[PATCH 26/36] drm: xlnx: zynqmp_dpsub: Move DP bridge init to zynqmp_dp_probe()

[Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>]

There's no need to delay bridge initialization, move it to
zynqmp_dp_probe() and drop the zynqmp_dp_drm_init() function.

Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/xlnx/zynqmp_dp.c  | 30 ++++++++++++------------------
 drivers/gpu/drm/xlnx/zynqmp_dp.h  |  1 -
 drivers/gpu/drm/xlnx/zynqmp_kms.c |  6 +-----
 3 files changed, 13 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c b/drivers/gpu/drm/xlnx/zynqmp_dp.c
index e40ddfd27ff0..360175b8fc1f 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_dp.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c
@@ -1609,27 +1609,10 @@ static irqreturn_t zynqmp_dp_irq_handler(int irq, void *data)
  * Initialization & Cleanup
  */
 
-int zynqmp_dp_drm_init(struct zynqmp_dpsub *dpsub)
-{
-	struct zynqmp_dp *dp = dpsub->dp;
-	struct drm_bridge *bridge = &dp->bridge;
-
-	dp->config.misc0 &= ~ZYNQMP_DP_MAIN_STREAM_MISC0_SYNC_LOCK;
-	zynqmp_dp_set_format(dp, NULL, ZYNQMP_DPSUB_FORMAT_RGB, 8);
-
-	/* Initialize the bridge. */
-	bridge->funcs = &zynqmp_dp_bridge_funcs;
-	bridge->ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID
-		    | DRM_BRIDGE_OP_HPD;
-	bridge->type = DRM_MODE_CONNECTOR_DisplayPort;
-	dpsub->bridge = bridge;
-
-	return 0;
-}
-
 int zynqmp_dp_probe(struct zynqmp_dpsub *dpsub, struct drm_device *drm)
 {
 	struct platform_device *pdev = to_platform_device(dpsub->dev);
+	struct drm_bridge *bridge;
 	struct zynqmp_dp *dp;
 	struct resource *res;
 	int ret;
@@ -1672,6 +1655,14 @@ int zynqmp_dp_probe(struct zynqmp_dpsub *dpsub, struct drm_device *drm)
 	if (ret)
 		goto err_reset;
 
+	/* Initialize the bridge. */
+	bridge = &dp->bridge;
+	bridge->funcs = &zynqmp_dp_bridge_funcs;
+	bridge->ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID
+		    | DRM_BRIDGE_OP_HPD;
+	bridge->type = DRM_MODE_CONNECTOR_DisplayPort;
+	dpsub->bridge = bridge;
+
 	/*
 	 * Acquire the next bridge in the chain. Ignore errors caused by port@5
 	 * not being connected for backward-compatibility with older DTs.
@@ -1682,6 +1673,9 @@ int zynqmp_dp_probe(struct zynqmp_dpsub *dpsub, struct drm_device *drm)
 		goto err_reset;
 
 	/* Initialize the hardware. */
+	dp->config.misc0 &= ~ZYNQMP_DP_MAIN_STREAM_MISC0_SYNC_LOCK;
+	zynqmp_dp_set_format(dp, NULL, ZYNQMP_DPSUB_FORMAT_RGB, 8);
+
 	zynqmp_dp_write(dp, ZYNQMP_DP_TX_PHY_POWER_DOWN,
 			ZYNQMP_DP_TX_PHY_POWER_DOWN_ALL);
 	zynqmp_dp_set(dp, ZYNQMP_DP_PHY_RESET, ZYNQMP_DP_PHY_RESET_ALL_RESET);
diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.h b/drivers/gpu/drm/xlnx/zynqmp_dp.h
index 4507740093f6..736d810fa16f 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_dp.h
+++ b/drivers/gpu/drm/xlnx/zynqmp_dp.h
@@ -20,7 +20,6 @@ struct zynqmp_dpsub;
 void zynqmp_dp_enable_vblank(struct zynqmp_dp *dp);
 void zynqmp_dp_disable_vblank(struct zynqmp_dp *dp);
 
-int zynqmp_dp_drm_init(struct zynqmp_dpsub *dpsub);
 int zynqmp_dp_probe(struct zynqmp_dpsub *dpsub, struct drm_device *drm);
 void zynqmp_dp_remove(struct zynqmp_dpsub *dpsub);
 
diff --git a/drivers/gpu/drm/xlnx/zynqmp_kms.c b/drivers/gpu/drm/xlnx/zynqmp_kms.c
index 54358f1f51e5..51903bc1de2b 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_kms.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_kms.c
@@ -347,7 +347,7 @@ int zynqmp_dpsub_kms_init(struct zynqmp_dpsub *dpsub)
 	struct drm_connector *connector;
 	int ret;
 
-	/* Create the planes and the CRTC, and nitialize the DP encoder. */
+	/* Create the planes and the CRTC. */
 	ret = zynqmp_dpsub_create_planes(dpsub);
 	if (ret)
 		return ret;
@@ -358,10 +358,6 @@ int zynqmp_dpsub_kms_init(struct zynqmp_dpsub *dpsub)
 
 	zynqmp_dpsub_map_crtc_to_plane(dpsub);
 
-	ret = zynqmp_dp_drm_init(dpsub);
-	if (ret)
-		return ret;
-
 	/* Create the encoder and attach the bridge. */
 	encoder->possible_crtcs |= drm_crtc_mask(&dpsub->crtc);
 	drm_simple_encoder_init(&dpsub->drm, encoder, DRM_MODE_ENCODER_NONE);
-- 
Regards,

Laurent Pinchart