Hi Shawn,
see a few comments in the following.
Sam
On Wed, Aug 04, 2021 at 04:13:52PM +0800, Shawn Guo wrote:
> It adds a drm driver for Truly NT35521 5.24" 1280x720 DSI panel, which
> can be found on Sony Xperia M4 Aqua phone. The panel backlight is
> managed through DSI link.
>
> Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
> ---
> drivers/gpu/drm/panel/Kconfig | 9 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-truly-nt35521.c | 491 ++++++++++++++++++++
> 3 files changed, 501 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-truly-nt35521.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index ef87d92cdf49..cdc4abd5c40c 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -537,6 +537,15 @@ config DRM_PANEL_TPO_TPG110
> 400CH LTPS TFT LCD Single Chip Digital Driver for up to
> 800x400 LCD panels.
>
> +config DRM_PANEL_TRULY_NT35521
> + tristate "Truly NT35521 panel"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y here if you want to enable support for Truly NT35521
> + 1280x720 DSI panel.
Here you could mention that the first use is the Sone eXperia M4 Aqua to
help the user.
> +
> config DRM_PANEL_TRULY_NT35597_WQXGA
> tristate "Truly WQXGA"
> depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index cae4d976c069..3d3c98cb7a7b 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -56,6 +56,7 @@ obj-$(CONFIG_DRM_PANEL_TDO_TL070WSH30) += panel-tdo-tl070wsh30.o
> obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
> obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
> obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
> +obj-$(CONFIG_DRM_PANEL_TRULY_NT35521) += panel-truly-nt35521.o
> obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
> obj-$(CONFIG_DRM_PANEL_VISIONOX_RM69299) += panel-visionox-rm69299.o
> obj-$(CONFIG_DRM_PANEL_XINPENG_XPP055C272) += panel-xinpeng-xpp055c272.o
> diff --git a/drivers/gpu/drm/panel/panel-truly-nt35521.c b/drivers/gpu/drm/panel/panel-truly-nt35521.c
> new file mode 100644
> index 000000000000..ea3cfb46be7e
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-truly-nt35521.c
> @@ -0,0 +1,491 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2021, Linaro Limited
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_print.h>
drm_print is not used by panel drivers - this also imply that you need
to replace all uses of DRM_ERROR and friends.
> +
> +struct nt35521_panel {
> + struct drm_panel panel;
> + struct device *dev;
> + struct gpio_desc *rst_gpio;
> + struct gpio_desc *pwrp5_gpio;
> + struct gpio_desc *pwrn5_gpio;
> + struct gpio_desc *en_gpio;
> + bool prepared;
> + bool enabled;
> +};
> +
> +static inline struct nt35521_panel *panel_to_nt35521(struct drm_panel *panel)
> +{
> + return container_of(panel, struct nt35521_panel, panel);
> +}
> +
> +#define nt_dcs_write(seq...) \
> +({ \
> + const u8 d[] = { seq }; \
> + if (mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)) < 0) \
> + DRM_DEV_ERROR(dev, "dcs write buffer failed\n"); \
> +})
So in case of an error the code just continues with the next write, that
likely also errors out.
Please see what is for example implemented in panel-elida-kd35t133.c
That pattern looks much saner.
> +
> +#define nt_gen_write(seq...) \
> +({ \
> + const u8 d[] = { seq }; \
> + if (mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d)) < 0) \
> + DRM_DEV_ERROR(dev, "generic write buffer failed\n"); \
> +})
For the two uses, please consider open coding this.
