Re: [PATCH v1 1/1] drm/bridge: anx7625: Tune K value for IVO panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hey Xin,

Thanks for submitting this.

On Thu, 5 Aug 2021 at 09:31, Xin Ji <xji@xxxxxxxxxxxxxxxx> wrote:
>
> IVO panel require less input video clock variation than video clock
> variation in DP CTS spec.
>
> This patch decreases the K value of ANX7625 which will shrink eDP Tx
> video clock variation to meet IVO panel's requirement.
>
> Signed-off-by: Xin Ji <xji@xxxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/bridge/analogix/anx7625.c | 17 ++++++++++++++---
>  drivers/gpu/drm/bridge/analogix/anx7625.h |  4 +++-
>  2 files changed, 17 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> index a3d82377066b..ceed1c7f3f28 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> @@ -384,6 +384,18 @@ static int anx7625_odfc_config(struct anx7625_data *ctx,
>         return ret;
>  }
>
> +static int anx7625_set_k_value(struct anx7625_data *ctx)

Pardon my ignorance, but I don't know what a K-value is. Could you add
a comment detailing
what the K-value does?

> +{
> +       struct edid *edid = (struct edid *)ctx->slimport_edid_p.edid_raw_data;
> +
> +       if (edid->mfg_id[0] == IVO_MID0 && edid->mfg_id[1] == IVO_MID1)
> +               return anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> +                                        MIPI_DIGITAL_ADJ_1, 0x3B);
> +
> +       return anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> +                                MIPI_DIGITAL_ADJ_1, 0x3D);
> +}
> +
>  static int anx7625_dsi_video_timing_config(struct anx7625_data *ctx)
>  {
>         struct device *dev = &ctx->client->dev;
> @@ -470,9 +482,8 @@ static int anx7625_dsi_video_timing_config(struct anx7625_data *ctx)
>                         MIPI_PLL_N_NUM_15_8, (n >> 8) & 0xff);
>         ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, MIPI_PLL_N_NUM_7_0,
>                         (n & 0xff));
> -       /* Diff */
> -       ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client,
> -                       MIPI_DIGITAL_ADJ_1, 0x3D);
> +       /* Diff and K value */

With a proper comment above, this comment is no longer needed.

> +       anx7625_set_k_value(ctx);
>
>         ret |= anx7625_odfc_config(ctx, post_divider - 1);
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
> index 034c3840028f..6dcf64c703f9 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.h
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
> @@ -210,7 +210,9 @@
>  #define  MIPI_VIDEO_STABLE_CNT           0x0A
>
>  #define  MIPI_LANE_CTRL_10               0x0F
> -#define  MIPI_DIGITAL_ADJ_1   0x1B
> +#define  MIPI_DIGITAL_ADJ_1     0x1B
> +#define  IVO_MID0               0x26
> +#define  IVO_MID1               0xCF
>
>  #define  MIPI_PLL_M_NUM_23_16   0x1E
>  #define  MIPI_PLL_M_NUM_15_8    0x1F
> --
> 2.25.1
>

LGTM with the above fix.

Reviewed-by: Robert Foss <robert.foss@xxxxxxxxxx>



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux