Re: [PATCH v3 13/15] drm/mediatek: add ovl_adaptor support for MT8195

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Chun-Kuang,

Thanks for the review.

On Sun, 2021-08-22 at 07:47 +0800, Chun-Kuang Hu wrote:
> Hi, Nancy:
> 
> Nancy.Lin <nancy.lin@xxxxxxxxxxxx> 於 2021年8月18日 週三 下午5:19寫道:
> > 
> > Add ovl_adaptor driver for MT8195.
> > Ovl_adaptor is an encapsulated module and designed for simplified
> > DRM control flow. This module is composed of 8 RDMAs, 4 MERGEs and
> > an ETHDR. Two RDMAs merge into one layer, so this module support 4
> > layers.
> > 
> > Signed-off-by: Nancy.Lin <nancy.lin@xxxxxxxxxxxx>
> > ---
> >  drivers/gpu/drm/mediatek/Makefile             |   3 +-
> >  .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   | 528
> > ++++++++++++++++++
> >  .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.h   |  19 +
> >  3 files changed, 549 insertions(+), 1 deletion(-)
> >  create mode 100644 drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> >  create mode 100644 drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.h
> > 
> > diff --git a/drivers/gpu/drm/mediatek/Makefile
> > b/drivers/gpu/drm/mediatek/Makefile
> > index 38ec2354a894..f04ac86c9593 100644
> > --- a/drivers/gpu/drm/mediatek/Makefile
> > +++ b/drivers/gpu/drm/mediatek/Makefile
> > @@ -13,7 +13,8 @@ mediatek-drm-y := mtk_disp_ccorr.o \
> >                   mtk_drm_plane.o \
> >                   mtk_dsi.o \
> >                   mtk_dpi.o \
> > -                 mtk_mdp_rdma.o
> > +                 mtk_mdp_rdma.o \
> > +                 mtk_disp_ovl_adaptor.o
> 
> Alphabetic order.
> 
OK.
> > 
> >  obj-$(CONFIG_DRM_MEDIATEK) += mediatek-drm.o
> > 
> > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> > b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> > new file mode 100644
> > index 000000000000..8222ec5ff799
> > --- /dev/null
> > +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> > @@ -0,0 +1,528 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (c) 2021 MediaTek Inc.
> > + */
> > +
> > +#include <drm/drm_fourcc.h>
> > +#include <linux/clk.h>
> > +#include <linux/reset.h>
> > +#include <linux/component.h>
> 
> Alphabetic order.

OK.
> 
> > +#include <linux/of_device.h>
> > +#include <linux/of_address.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/soc/mediatek/mtk-mmsys.h>
> > +#include <linux/soc/mediatek/mtk-cmdq.h>
> > +
> > +#include "mtk_drm_drv.h"
> > +#include "mtk_drm_crtc.h"
> > +#include "mtk_drm_ddp_comp.h"
> > +#include "mtk_disp_drv.h"
> > +#include "mtk_disp_ovl_adaptor.h"
> > +
> > +#define DISP_MERGE_ENABLE      0x0
> > +       #define MERGE_ENABLE BIT(0)
> 
> I would like
> 
> #define DISP_MERGE_ENABLE      0x0
> #define MERGE_ENABLE                           BIT(0)
> 
I will use merge common driver instead of ovl merge driver. Will remove
merge related part.

> > +#define DISP_MERGE_CFG_0       0x10
> > +#define DISP_MERGE_CFG_1       0x14
> > +#define DISP_MERGE_CFG_4       0x20
> > +#define DISP_MERGE_CFG_5       0x24
> > +#define DISP_MERGE_CFG_10      0x38
> > +       #define CFG_10_NO_SWAP 0
> > +#define DISP_MERGE_CFG_12      0x40
> > +       #define CFG12_10_10_1PI_2PO_BUF_MODE 6
> > +       #define CFG12_11_10_1PI_2PO_MERGE 18
> > +#define DISP_MERGE_CFG_24      0x70
> > +#define DISP_MERGE_CFG_25      0x74
> > +#define DISP_MERGE_CFG_26      0x78
> > +#define DISP_MERGE_CFG_27      0x7c
> > +#define DISP_MERGE_MUTE_0      0xf00
> > +
> > +#define MTK_OVL_ADAPTOR_RDMA_MAX_WIDTH 1920
> > +#define MTK_OVL_ADAPTOR_LAYER_NUM 4
> > +
> > +enum mtk_ovl_adaptor_comp_type {
> > +       OVL_ADAPTOR_TYPE_RDMA = 0,
> > +       OVL_ADAPTOR_TYPE_MERGE,
> > +       OVL_ADAPTOR_TYPE_NUM,
> > +};
> > +
> > +enum mtk_ovl_adaptor_comp_id {
> > +       OVL_ADAPTOR_MDP_RDMA0,
> > +       OVL_ADAPTOR_MDP_RDMA1,
> > +       OVL_ADAPTOR_MDP_RDMA2,
> > +       OVL_ADAPTOR_MDP_RDMA3,
> > +       OVL_ADAPTOR_MDP_RDMA4,
> > +       OVL_ADAPTOR_MDP_RDMA5,
> > +       OVL_ADAPTOR_MDP_RDMA6,
> > +       OVL_ADAPTOR_MDP_RDMA7,
> > +       OVL_ADAPTOR_MERGE0,
> > +       OVL_ADAPTOR_MERGE1,
> > +       OVL_ADAPTOR_MERGE2,
> > +       OVL_ADAPTOR_MERGE3,
> > +       OVL_ADAPTOR_ID_MAX
> > +};
> > +
> > +struct ovl_adaptor_comp_match {
> > +       enum mtk_ovl_adaptor_comp_type type;
> > +       int alias_id;
> > +};
> > +
> > +struct ovl_adaptor_merge_config {
> > +       unsigned int fmt;
> > +       unsigned int merge_mode;
> > +       unsigned int in_w[2];
> > +       unsigned int out_w[2];
> > +       unsigned int in_h;
> > +};
> > +
> > +struct mtk_ovl_adaptor_comp {
> > +       struct device *dev;
> > +       struct clk *clks[2];
> > +       struct cmdq_client_reg cmdq_base;
> > +       void __iomem *regs;
> > +};
> 
> keep only dev, other value should be moved to dev private data.
> 
OK.
> > +
> > +struct mtk_disp_ovl_adaptor {
> > +       struct mtk_ovl_adaptor_comp
> > ovl_adaptor_comp[OVL_ADAPTOR_ID_MAX];
> > +       struct device *mmsys_dev;
> > +};
> > +
> > +static const char * const ovl_adaptor_comp_str[] = {
> > +       "OVL_ADAPTOR_MDP_RDMA0",
> > +       "OVL_ADAPTOR_MDP_RDMA1",
> > +       "OVL_ADAPTOR_MDP_RDMA2",
> > +       "OVL_ADAPTOR_MDP_RDMA3",
> > +       "OVL_ADAPTOR_MDP_RDMA4",
> > +       "OVL_ADAPTOR_MDP_RDMA5",
> > +       "OVL_ADAPTOR_MDP_RDMA6",
> > +       "OVL_ADAPTOR_MDP_RDMA7",
> > +       "OVL_ADAPTOR_MERGE0",
> > +       "OVL_ADAPTOR_MERGE1",
> > +       "OVL_ADAPTOR_MERGE2",
> > +       "OVL_ADAPTOR_MERGE3",
> > +       "OVL_ADAPTOR_ID_MAX"
> > +};
> > +
> > +static const char * const private_comp_stem[OVL_ADAPTOR_TYPE_NUM]
> > = {
> > +       [OVL_ADAPTOR_TYPE_RDMA] = "vdo1_rdma",
> > +       [OVL_ADAPTOR_TYPE_MERGE] = "merge",
> > +};
> > +
> > +static const struct ovl_adaptor_comp_match
> > comp_matches[OVL_ADAPTOR_ID_MAX] = {
> > +       [OVL_ADAPTOR_MDP_RDMA0] =       { OVL_ADAPTOR_TYPE_RDMA, 0
> > },
> > +       [OVL_ADAPTOR_MDP_RDMA1] =       { OVL_ADAPTOR_TYPE_RDMA, 1
> > },
> > +       [OVL_ADAPTOR_MDP_RDMA2] =       { OVL_ADAPTOR_TYPE_RDMA, 2
> > },
> > +       [OVL_ADAPTOR_MDP_RDMA3] =       { OVL_ADAPTOR_TYPE_RDMA, 3
> > },
> > +       [OVL_ADAPTOR_MDP_RDMA4] =       { OVL_ADAPTOR_TYPE_RDMA, 4
> > },
> > +       [OVL_ADAPTOR_MDP_RDMA5] =       { OVL_ADAPTOR_TYPE_RDMA, 5