> +
> +static void nt35521_panel_on(struct nt35521_panel *nt)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev);
> + struct device *dev = nt->dev;
> +
> + /* Transmit data in low power mode */
> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> + nt_dcs_write(0xf0, 0x55, 0xaa, 0x52, 0x08, 0x00);
> + nt_dcs_write(0xff, 0xaa, 0x55, 0xa5, 0x80);
> + nt_dcs_write(0x6f, 0x11, 0x00);
> + nt_dcs_write(0xf7, 0x20, 0x00);
> + nt_dcs_write(0x6f, 0x01);
> + nt_dcs_write(0xb1, 0x21);
> + nt_dcs_write(0xbd, 0x01, 0xa0, 0x10, 0x08, 0x01);
> + nt_dcs_write(0xb8, 0x01, 0x02, 0x0c, 0x02);
> + nt_dcs_write(0xbb, 0x11, 0x11);
> + nt_dcs_write(0xbc, 0x00, 0x00);
> + nt_dcs_write(0xb6, 0x02);
> + nt_dcs_write(0xf0, 0x55, 0xaa, 0x52, 0x08, 0x01);
> + nt_dcs_write(0xb0, 0x09, 0x09);
> + nt_dcs_write(0xb1, 0x09, 0x09);
> + nt_dcs_write(0xbc, 0x8c, 0x00);
> + nt_dcs_write(0xbd, 0x8c, 0x00);
> + nt_dcs_write(0xca, 0x00);
> + nt_dcs_write(0xc0, 0x04);
> + nt_dcs_write(0xbe, 0xb5);
> + nt_dcs_write(0xb3, 0x35, 0x35);
> + nt_dcs_write(0xb4, 0x25, 0x25);
> + nt_dcs_write(0xb9, 0x43, 0x43);
> + nt_dcs_write(0xba, 0x24, 0x24);
> + nt_dcs_write(0xf0, 0x55, 0xaa, 0x52, 0x08, 0x02);
> + nt_dcs_write(0xee, 0x03);
> + nt_dcs_write(0xb0, 0x00, 0xb2, 0x00, 0xb3, 0x00, 0xb6, 0x00,
> + 0xc3, 0x00, 0xce, 0x00, 0xe1, 0x00, 0xf3, 0x01,
> + 0x11);
> + nt_dcs_write(0xb1, 0x01, 0x2e, 0x01, 0x5c, 0x01, 0x82, 0x01,
> + 0xc3, 0x01, 0xfe, 0x02, 0x00, 0x02, 0x37, 0x02,
> + 0x77);
> + nt_dcs_write(0xb2, 0x02, 0xa1, 0x02, 0xd7, 0x02, 0xfe, 0x03,
> + 0x2c, 0x03, 0x4b, 0x03, 0x63, 0x03, 0x8f, 0x03,
> + 0x90);
> + nt_dcs_write(0xb3, 0x03, 0x96, 0x03, 0x98);
> + nt_dcs_write(0xb4, 0x00, 0x81, 0x00, 0x8b, 0x00, 0x9c, 0x00,
> + 0xa9, 0x00, 0xb5, 0x00, 0xcb, 0x00, 0xdf, 0x01,
> + 0x02);
> + nt_dcs_write(0xb5, 0x01, 0x1f, 0x01, 0x51, 0x01, 0x7a, 0x01,
> + 0xbf, 0x01, 0xfa, 0x01, 0xfc, 0x02, 0x34, 0x02, 0x76);
> + nt_dcs_write(0xb6, 0x02, 0x9f, 0x02, 0xd7, 0x02, 0xfc, 0x03, 0x2c,
> + 0x03, 0x4a, 0x03, 0x63, 0x03, 0x8f, 0x03, 0xa2);
> + nt_dcs_write(0xb7, 0x03, 0xb8, 0x03, 0xba);
> + nt_dcs_write(0xb8, 0x00, 0x01, 0x00, 0x02, 0x00, 0x0e, 0x00, 0x2a,
> + 0x00, 0x41, 0x00, 0x67, 0x00, 0x87, 0x00, 0xb9);
> + nt_dcs_write(0xb9, 0x00, 0xe2, 0x01, 0x22, 0x01, 0x54, 0x01, 0xa3,
> + 0x01, 0xe6, 0x01, 0xe7, 0x02, 0x24, 0x02, 0x67);
> + nt_dcs_write(0xba, 0x02, 0x93, 0x02, 0xcd, 0x02, 0xf6, 0x03, 0x31,
> + 0x03, 0x6c, 0x03, 0xe9, 0x03, 0xef, 0x03, 0xf4);
> + nt_dcs_write(0xbb, 0x03, 0xf6, 0x03, 0xf7);
> + nt_dcs_write(0xf0, 0x55, 0xaa, 0x52, 0x08, 0x03);
> + nt_dcs_write(0xb0, 0x22, 0x00);
> + nt_dcs_write(0xb1, 0x22, 0x00);
> + nt_dcs_write(0xb2, 0x05, 0x00, 0x60, 0x00, 0x00);
> + nt_dcs_write(0xb3, 0x05, 0x00, 0x60, 0x00, 0x00);
> + nt_dcs_write(0xb4, 0x05, 0x00, 0x60, 0x00, 0x00);
> + nt_dcs_write(0xb5, 0x05, 0x00, 0x60, 0x00, 0x00);
