On Sat, 28 Aug 2021 12:26:39 +0100, Paul Cercueil wrote: > Add binding for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3 > 24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit > interface. > > Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx> > --- > .../bindings/display/panel/auo,a030jtn01.yaml | 57 +++++++++++++++++++ > 1 file changed, 57 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dts:23.11-21: Warning (reg_format): /example-0/panel@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dt.yaml: example-0: panel@0:reg:0: [0] is too short From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1521878 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