> > },
> > +       [OVL_ADAPTOR_MDP_RDMA6] =       { OVL_ADAPTOR_TYPE_RDMA, 6
> > },
> > +       [OVL_ADAPTOR_MDP_RDMA7] =       { OVL_ADAPTOR_TYPE_RDMA, 7
> > },
> > +       [OVL_ADAPTOR_MERGE0] =  { OVL_ADAPTOR_TYPE_MERGE, 1 },
> > +       [OVL_ADAPTOR_MERGE1] =  { OVL_ADAPTOR_TYPE_MERGE, 2 },
> > +       [OVL_ADAPTOR_MERGE2] =  { OVL_ADAPTOR_TYPE_MERGE, 3 },
> > +       [OVL_ADAPTOR_MERGE3] =  { OVL_ADAPTOR_TYPE_MERGE, 4 },
> > +};
> > +
> > +static void mtk_ovl_adaptor_merge_config(struct
> > mtk_ovl_adaptor_comp *comp,
> > +                                        struct
> > ovl_adaptor_merge_config *merge_cfg,
> > +                                        struct cmdq_pkt *cmdq_pkt)
> > +{
> > +       switch (merge_cfg->merge_mode) {
> > +       case 6:
> > +               mtk_ddp_write(cmdq_pkt, (merge_cfg->in_h << 16 |
> > merge_cfg->in_w[0]),
> > +                             &comp->cmdq_base, comp->regs,
> > DISP_MERGE_CFG_0);
> > +               mtk_ddp_write(cmdq_pkt, (merge_cfg->in_h << 16 |
> > merge_cfg->out_w[0]),
> > +                             &comp->cmdq_base, comp->regs,
> > DISP_MERGE_CFG_4);
> > +               mtk_ddp_write(cmdq_pkt, (merge_cfg->in_h << 16 |
> > merge_cfg->in_w[0]),
> > +                             &comp->cmdq_base, comp->regs,
> > DISP_MERGE_CFG_24);
> > +               mtk_ddp_write(cmdq_pkt, (merge_cfg->in_h << 16 |
> > merge_cfg->in_w[0]),
> > +                             &comp->cmdq_base, comp->regs,
> > DISP_MERGE_CFG_25);
> > +               break;
> > +       case 18:
> > +               mtk_ddp_write(cmdq_pkt, (merge_cfg->in_h << 16 |
> > merge_cfg->in_w[0]),
> > +                             &comp->cmdq_base, comp->regs,
> > DISP_MERGE_CFG_0);
> > +               mtk_ddp_write(cmdq_pkt, (merge_cfg->in_h << 16 |
> > merge_cfg->in_w[1]),
> > +                             &comp->cmdq_base, comp->regs,
> > DISP_MERGE_CFG_1);
> > +               mtk_ddp_write(cmdq_pkt, (merge_cfg->in_h << 16 |
> > merge_cfg->out_w[0]),
> > +                             &comp->cmdq_base, comp->regs,
> > DISP_MERGE_CFG_4);
> > +               mtk_ddp_write(cmdq_pkt, (merge_cfg->in_h << 16 |
> > merge_cfg->in_w[0]),
> > +                             &comp->cmdq_base, comp->regs,
> > DISP_MERGE_CFG_24);
> > +               mtk_ddp_write(cmdq_pkt, (merge_cfg->in_h << 16 |
> > merge_cfg->in_w[1]),
> > +                             &comp->cmdq_base, comp->regs,
> > DISP_MERGE_CFG_25);
> > +               mtk_ddp_write(cmdq_pkt, (merge_cfg->in_h << 16 |
> > merge_cfg->in_w[0]),
> > +                             &comp->cmdq_base, comp->regs,
> > DISP_MERGE_CFG_26);
> > +               mtk_ddp_write(cmdq_pkt, (merge_cfg->in_h << 16 |
> > merge_cfg->in_w[1]),
> > +                             &comp->cmdq_base, comp->regs,
> > DISP_MERGE_CFG_27);
> > +               break;
> > +       default:
> > +               break;
> > +       }
> > +
> > +       mtk_ddp_write(cmdq_pkt, merge_cfg->merge_mode, &comp-
> > >cmdq_base,
> > +                     comp->regs, DISP_MERGE_CFG_12);
> > +       mtk_ddp_write(cmdq_pkt, CFG_10_NO_SWAP, &comp->cmdq_base,
> > +                     comp->regs, DISP_MERGE_CFG_10);
> > +       mtk_ddp_write_mask(cmdq_pkt, 1, &comp->cmdq_base, comp-
> > >regs,
> > +                          DISP_MERGE_ENABLE, MERGE_ENABLE);
> 
> Move this function to merge driver.
