Re: [PATCH 8/8] drm/i915/perf: Map OA buffer to user space for gen12 performance query

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Aug 30, 2021 at 12:38:51PM -0700, Umesh Nerlige Ramappa wrote:
> i915 used to support time based sampling mode which is good for overall
> system monitoring, but is not enough for query mode used to measure a
> single draw call or dispatch. Gen9-Gen11 are using current i915 perf
> implementation for query, but Gen12+ requires a new approach for query
> based on triggered reports within oa buffer.
> 
> Triggering reports into the OA buffer is achieved by writing into a
> a trigger register. Optionally an unused counter/register is set with a
> marker value such that a triggered report can be identified in the OA
> buffer. Reports are usually triggered at the start and end of work that
> is measured.
> 
> Since OA buffer is large and queries can be frequent, an efficient way
> to look for triggered reports is required. By knowing the current head
> and tail offsets into the OA buffer, it is easier to determine the
> locality of the reports of interest.
> 
> Current perf OA interface does not expose head/tail information to the
> user and it filters out invalid reports before sending data to user.
> Also considering limited size of user buffer used during a query,
> creating a 1:1 copy of the OA buffer at the user space added undesired
> complexity.
> 
> The solution was to map the OA buffer to user space provided
> 
> (1) that it is accessed from a privileged user.
> (2) OA report filtering is not used.
> 
> These 2 conditions would satisfy the safety criteria that the current
> perf interface addresses.

This is a perf improvement. Please include benchmark numbers to justify
it.