> + nt_dcs_write(0xba, 0x53, 0x00, 0x60, 0x00, 0x00);
> + nt_dcs_write(0xbb, 0x53, 0x00, 0x60, 0x00, 0x00);
> + nt_dcs_write(0xbc, 0x53, 0x00, 0x60, 0x00, 0x00);
> + nt_dcs_write(0xbd, 0x53, 0x00, 0x60, 0x00, 0x00);
> + nt_dcs_write(0xc0, 0x00, 0x34, 0x00, 0x00);
> + nt_dcs_write(0xc1, 0x00, 0x00, 0x34, 0x00);
> + nt_dcs_write(0xc2, 0x00, 0x00, 0x34, 0x00);
> + nt_dcs_write(0xc3, 0x00, 0x00, 0x34, 0x00);
> + nt_dcs_write(0xc4, 0x60);
> + nt_dcs_write(0xc5, 0xc0);
> + nt_dcs_write(0xc6, 0x00);
> + nt_dcs_write(0xc7, 0x00);
> + nt_dcs_write(0xf0, 0x55, 0xaa, 0x52, 0x08, 0x05);
> + nt_dcs_write(0xb0, 0x17, 0x06);
> + nt_dcs_write(0xb1, 0x17, 0x06);
> + nt_dcs_write(0xb2, 0x17, 0x06);
> + nt_dcs_write(0xb3, 0x17, 0x06);
> + nt_dcs_write(0xb4, 0x17, 0x06);
> + nt_dcs_write(0xb5, 0x17, 0x06);
> + nt_dcs_write(0xb6, 0x17, 0x06);
> + nt_dcs_write(0xb7, 0x17, 0x06);
> + nt_dcs_write(0xb8, 0x00);
> + nt_dcs_write(0xb9, 0x00, 0x03);
> + nt_dcs_write(0xba, 0x00, 0x00);
> + nt_dcs_write(0xbb, 0x02, 0x03);
> + nt_dcs_write(0xbc, 0x02, 0x03);
> + nt_dcs_write(0xbd, 0x03, 0x03, 0x00, 0x03, 0x03);
> + nt_dcs_write(0xc0, 0x0b);
> + nt_dcs_write(0xc1, 0x09);
> + nt_dcs_write(0xc2, 0xa6);
> + nt_dcs_write(0xc3, 0x05);
> + nt_dcs_write(0xc4, 0x00);
> + nt_dcs_write(0xc5, 0x02);
> + nt_dcs_write(0xc6, 0x22);
> + nt_dcs_write(0xc7, 0x03);
> + nt_dcs_write(0xc8, 0x07, 0x20);
> + nt_dcs_write(0xc9, 0x03, 0x20);
> + nt_dcs_write(0xca, 0x01, 0x60);
> + nt_dcs_write(0xcb, 0x01, 0x60);
> + nt_dcs_write(0xcc, 0x00, 0x00, 0x02);
> + nt_dcs_write(0xcd, 0x00, 0x00, 0x02);
> + nt_dcs_write(0xce, 0x00, 0x00, 0x02);
> + nt_dcs_write(0xcf, 0x00, 0x00, 0x02);
> + nt_dcs_write(0xd1, 0x00, 0x05, 0x01, 0x07, 0x10);
> + nt_dcs_write(0xd2, 0x10, 0x05, 0x05, 0x03, 0x10);
> + nt_dcs_write(0xd3, 0x20, 0x00, 0x43, 0x07, 0x10);
> + nt_dcs_write(0xd4, 0x30, 0x00, 0x43, 0x07, 0x10);
> + nt_dcs_write(0xd0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
> + nt_dcs_write(0xd5, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00);
> + nt_dcs_write(0xd6, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00);
> + nt_dcs_write(0xd7, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00);
> + nt_dcs_write(0xd8, 0x00, 0x00, 0x00, 0x00, 0x00);
> + nt_dcs_write(0xe5, 0x06);
> + nt_dcs_write(0xe6, 0x06);
> + nt_dcs_write(0xe7, 0x00);
> + nt_dcs_write(0xe8, 0x06);
> + nt_dcs_write(0xe9, 0x06);
> + nt_dcs_write(0xea, 0x06);
> + nt_dcs_write(0xeb, 0x00);
> + nt_dcs_write(0xec, 0x00);
> + nt_dcs_write(0xed, 0x30);
> + nt_dcs_write(0xf0, 0x55, 0xaa, 0x52, 0x08, 0x06);
> + nt_dcs_write(0xb0, 0x31, 0x31);
> + nt_dcs_write(0xb1, 0x31, 0x31);
> + nt_dcs_write(0xb2, 0x2d, 0x2e);
> + nt_dcs_write(0xb3, 0x31, 0x34);
> + nt_dcs_write(0xb4, 0x29, 0x2a);
> + nt_dcs_write(0xb5, 0x12, 0x10);
> + nt_dcs_write(0xb6, 0x18, 0x16);
> + nt_dcs_write(0xb7, 0x00, 0x02);
> + nt_dcs_write(0xb8, 0x08, 0x31);
> + nt_dcs_write(0xb9, 0x31, 0x31);
> + nt_dcs_write(0xba, 0x31, 0x31);
> + nt_dcs_write(0xbb, 0x31, 0x08);
> + nt_dcs_write(0xbc, 0x03, 0x01);
> + nt_dcs_write(0xbd, 0x17, 0x19);
> + nt_dcs_write(0xbe, 0x11, 0x13);
> + nt_dcs_write(0xbf, 0x2a, 0x29);
> + nt_dcs_write(0xc0, 0x34, 0x31);
> + nt_dcs_write(0xc1, 0x2e, 0x2d);
> + nt_dcs_write(0xc2, 0x31, 0x31);
> + nt_dcs_write(0xc3, 0x31, 0x31);
> + nt_dcs_write(0xc4, 0x31, 0x31);
> + nt_dcs_write(0xc5, 0x31, 0x31);
> + nt_dcs_write(0xc6, 0x2e, 0x2d);
> + nt_dcs_write(0xc7, 0x31, 0x34);
> + nt_dcs_write(0xc8, 0x29, 0x2a);
> + nt_dcs_write(0xc9, 0x17, 0x19);
> + nt_dcs_write(0xca, 0x11, 0x13);
> + nt_dcs_write(0xcb, 0x03, 0x01);
> + nt_dcs_write(0xcc, 0x08, 0x31);
> + nt_dcs_write(0xcd, 0x31, 0x31);
> + nt_dcs_write(0xce, 0x31, 0x31);
> + nt_dcs_write(0xcf, 0x31, 0x08);
> + nt_dcs_write(0xd0, 0x00, 0x02);
> + nt_dcs_write(0xd1, 0x12, 0x10);
> + nt_dcs_write(0xd2, 0x18, 0x16);
> + nt_dcs_write(0xd3, 0x2a, 0x29);
> + nt_dcs_write(0xd4, 0x34, 0x31);
> + nt_dcs_write(0xd5, 0x2d, 0x2e);
> + nt_dcs_write(0xd6, 0x31, 0x31);
> + nt_dcs_write(0xd7, 0x31, 0x31);
> + nt_dcs_write(0xe5, 0x31, 0x31);
> + nt_dcs_write(0xe6, 0x31, 0x31);
> + nt_dcs_write(0xd8, 0x00, 0x00, 0x00, 0x00, 0x00);
> + nt_dcs_write(0xd9, 0x00, 0x00, 0x00, 0x00, 0x00);
> + nt_dcs_write(0xe7, 0x00);
> + nt_dcs_write(0x6f, 0x02);
> + nt_dcs_write(0xf7, 0x47);
> + nt_dcs_write(0x6f, 0x0a);
> + nt_dcs_write(0xf7, 0x02);
> + nt_dcs_write(0x6f, 0x17);
> + nt_dcs_write(0xf4, 0x60);
> + nt_dcs_write(0x6f, 0x01);
> + nt_dcs_write(0xf9, 0x46);
> + nt_dcs_write(0x6f, 0x11);
> + nt_dcs_write(0xf3, 0x01);
> + nt_dcs_write(0x35, 0x00);
> + nt_dcs_write(0xf0, 0x55, 0xaa, 0x52, 0x08, 0x00);
> + nt_dcs_write(0xd9, 0x02, 0x03, 0x00);
> + nt_dcs_write(0xf0, 0x55, 0xaa, 0x52, 0x00, 0x00);
> + nt_dcs_write(0xf0, 0x55, 0xaa, 0x52, 0x08, 0x00);
> + nt_dcs_write(0xb1, 0x6c, 0x21);
> + nt_dcs_write(0xf0, 0x55, 0xaa, 0x52, 0x00, 0x00);
> + nt_dcs_write(0x35, 0x00);
> + nt_gen_write(0x11, 0x00);
> + msleep(120);
> + nt_gen_write(0x29, 0x00);
> + usleep_range(1000, 1500);
> + nt_dcs_write(0x53, 0x24);
> +}
> +
> +static void nt35521_panel_off(struct nt35521_panel *nt)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev);
> + struct device *dev = nt->dev;
> +
> + /* Transmit data in high speed mode */
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + nt_dcs_write(0x28, 0x00);
This is MIPI_DCS_SET_DISPLAY_OFF
So you can use:
mipi_dsi_dcs_set_display_off()
> + msleep(50);
> + nt_dcs_write(0x10, 0x00);
This is MIPI_DCS_ENTER_SLEEP_MODE
So you can use:
mipi_dsi_dcs_enter_sleep_mode()
> + msleep(150);
Please verify if there are other cases where thestandard helpers can be
used.