> 
OK.
> > +}
> > +
> > +void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int
> > idx,
> > +                                 struct mtk_plane_state *state,
> > +                                 struct cmdq_pkt *cmdq_pkt)
> > +{
> > +       struct mtk_disp_ovl_adaptor *ovl_adaptor =
> > dev_get_drvdata(dev);
> > +       struct mtk_plane_pending_state *pending = &state->pending;
> > +       struct ovl_adaptor_merge_config merge_cfg = {0};
> > +       struct mtk_mdp_rdma_cfg rdma_config = {0};
> > +       struct mtk_ovl_adaptor_comp *rdma_l;
> > +       struct mtk_ovl_adaptor_comp *rdma_r;
> > +       struct mtk_ovl_adaptor_comp *merge;
> > +       const struct drm_format_info *fmt_info =
> > drm_format_info(pending->format);
> > +       bool use_dual_pipe = false;
> > +
> > +       dev_dbg(dev, "%s+ idx:%d, enable:%d, fmt:0x%x\n", __func__,
> > idx,
> > +               pending->enable, pending->format);
> > +       dev_dbg(dev, "addr 0x%lx, fb w:%d, {%d,%d,%d,%d}\n",
> > +               pending->addr, (pending->pitch / fmt_info->cpp[0]),
> > +               pending->x, pending->y, pending->width, pending-
> > >height);
> > +
> > +       rdma_l = &ovl_adaptor-
> > >ovl_adaptor_comp[OVL_ADAPTOR_MDP_RDMA0 + 2 * idx];
> > +       rdma_r = &ovl_adaptor-
> > >ovl_adaptor_comp[OVL_ADAPTOR_MDP_RDMA0 + 2 * idx + 1];
> > +       merge = &ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_MERGE0 +
> > idx];
> > +
> > +       if (!pending->enable) {
> > +               mtk_ddp_write_mask(cmdq_pkt, 0x0, &merge-
> > >cmdq_base, merge->regs,
> > +                                  DISP_MERGE_ENABLE,
> > MERGE_ENABLE);
> 
> Ditto.

OK.
> 
> > +               mtk_mdp_rdma_stop(rdma_l->regs, cmdq_pkt, &rdma_l-
> > >cmdq_base);
> > +               mtk_mdp_rdma_stop(rdma_r->regs, cmdq_pkt, &rdma_r-
> > >cmdq_base);
> > +               return;
> > +       }
> > +
> > +       if (pending->width > MTK_OVL_ADAPTOR_RDMA_MAX_WIDTH)
> > +               use_dual_pipe = true;
> > +
> > +       merge_cfg.out_w[0] = pending->width;
> > +       merge_cfg.in_h = pending->height;
> > +       merge_cfg.fmt = pending->format;
> > +       if (use_dual_pipe) {
> > +               merge_cfg.merge_mode = CFG12_11_10_1PI_2PO_MERGE;
> > +               merge_cfg.in_w[0] = (pending->width / 2) +
> > ((pending->width / 2) % 2);
> > +               merge_cfg.in_w[1] = (pending->width / 2) -
> > ((pending->width / 2) % 2);
> 
> merge_cfg.in_w[1] = pending->width - merge_cfg.in_w[0];
> 
> > +       } else {
> > +               merge_cfg.merge_mode =
> > CFG12_10_10_1PI_2PO_BUF_MODE;
> > +               merge_cfg.in_w[0] = pending->width;
> > +       }
> > +       mtk_ovl_adaptor_merge_config(merge, &merge_cfg, cmdq_pkt);
> > +
> > +       mtk_mmsys_ddp_config(ovl_adaptor->mmsys_dev,
> > MMSYS_CONFIG_MERGE_ASYNC_WIDTH,
> > +                            idx, pending->width / 2, cmdq_pkt);
> > +       mtk_mmsys_ddp_config(ovl_adaptor->mmsys_dev,
> > MMSYS_CONFIG_MERGE_ASYNC_HEIGHT,
> > +                            idx, pending->height, cmdq_pkt);
> > +
> > +       rdma_config.source_width = pending->pitch / fmt_info-
> > >cpp[0];
> > +       rdma_config.csc_enable = fmt_info->is_yuv ? true : false;
> > +       rdma_config.profile = RDMA_CSC_FULL709_TO_RGB;
> > +       rdma_config.width = merge_cfg.in_w[0];
> > +       rdma_config.height = pending->height;
> > +       rdma_config.addr0 = pending->addr;
> > +       rdma_config.pitch = pending->pitch;
> > +       rdma_config.fmt = pending->format;
> > +       mtk_mdp_rdma_config(rdma_l->regs, &rdma_config, cmdq_pkt,
> > &rdma_l->cmdq_base);
> > +
> > +       rdma_config.x_left = merge_cfg.in_w[0];
> > +       rdma_config.width = merge_cfg.in_w[1];
> > +       mtk_mdp_rdma_config(rdma_r->regs, &rdma_config, cmdq_pkt,
> > &rdma_r->cmdq_base);
> > +
> > +       mtk_ddp_write_mask(cmdq_pkt, 0x1, &merge->cmdq_base, merge-
> > >regs,
> > +                          DISP_MERGE_ENABLE, MERGE_ENABLE);
> > +       mtk_ddp_write_mask(cmdq_pkt, 0x0, &merge->cmdq_base, merge-
> > >regs,
> > +                          DISP_MERGE_MUTE_0, 0x1);
> 
> Move this to merge driver.
OK.
> 
> > +
> > +       mtk_mdp_rdma_start(rdma_l->regs, cmdq_pkt, &rdma_l-
> > >cmdq_base);
> > +       if (use_dual_pipe)
> > +               mtk_mdp_rdma_start(rdma_r->regs, cmdq_pkt, &rdma_r-
> > >cmdq_base);
> > +       else
> > +               mtk_mdp_rdma_stop(rdma_r->regs, cmdq_pkt, &rdma_r-
> > >cmdq_base);
> > +}
> > +
> > +void mtk_ovl_adaptor_stop(struct device *dev)
> > +{
> > +       struct mtk_disp_ovl_adaptor *ovl_adaptor =
> > dev_get_drvdata(dev);
> > +       struct mtk_ovl_adaptor_comp *rdma_l;
> > +       struct mtk_ovl_adaptor_comp *rdma_r;
> > +       struct mtk_ovl_adaptor_comp *merge;
> > +       unsigned int reg;
> > +       u32 i;
> > +
> > +       for (i = 0; i < MTK_OVL_ADAPTOR_LAYER_NUM; i++) {
> > +               rdma_l = &ovl_adaptor-
> > >ovl_adaptor_comp[OVL_ADAPTOR_MDP_RDMA0 + 2 * i];
> > +               rdma_r = &ovl_adaptor-
> > >ovl_adaptor_comp[OVL_ADAPTOR_MDP_RDMA0 + 2 * i + 1];
> > +               merge = &ovl_adaptor-
> > >ovl_adaptor_comp[OVL_ADAPTOR_MERGE0 + i];
> > +
> > +               mtk_mdp_rdma_stop(rdma_l->regs, NULL, &rdma_l-
> > >cmdq_base);
> > +               mtk_mdp_rdma_stop(rdma_r->regs, NULL, &rdma_r-
> > >cmdq_base);
> > +
> > +               reg = readl(merge->regs + DISP_MERGE_ENABLE);
> > +               reg = reg & ~MERGE_ENABLE;
> > +               writel_relaxed(reg, merge->regs +
> > DISP_MERGE_ENABLE);
> 
> Ditto.