> 
> To enable the query:
> - Add an ioctl to expose head and tail to the user
> - Add an ioctl to return size and offset of the OA buffer
> - Map the OA buffer to the user space
> 
> v2:
> - Improve commit message (Chris)
> - Do not mmap based on gem object filp. Instead, use perf_fd and support
>   mmap syscall (Chris)
> - Pass non-zero offset in mmap to enforce the right object is
>   mapped (Chris)
> - Do not expose gpu_address (Chris)
> - Verify start and length of vma for page alignment (Lionel)
> - Move SQNTL config out (Lionel)
> 
> v3: (Chris)
> - Omit redundant checks
> - Return VM_FAULT_SIGBUS is old stream is closed
> - Maintain reference counts to stream in vm_open and vm_close
> - Use switch to identify object to be mapped
> 
> v4: Call kref_put on closing perf fd (Chris)
> v5:
> - Strip access to OA buffer from unprivileged child of a privileged
>   parent. Use VM_DONTCOPY
> - Enforce MAP_PRIVATE by checking for VM_MAYSHARE
> 
> v6:
> (Chris)
> - Use len of -1 in unmap_mapping_range
> - Don't use stream->oa_buffer.vma->obj in vm_fault_oa
> - Use kernel block comment style
> - do_mmap gets a reference to the file and puts it in do_munmap, so
>   no need to maintain a reference to i915_perf_stream. Hence, remove
>   vm_open/vm_close and stream->closed hooks/checks.
> (Umesh)
> - Do not allow mmap if SAMPLE_OA_REPORT is not set during
>   i915_perf_open_ioctl.
> - Drop ioctl returning head/tail since this information is already
>   whitelisted. Remove hooks to read head register.
> 
> v7: (Chris)
> - unmap before destroy
> - change ioctl argument struct
> 
> v8: Documentation and more checks (Chris)
> v9: Fix comment style (Umesh)
> v10: Update uapi comment (Ashutosh)
> 
> Signed-off-by: Piotr Maciejewski <piotr.maciejewski@xxxxxxxxx>
> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@xxxxxxxxx>
> Reviewed-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/gem/i915_gem_mman.c |   2 +-
>  drivers/gpu/drm/i915/gem/i915_gem_mman.h |   2 +
>  drivers/gpu/drm/i915/i915_perf.c         | 126 ++++++++++++++++++++++-
>  include/uapi/drm/i915_drm.h              |  33 ++++++
>  4 files changed, 161 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/gem/i915_gem_mman.c b/drivers/gpu/drm/i915/gem/i915_gem_mman.c
> index 5130e8ed9564..84cdce2ee447 100644
> --- a/drivers/gpu/drm/i915/gem/i915_gem_mman.c
> +++ b/drivers/gpu/drm/i915/gem/i915_gem_mman.c
> @@ -213,7 +213,7 @@ compute_partial_view(const struct drm_i915_gem_object *obj,
>  	return view;
>  }
>  
> -static vm_fault_t i915_error_to_vmf_fault(int err)
> +vm_fault_t i915_error_to_vmf_fault(int err)
>  {
>  	switch (err) {
>  	default:
> diff --git a/drivers/gpu/drm/i915/gem/i915_gem_mman.h b/drivers/gpu/drm/i915/gem/i915_gem_mman.h
> index efee9e0d2508..1190a3a228ea 100644
> --- a/drivers/gpu/drm/i915/gem/i915_gem_mman.h
> +++ b/drivers/gpu/drm/i915/gem/i915_gem_mman.h
> @@ -29,4 +29,6 @@ void i915_gem_object_release_mmap_gtt(struct drm_i915_gem_object *obj);
>  
>  void i915_gem_object_release_mmap_offset(struct drm_i915_gem_object *obj);
>  
> +vm_fault_t i915_error_to_vmf_fault(int err);
> +
>  #endif
> diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c
> index de3d1738aabe..1f8d4f3a2148 100644
> --- a/drivers/gpu/drm/i915/i915_perf.c
> +++ b/drivers/gpu/drm/i915/i915_perf.c
> @@ -192,10 +192,12 @@
>   */
>  
>  #include <linux/anon_inodes.h>
> +#include <linux/mman.h>
>  #include <linux/sizes.h>
>  #include <linux/uuid.h>
>  
>  #include "gem/i915_gem_context.h"
> +#include "gem/i915_gem_mman.h"
>  #include "gt/intel_engine_pm.h"
>  #include "gt/intel_engine_user.h"
>  #include "gt/intel_execlists_submission.h"
> @@ -3322,6 +3324,44 @@ static long i915_perf_config_locked(struct i915_perf_stream *stream,
>  	return ret;
>  }
>  
> +#define I915_PERF_OA_BUFFER_MMAP_OFFSET 1
> +
> +/**
> + * i915_perf_oa_buffer_info_locked - size and offset of the OA buffer
> + * @stream: i915 perf stream
> + * @cmd: ioctl command
> + * @arg: pointer to oa buffer info filled by this function.
> + */
> +static int i915_perf_oa_buffer_info_locked(struct i915_perf_stream *stream,
> +					   unsigned int cmd,
> +					   unsigned long arg)
> +{
> +	struct drm_i915_perf_oa_buffer_info info;
> +	void __user *output = (void __user *)arg;
> +
> +	if (i915_perf_stream_paranoid && !perfmon_capable()) {
> +		DRM_DEBUG("Insufficient privileges to access OA buffer info\n");
> +		return -EACCES;
> +	}
> +
> +	if (_IOC_SIZE(cmd) != sizeof(info))
> +		return -EINVAL;
> +
> +	if (copy_from_user(&info, output, sizeof(info)))
> +		return -EFAULT;
> +
> +	if (info.type || info.flags || info.rsvd)
> +		return -EINVAL;
> +
> +	info.size = stream->oa_buffer.vma->size;
> +	info.offset = I915_PERF_OA_BUFFER_MMAP_OFFSET * PAGE_SIZE;
> +
> +	if (copy_to_user(output, &info, sizeof(info)))
> +		return -EFAULT;
> +
> +	return 0;
> +}
> +
>  /**
>   * i915_perf_ioctl_locked - support ioctl() usage with i915 perf stream FDs
>   * @stream: An i915 perf stream
> @@ -3347,6 +3387,8 @@ static long i915_perf_ioctl_locked(struct i915_perf_stream *stream,
>  		return 0;
>  	case I915_PERF_IOCTL_CONFIG:
>  		return i915_perf_config_locked(stream, arg);
> +	case I915_PERF_IOCTL_GET_OA_BUFFER_INFO:
> +		return i915_perf_oa_buffer_info_locked(stream, cmd, arg);
>  	}
>  
>  	return -EINVAL;
> @@ -3418,6 +3460,14 @@ static int i915_perf_release(struct inode *inode, struct file *file)
>  	struct i915_perf_stream *stream = file->private_data;
>  	struct i915_perf *perf = stream->perf;
>  
> +	/*
> +	 * User could have multiple vmas from multiple mmaps. We want to zap
> +	 * them all here. Note that a fresh fault cannot occur as the mmap holds
> +	 * a reference to the stream via the vma->vm_file, so before user's
> +	 * munmap, the stream cannot be destroyed.
> +	 */
> +	unmap_mapping_range(file->f_mapping, 0, -1, 1);
> +
>  	mutex_lock(&perf->lock);
>  	i915_perf_destroy_locked(stream);
>  	mutex_unlock(&perf->lock);
> @@ -3428,6 +3478,75 @@ static int i915_perf_release(struct inode *inode, struct file *file)
>  	return 0;
>  }
>  
> +static vm_fault_t vm_fault_oa(struct vm_fault *vmf)
> +{
> +	struct vm_area_struct *vma = vmf->vma;
> +	struct i915_perf_stream *stream = vma->vm_private_data;
> +	int err;
> +
> +	err = remap_io_sg(vma,
> +			  vma->vm_start, vma->vm_end - vma->vm_start,
> +			  stream->oa_buffer.vma->pages->sgl, -1);
> +
> +	return i915_error_to_vmf_fault(err);
> +}
> +
> +static const struct vm_operations_struct vm_ops_oa = {
> +	.fault = vm_fault_oa,
> +};
> +
> +static int i915_perf_mmap(struct file *file, struct vm_area_struct *vma)
> +{
> +	struct i915_perf_stream *stream = file->private_data;
> +
> +	/* mmap-ing OA buffer to user space MUST absolutely be privileged */
> +	if (i915_perf_stream_paranoid && !perfmon_capable()) {
> +		DRM_DEBUG("Insufficient privileges to map OA buffer\n");
> +		return -EACCES;
> +	}
> +
> +	switch (vma->vm_pgoff) {
> +	/*
> +	 * A non-zero offset ensures that we are mapping the right object. Also
> +	 * leaves room for future objects added to this implementation.
> +	 */
> +	case I915_PERF_OA_BUFFER_MMAP_OFFSET:
> +		if (!(stream->sample_flags & SAMPLE_OA_REPORT))
> +			return -EINVAL;
> +
> +		if (vma->vm_end - vma->vm_start > stream->oa_buffer.vma->size)
> +			return -EINVAL;
> +
> +		/*
> +		 * Only support VM_READ. Enforce MAP_PRIVATE by checking for
> +		 * VM_MAYSHARE.
> +		 */
> +		if (vma->vm_flags & (VM_WRITE | VM_EXEC |
> +				     VM_SHARED | VM_MAYSHARE))
> +			return -EINVAL;
> +
> +		vma->vm_flags &= ~(VM_MAYWRITE | VM_MAYEXEC);
> +
> +		/*
> +		 * If the privileged parent forks and child drops root
> +		 * privilege, we do not want the child to retain access to the
> +		 * mapped OA buffer. Explicitly set VM_DONTCOPY to avoid such
> +		 * cases.
> +		 */
> +		vma->vm_flags |= VM_PFNMAP | VM_DONTEXPAND |
> +				 VM_DONTDUMP | VM_DONTCOPY;
> +		break;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	vma->vm_page_prot = vm_get_page_prot(vma->vm_flags);
> +	vma->vm_private_data = stream;
> +	vma->vm_ops = &vm_ops_oa;
> +
> +	return 0;
> +}
>  
>  static const struct file_operations fops = {
>  	.owner		= THIS_MODULE,
> @@ -3440,6 +3559,7 @@ static const struct file_operations fops = {
>  	 * to handle 32bits compatibility.
>  	 */
>  	.compat_ioctl   = i915_perf_ioctl,
> +	.mmap		= i915_perf_mmap,
>  };
>  
>  
> @@ -4639,8 +4759,12 @@ int i915_perf_ioctl_version(void)
>  	 *
>  	 *    - OA buffer head/tail/status/buffer registers for read only
>  	 *    - OA counters A18, A19, A20 for read/write
> +	 *
> +	 * 8: Added an option to map oa buffer at umd driver level and trigger
> +	 *    oa reports within oa buffer from command buffer. See
> +	 *    I915_PERF_IOCTL_GET_OA_BUFFER_INFO.
>  	 */
> -	return 7;
> +	return 8;
>  }
>  
>  #if IS_ENABLED(CONFIG_DRM_I915_SELFTEST)
> diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h
> index bde5860b3686..2c17fe845604 100644
> --- a/include/uapi/drm/i915_drm.h
> +++ b/include/uapi/drm/i915_drm.h
> @@ -2417,6 +2417,39 @@ struct drm_i915_perf_open_param {
>   */
>  #define I915_PERF_IOCTL_CONFIG	_IO('i', 0x2)
>  
> +/*