> +}
> +
> +static int nt35521_prepare(struct drm_panel *panel)
> +{
> + struct nt35521_panel *nt = panel_to_nt35521(panel);
> +
> + if (nt->prepared)
> + return 0;
> +
> + gpiod_set_value_cansleep(nt->pwrp5_gpio, 1);
> + usleep_range(1000, 1500);
> + gpiod_set_value_cansleep(nt->pwrn5_gpio, 1);
> + usleep_range(10000, 15000);
> + gpiod_set_value_cansleep(nt->rst_gpio, 0);
> + msleep(150);
> +
> + nt35521_panel_on(nt);
> +
> + nt->prepared = true;
> +
> + return 0;
> +}
> +
> +static int nt35521_unprepare(struct drm_panel *panel)
> +{
> + struct nt35521_panel *nt = panel_to_nt35521(panel);
> +
> + if (!nt->prepared)
> + return 0;
> +
> + nt35521_panel_off(nt);
> +
> + gpiod_set_value_cansleep(nt->rst_gpio, 1);
> +
> + nt->prepared = false;
> +
> + return 0;
> +}
> +
> +static int nt35521_enable(struct drm_panel *panel)
> +{
> + struct nt35521_panel *nt = panel_to_nt35521(panel);
> +
> + if (nt->enabled)
> + return 0;
> +
> + gpiod_set_value_cansleep(nt->en_gpio, 1);
> +
> + nt->enabled = true;
> +
> + return 0;
> +}
> +
> +static int nt35521_disable(struct drm_panel *panel)
> +{
> + struct nt35521_panel *nt = panel_to_nt35521(panel);
> +
> + if (!nt->enabled)
> + return 0;
> +
> + gpiod_set_value_cansleep(nt->en_gpio, 0);
> +
> + nt->enabled = false;
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode nt35521_modes = {
> + .clock = 133306,
> + .hdisplay = 720,
> + .hsync_start = 720 + 632,
> + .hsync_end = 720 + 632 + 40,
> + .htotal = 720 + 632 + 40 + 295,
> + .vdisplay = 1280,
> + .vsync_start = 1280 + 18,
> + .vsync_end = 1280 + 18 + 1,
> + .vtotal = 1280 + 18 + 1 + 18,
> +};
> +
> +static int nt35521_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + struct nt35521_panel *nt = panel_to_nt35521(panel);
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(connector->dev, &nt35521_modes);
> + if (!mode) {
> + DRM_DEV_ERROR(nt->dev, "failed to add display mode\n");
> + return -ENOMEM;
> + }
> +
> + drm_mode_set_name(mode);
> + drm_mode_probed_add(connector, mode);
> +
> + connector->display_info.width_mm = 65;
> + connector->display_info.height_mm = 116;
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs nt35521_drm_funcs = {
> + .prepare = nt35521_prepare,
> + .unprepare = nt35521_unprepare,
> + .enable = nt35521_enable,
> + .disable = nt35521_disable,
> + .get_modes = nt35521_get_modes,
> +};
> +
> +static int nt35521_backlight_update_status(struct backlight_device *bd)
> +{
> + struct nt35521_panel *nt = bl_get_data(bd);
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev);
> + u8 brightness = bd->props.brightness;
Use backlight_get_brightness(bd);
> + int ret;
> +
> + ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
> + &brightness,
> + sizeof(brightness));
Use mipi_dsi_dcs_set_display_brightness()
hich btw uses u16 for brightness.