OK.
> 
> > +
> > +               device_reset_optional(merge->dev);
> > +       }
> > +}
> > +
> > +int mtk_ovl_adaptor_clk_enable(struct device *dev)
> > +{
> > +       struct mtk_disp_ovl_adaptor *ovl_adaptor =
> > dev_get_drvdata(dev);
> > +       struct mtk_ovl_adaptor_comp *comp;
> > +       int ret;
> > +       int i;
> > +       int j;
> > +
> > +       for (i = OVL_ADAPTOR_MDP_RDMA0; i < OVL_ADAPTOR_ID_MAX;
> > i++) {
> > +               comp = &ovl_adaptor->ovl_adaptor_comp[i];
> > +               if (!comp->dev)
> > +                       continue;
> > +
> > +               /* Need to power on for private rdma devices */
> > +               if (i < OVL_ADAPTOR_MERGE0) {
> > +                       ret = pm_runtime_get_sync(comp->dev);
> > +                       if (ret < 0)
> > +                               dev_err(dev,
> > +                                       "Failed to power on, err
> > %d-%s\n",
> > +                                       ret,
> > ovl_adaptor_comp_str[i]);
> 
> undo previos pm_runtime_get_sync() and return error.

OK, I will add error handling.
> 
> > +               }
> > +
> > +               for (j = 0; j < ARRAY_SIZE(comp->clks); j++) {
> > +                       if (IS_ERR(comp->clks[j]))
> > +                               break;
> > +
> > +                       ret = clk_prepare_enable(comp->clks[j]);
> > +                       if (ret)
> > +                               dev_err(dev,
> > +                                       "Failed to enable clock %d,
> > err %d-%s\n",
> > +                                       i, ret,
> > ovl_adaptor_comp_str[i]);
> 
> undo and previous job and return error.

OK, I will add error handling.
> 
> > +               }
> > +       }
> > +
> > +       return ret;
> > +}
> > +
> > +void mtk_ovl_adaptor_clk_disable(struct device *dev)
> > +{
> > +       struct mtk_disp_ovl_adaptor *ovl_adaptor =
> > dev_get_drvdata(dev);
> > +       struct mtk_ovl_adaptor_comp *comp;
> > +       int ret;
> > +       int i;
> > +       int j;
> > +
> > +       for (i = OVL_ADAPTOR_MDP_RDMA0; i < OVL_ADAPTOR_ID_MAX;
> > i++) {
> > +               comp = &ovl_adaptor->ovl_adaptor_comp[i];
> > +               if (!comp->dev)
> > +                       continue;
> > +
> > +               for (j = 0; i < ARRAY_SIZE(comp->clks); j++) {
> > +                       if (IS_ERR(comp->clks[j]))
> > +                               break;
> > +                       clk_disable_unprepare(comp->clks[j]);
> > +               }
> > +
> > +               /* Need to power off for private rdma devices */
> > +               if (i < OVL_ADAPTOR_MERGE0) {
> > +                       ret = pm_runtime_put(comp->dev);
> > +                       if (ret < 0)
> > +                               dev_err(dev,
> > +                                       "Failed to power off, err-
> > %s\n",
> > +                                       ret,
> > ovl_adaptor_comp_str[i]);
> > +               }
> > +       }
> > +}
> > +
> > +static int ovl_adaptor_comp_get_id(struct device *dev, struct
> > device_node *node,
> > +                                  enum mtk_ovl_adaptor_comp_type
> > type)
> > +{
> > +       int alias_id = of_alias_get_id(node,
> > private_comp_stem[type]);
> > +       int ret;
> > +       int i;
> > +
> > +       for (i = 0; i < ARRAY_SIZE(comp_matches); i++)
> > +               if (comp_matches[i].type == type &&
> > +                   comp_matches[i].alias_id == alias_id)
> > +                       return i;
> > +
> > +       dev_err(dev, "Failed to get id. type: %d, alias: %d\n",
> > type, alias_id);
> > +       return -EINVAL;
> > +}
> > +
> > +static int private_comp_init(struct device *dev, struct
> > device_node *node,
> > +                            struct mtk_ovl_adaptor_comp *comp,
> > +                            enum mtk_ovl_adaptor_comp_id id)
> > +{
> > +       struct platform_device *comp_pdev;
> > +       int ret;
> > +       int i;
> > +
> > +       if (id < 0 || id >= OVL_ADAPTOR_ID_MAX) {
> > +               dev_err(dev, "Invalid component id %d\n", id);
> > +               return -EINVAL;
> > +       }
> > +
> > +       comp_pdev = of_find_device_by_node(node);
> > +       if (!comp_pdev) {
> > +               dev_warn(dev, "can't find platform device of
> > node:%s\n",
> > +                        node->name);
> > +               return -ENODEV;
> > +       }
> > +       comp->dev = &comp_pdev->dev;
> > +       comp->regs = of_iomap(node, 0);
> > +
> > +       for (i = 0; i < ARRAY_SIZE(comp->clks); i++) {
> > +               comp->clks[i] = of_clk_get(node, i);
> > +               if (IS_ERR(comp->clks[i]))
> > +                       break;
> > +       }
> > +
> > +#if IS_REACHABLE(CONFIG_MTK_CMDQ)
> > +       ret = cmdq_dev_get_client_reg(comp->dev, &comp->cmdq_base,
> > 0);
> > +       if (ret)
> > +               dev_info(dev, "get mediatek,gce-client-reg
> > fail!\n");
> > +#endif
> > +
> > +       if (id < OVL_ADAPTOR_MERGE0)
> > +               pm_runtime_enable(comp->dev);
> > +
> > +       dev_info(dev, "[DRM]regs:0x%p, node:%s\n", comp->regs,
> > ovl_adaptor_comp_str[id]);
> > +
> > +       return 0;
> > +}
> > +
> > +static int mtk_disp_ovl_adaptor_comp_probe(struct platform_device
> > *pdev)
> > +{
> > +       return 0;
> > +}
> > +
> > +static int mtk_disp_ovl_adaptor_comp_remove(struct platform_device
> > *pdev)
> > +{
> > +       return 0;
> > +}
> > +
> > +static const struct of_device_id mtk_ovl_adaptor_comp_dt_ids[] = {
> > +       {
> > +               .compatible = "mediatek,mt8195-vdo1-rdma",
> > +               .data = (void *)OVL_ADAPTOR_TYPE_RDMA,
> > +       }, {
> > +               .compatible = "mediatek,mt8195-vdo1-merge",
> > +               .data = (void *)OVL_ADAPTOR_TYPE_MERGE,
> > +       },
> > +       {},
> > +};
> > +
> > +static struct platform_driver mtk_disp_ovl_adaptor_comp_driver = {
> > +       .probe          = mtk_disp_ovl_adaptor_comp_probe,
> > +       .remove         = mtk_disp_ovl_adaptor_comp_remove,
> > +       .driver = {
> > +               .name   = "mediatek-disp-ovl-adaptor-comp",
> > +               .owner  = THIS_MODULE,
> > +               .of_match_table = mtk_ovl_adaptor_comp_dt_ids,
> > +       },
> > +};
> > +module_platform_driver(mtk_disp_ovl_adaptor_comp_driver);
> > +
> > +static int ovl_adaptor_comp_init(struct device *dev)
> > +{
> > +       struct mtk_disp_ovl_adaptor *priv = dev_get_drvdata(dev);
> > +       struct device_node *node, *parent;
> > +       int i, ret;
> > +
> > +       parent = dev->parent->of_node->parent;
> > +
> > +       for_each_child_of_node(parent, node) {
> > +               const struct of_device_id *of_id;
> > +               enum mtk_ovl_adaptor_comp_type type;
> > +               struct mtk_ovl_adaptor_comp *comp;
> > +               int id;
> > +
> > +               of_id = of_match_node(mtk_ovl_adaptor_comp_dt_ids,
> > node);
> > +               if (!of_id)
> > +                       continue;
> > +
> > +               if (!of_device_is_available(node)) {
> > +                       dev_info(dev, "Skipping disabled component
> > %pOF\n",
> > +                                node);
> > +                       continue;
> > +               }
> > +