Please make this proper kerneldoc. Ideally also fix up all the other perf
related uapi and also document it all with kerneldoc.

Please make sure the result looks good with

$ make htmldocs

Also, this is uapi, therefore your patch needs to include
- link to the igts for this
- link to the userspace MR that uses this (I guess it's mesa?)

Cheers, Daniel

> + * Returns OA buffer properties to be used with mmap.
> + *
> + * This ioctl is available in perf revision 8.
> + */
> +#define I915_PERF_IOCTL_GET_OA_BUFFER_INFO _IOWR('i', 0x3, struct drm_i915_perf_oa_buffer_info)
> +
> +/*
> + * OA buffer size and offset.
> + *
> + * OA output buffer
> + *   type: 0
> + *   flags: mbz
> + *
> + *   After querying the info, pass (size,offset) to mmap(),
> + *
> + *   mmap(0, info.size, PROT_READ, MAP_PRIVATE, perf_fd, info.offset).
> + *
> + *   Note that only a private (not shared between processes, or across fork())
> + *   read-only mmapping is allowed.
> + *
> + *   HW is continually writing data to the mapped  OA buffer and it conforms to
> + *   the OA format as specified by user config. The buffer provides reports that
> + *   have OA counters - A, B and C.
> + */
> +struct drm_i915_perf_oa_buffer_info {
> +	__u32 type;   /* in */
> +	__u32 flags;  /* in */
> +	__u64 size;   /* out */
> +	__u64 offset; /* out */
> +	__u64 rsvd;   /* mbz */
> +};
> +
>  /*
>   * Common to all i915 perf records
>   */
> -- 
> 2.20.1
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux