Hi Markus, On Mon, Sep 06, 2021 at 09:35:24PM +0200, Markus Schneider-Pargmann wrote: > DP_INTF is similar to the actual dpi. They differ in some points > regarding registers and what needs to be set but the function blocks > itself are similar in design. > > Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx> I fail to see why they share the same dt-schema as the main content in the schema is the clocks and they differ. A new mediatek,dpintf schema seems more appropriate. I recall I though so when reading the RFC variant but failed to comment on it. Sam > --- > .../display/mediatek/mediatek,dpi.yaml | 43 ++++++++++++++++--- > 1 file changed, 37 insertions(+), 6 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml > index dd2896a40ff0..1a158b719ce6 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml > @@ -4,7 +4,7 @@ > $id: http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml# > $schema: http://devicetree.org/meta-schemas/core.yaml# > > -title: mediatek DPI Controller Device Tree Bindings > +title: mediatek DPI/DP_INTF Controller Device Tree Bindings > > maintainers: > - CK Hu <ck.hu@xxxxxxxxxxxx> > @@ -13,7 +13,8 @@ maintainers: > description: | > The Mediatek DPI function block is a sink of the display subsystem and > provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel > - output bus. > + output bus. The Mediatek DP_INTF is a similar function block that is > + connected to the (embedded) display port function block. > > properties: > compatible: > @@ -23,6 +24,7 @@ properties: > - mediatek,mt8173-dpi > - mediatek,mt8183-dpi > - mediatek,mt8192-dpi > + - mediatek,mt8195-dpintf > > reg: > maxItems: 1 > @@ -37,10 +39,11 @@ properties: > - description: DPI PLL > > clock-names: > - items: > - - const: pixel > - - const: engine > - - const: pll > + description: > + For dpi clocks pixel, engine and pll are required. For dpintf pixel, > + hf_fmm and hf_fdp are required. > + minItems: 3 > + maxItems: 3 > > pinctrl-0: true > pinctrl-1: true > @@ -64,6 +67,34 @@ required: > - clock-names > - port > > +allOf: > + - if: > + properties: > + compatible: > + contains: > + enum: > + - mediatek,mt8195-dpintf > + then: > + properties: > + clocks: > + minItems: 3 > + maxItems: 3 > + clock-names: > + items: > + - const: pixel > + - const: hf_fmm > + - const: hf_fdp > + else: > + properties: > + clocks: > + minItems: 3 > + maxItems: 3 > + clock-names: > + items: > + - const: pixel > + - const: engine > + - const: pll > + > additionalProperties: false > > examples: > -- > 2.33.0
