@ examples: power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_MERGE>; }; + + merge5: disp_vpp_merge5@1c110000 { + compatible = "mediatek,mt8195-disp-merge"; + reg = <0 0x1c110000 0 0x1000>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_VPP_MERGE4>, + <&vdosys1 CLK_VDO1_MERGE4_DL_ASYNC>; + clock-names = "merge","merge_async"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1c11XXXX 0x0000 0x1000>; + mediatek,merge-fifo-en = <1>; + resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE4_DL_ASYNC>; + }; -- 2.18.0