> > +               type = (enum mtk_ovl_adaptor_comp_type)of_id->data;
> > +               id = ovl_adaptor_comp_get_id(dev, node, type);
> > +               if (id < 0) {
> > +                       dev_warn(dev, "Skipping unknown component
> > %pOF\n",
> > +                                node);
> > +                       continue;
> > +               }
> > +
> > +               ret = private_comp_init(dev, node, &priv-
> > >ovl_adaptor_comp[id], id);
> > +               if (ret)
> > +                       return ret;
> > +       }
> > +
> > +       return 0;
> > +}
> > +
> > +static const struct of_device_id ovl_adaptor_driver_dt_match[] = {
> > +       { .compatible = "mediatek,mt8195-disp-ethdr"},
> > +       {},
> > +};
> > +MODULE_DEVICE_TABLE(of, mtk_disp_ovl_adaptor_driver_dt_match);
> > +
> > +static int mtk_disp_ovl_adaptor_probe(struct platform_device
> > *pdev)
> > +{
> > +       struct mtk_disp_ovl_adaptor *priv;
> > +       struct device *dev = &pdev->dev;
> > +       struct device_node *phandle = dev->parent->of_node;
> > +       const struct of_device_id *of_id;
> > +       int ret;
> > +       int i;
> > +
> > +       dev_info(dev, "%s+\n", __func__);
> > +
> > +       of_id = of_match_node(ovl_adaptor_driver_dt_match,
> > phandle);
> > +       if (!of_id)
> > +               return -ENODEV;
> > +
> > +       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> > +       if (!priv)
> > +               return -ENOMEM;
> > +
> > +       priv->mmsys_dev = pdev->dev.platform_data;
> > +
> > +       platform_set_drvdata(pdev, priv);
> > +
> > +       ret = ovl_adaptor_comp_init(dev);
> > +       if (ret) {
> > +               dev_notice(dev, "ovl_adaptor comp init fail\n");
> > +               return ret;
> > +       }
> > +
> > +       dev_info(dev, "%s-\n", __func__);
> > +       return ret;
> > +}
> > +
> > +static int mtk_disp_ovl_adaptor_remove(struct platform_device
> > *pdev)
> > +{
> > +       struct mtk_disp_ovl_adaptor *ovl_adaptor =
> > dev_get_drvdata(&pdev->dev);
> > +       int i;
> > +
> > +       for (i = OVL_ADAPTOR_MDP_RDMA0; i < OVL_ADAPTOR_MERGE0;
> > i++)
> > +               pm_runtime_disable(ovl_adaptor-
> > >ovl_adaptor_comp[i].dev);
> > +
> > +       return 0;
> > +}
> > +
> > +struct platform_driver mtk_disp_ovl_adaptor_driver = {
> > +       .probe = mtk_disp_ovl_adaptor_probe,
> > +       .remove = mtk_disp_ovl_adaptor_remove,
> > +       .driver = {
> > +                       .name = "mediatek-disp-ovl-adaptor",
> > +                       .owner = THIS_MODULE,
> > +               },
> > +};
> > +module_platform_driver(mtk_disp_ovl_adaptor_driver);
> > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.h
> > b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.h
> > new file mode 100644
> > index 000000000000..7d757be1f491
> > --- /dev/null
> > +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.h
> > @@ -0,0 +1,19 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright (c) 2021 MediaTek Inc.
> > + */
> > +
> > +#ifndef __MTK_DISP_OVL_ADAPTOR_H__
> > +#define __MTK_DISP_OVL_ADAPTOR_H__
> > +
> > +#include <drm/mediatek_drm.h>
> > +
> > +void mtk_ovl_adaptor_stop(struct device *dev);
> > +int mtk_ovl_adaptor_clk_enable(struct device *dev);
> > +void mtk_ovl_adaptor_clk_disable(struct device *dev);
> > +void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int
> > idx,
> > +                                 struct mtk_plane_state *state,
> > +                                 struct cmdq_pkt *cmdq_pkt);
> > +
> > +#endif
> > +
> > --
> > 2.18.0
> > 




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux