The return value of sp_tx_rst_aux() is not propagated, which means
both compiler warnings and potential errors not being handled.
Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP")
Reported-by: kernel test robot <lkp@xxxxxxxxx>
Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
---
Changes since v1:
- Instead of discarding the error, propagate it until it
is handled properly
drivers/gpu/drm/bridge/analogix/anx7625.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 14d73fb1dd15b..ea414cd349b5c 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -720,7 +720,7 @@ static int edid_read(struct anx7625_data *ctx,
ret = sp_tx_aux_rd(ctx, 0xf1);
if (ret) {
- sp_tx_rst_aux(ctx);
+ ret = sp_tx_rst_aux(ctx);
DRM_DEV_DEBUG_DRIVER(dev, "edid read fail, reset!\n");
} else {
ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client,
@@ -735,7 +735,7 @@ static int edid_read(struct anx7625_data *ctx,
if (cnt > EDID_TRY_CNT)
return -EIO;
- return 0;
+ return ret;
}
static int segments_edid_read(struct anx7625_data *ctx,
@@ -785,7 +785,7 @@ static int segments_edid_read(struct anx7625_data *ctx,
if (cnt > EDID_TRY_CNT)
return -EIO;
- return 0;
+ return ret;
}
static int sp_tx_edid_read(struct anx7625_data *ctx,
@@ -887,7 +887,11 @@ static int sp_tx_edid_read(struct anx7625_data *ctx,
}
/* Reset aux channel */
- sp_tx_rst_aux(ctx);
+ ret = sp_tx_rst_aux(ctx);
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "Failed to reset aux channel!\n");
+ return ret;
+ }
return (blocks_num + 1);
}
--
2.30.2