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +static const struct backlight_ops nt35521_backlight_ops = {
> + .update_status = nt35521_backlight_update_status,
> +};
> +
> +static int nt35521_probe(struct mipi_dsi_device *dsi)
> +{
> + struct backlight_properties props;
> + struct device *dev = &dsi->dev;
> + struct nt35521_panel *nt;
> + int ret;
> +
> + nt = devm_kzalloc(dev, sizeof(*nt), GFP_KERNEL);
> + if (!nt)
> + return -ENOMEM;
> +
> + nt->rst_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(nt->rst_gpio)) {
> + ret = PTR_ERR(nt->rst_gpio);
> + DRM_DEV_ERROR(dev, "failed to get reset GPIO: %d\n", ret);
> + return ret;
> + }
In general - use dev_err_probe() all over the probe function.
See for example panel-samsung-sofef00.c
> +
> + nt->pwrp5_gpio = devm_gpiod_get(dev, "pwr-positive5", GPIOD_OUT_LOW);
> + if (IS_ERR(nt->pwrp5_gpio)) {
> + ret = PTR_ERR(nt->pwrp5_gpio);
> + DRM_DEV_ERROR(dev, "failed to get positive5 GPIO: %d\n", ret);
> + return ret;
> + }
> +
> + nt->pwrn5_gpio = devm_gpiod_get(dev, "pwr-negative5", GPIOD_OUT_LOW);
> + if (IS_ERR(nt->pwrn5_gpio)) {
> + ret = PTR_ERR(nt->pwrn5_gpio);
> + DRM_DEV_ERROR(dev, "failed to get negative5 GPIO: %d\n", ret);
> + return ret;
> + }
> +
> + nt->en_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
> + if (IS_ERR(nt->en_gpio)) {
> + ret = PTR_ERR(nt->en_gpio);
> + DRM_DEV_ERROR(dev, "failed to get enable GPIO: %d\n", ret);
> + return ret;
> + }
> +
> + nt->dev = dev;
> +
> + drm_panel_init(&nt->panel, dev, &nt35521_drm_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> +
> + props.max_brightness = 255;
> + props.brightness = 240;
> + props.type = BACKLIGHT_RAW;
Use:
const struct backlight_properties props = {
.type = BACKLIGHT_RAW,
.brightness = 240,
.max_brightness = 255,
};
in the variable declaration.
> +
> + nt->panel.backlight = devm_backlight_device_register(dev, dev_name(dev),
> + dev, nt, &nt35521_backlight_ops,
> + &props);
> + if (IS_ERR(nt->panel.backlight)) {
> + ret = PTR_ERR(nt->panel.backlight);
> + DRM_DEV_ERROR(dev, "failed to register backlight: %d\n", ret);
> + return ret;
> + }
> +
> + drm_panel_add(&nt->panel);
> +
> + dsi->lanes = 4;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> + MIPI_DSI_CLOCK_NON_CONTINUOUS;
> +
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "failed to attach DSI device: %d\n", ret);
> + drm_panel_remove(&nt->panel);
> + return ret;
> + }
> +
> + mipi_dsi_set_drvdata(dsi, nt);
I think it is wise to set drvdata before mipi_dsi_attach.
> +
> + return 0;
> +}
> +
> +static int nt35521_remove(struct mipi_dsi_device *dsi)
> +{
> + struct nt35521_panel *nt = mipi_dsi_get_drvdata(dsi);
> +
> + mipi_dsi_detach(dsi);
> + drm_panel_remove(&nt->panel);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id truly_nt35521_of_match[] = {
> + { .compatible = "truly,nt35521" },
> + { }
Write this as:
{ /* sentinel */ },
just to be consistent with most panels.
> +};
> +MODULE_DEVICE_TABLE(of, truly_nt35521_of_match);
> +
> +static struct mipi_dsi_driver truly_nt35521_driver = {
> + .driver = {
> + .name = "panel-truly-nt35521",
> + .of_match_table = truly_nt35521_of_match,
> + },
> + .probe = nt35521_probe,
> + .remove = nt35521_remove,
> +};
> +module_mipi_dsi_driver(truly_nt35521_driver);
> +
MODULE_AUTHOR()??
> +MODULE_DESCRIPTION("Truly NT35521 DSI panel driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.17.1
