On Fri, Jul 23, 2021 at 05:10:48PM -0700, Lucas De Marchi wrote:
> The only real platform with DISPLAY_VER == 10 is GLK, so we don't need
> any checks and supporting code for CNL. Remove code and rename
> functions/macros accordingly.
>
> Signed-off-by: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/display/intel_cdclk.c | 72 +++++-----------------
> drivers/gpu/drm/i915/i915_reg.h | 4 +-
> 2 files changed, 18 insertions(+), 58 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
> index ff35c29508d5..34fa4130d5c4 100644
> --- a/drivers/gpu/drm/i915/display/intel_cdclk.c
> +++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
> @@ -1195,17 +1195,6 @@ static const struct intel_cdclk_vals glk_cdclk_table[] = {
> {}
> };
>
> -static const struct intel_cdclk_vals cnl_cdclk_table[] = {
> - { .refclk = 19200, .cdclk = 168000, .divider = 4, .ratio = 35 },
> - { .refclk = 19200, .cdclk = 336000, .divider = 2, .ratio = 35 },
> - { .refclk = 19200, .cdclk = 528000, .divider = 2, .ratio = 55 },
> -
> - { .refclk = 24000, .cdclk = 168000, .divider = 4, .ratio = 28 },
> - { .refclk = 24000, .cdclk = 336000, .divider = 2, .ratio = 28 },
> - { .refclk = 24000, .cdclk = 528000, .divider = 2, .ratio = 44 },
> - {}
> -};
> -
> static const struct intel_cdclk_vals icl_cdclk_table[] = {
> { .refclk = 19200, .cdclk = 172800, .divider = 2, .ratio = 18 },
> { .refclk = 19200, .cdclk = 192000, .divider = 2, .ratio = 20 },
> @@ -1339,16 +1328,6 @@ static u8 bxt_calc_voltage_level(int cdclk)
> return DIV_ROUND_UP(cdclk, 25000);
> }
>
> -static u8 cnl_calc_voltage_level(int cdclk)
> -{
> - if (cdclk > 336000)
> - return 2;
> - else if (cdclk > 168000)
> - return 1;
> - else
> - return 0;
> -}
> -
> static u8 icl_calc_voltage_level(int cdclk)
> {
> if (cdclk > 556800)
> @@ -1383,15 +1362,6 @@ static u8 tgl_calc_voltage_level(int cdclk)
> return 0;
> }
>
> -static void cnl_readout_refclk(struct drm_i915_private *dev_priv,
> - struct intel_cdclk_config *cdclk_config)
> -{
> - if (intel_de_read(dev_priv, SKL_DSSM) & CNL_DSSM_CDCLK_PLL_REFCLK_24MHz)
> - cdclk_config->ref = 24000;
> - else
> - cdclk_config->ref = 19200;
> -}
> -
> static void icl_readout_refclk(struct drm_i915_private *dev_priv,
> struct intel_cdclk_config *cdclk_config)
> {
> @@ -1422,8 +1392,6 @@ static void bxt_de_pll_readout(struct drm_i915_private *dev_priv,
> cdclk_config->ref = 38400;
> else if (DISPLAY_VER(dev_priv) >= 11)
> icl_readout_refclk(dev_priv, cdclk_config);
> - else if (IS_CANNONLAKE(dev_priv))
> - cnl_readout_refclk(dev_priv, cdclk_config);
> else
> cdclk_config->ref = 19200;
>
> @@ -1439,11 +1407,11 @@ static void bxt_de_pll_readout(struct drm_i915_private *dev_priv,
> }
>
> /*
> - * CNL+ have the ratio directly in the PLL enable register, gen9lp had
> - * it in a separate PLL control register.
> + * DISPLAY_VER >= 11 have the ratio directly in the PLL enable register,
> + * gen9lp had it in a separate PLL control register.
> */
> - if (DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv))
> - ratio = val & CNL_CDCLK_PLL_RATIO_MASK;
> + if (DISPLAY_VER(dev_priv) >= 11)
> + ratio = val & ICL_CDCLK_PLL_RATIO_MASK;
> else
> ratio = intel_de_read(dev_priv, BXT_DE_PLL_CTL) & BXT_DE_PLL_RATIO_MASK;
>
> @@ -1530,7 +1498,7 @@ static void bxt_de_pll_enable(struct drm_i915_private *dev_priv, int vco)
> dev_priv->cdclk.hw.vco = vco;
> }
>
> -static void cnl_cdclk_pll_disable(struct drm_i915_private *dev_priv)
> +static void icl_cdclk_pll_disable(struct drm_i915_private *dev_priv)
> {
> intel_de_rmw(dev_priv, BXT_DE_PLL_ENABLE,
> BXT_DE_PLL_PLL_ENABLE, 0);
> @@ -1542,12 +1510,12 @@ static void cnl_cdclk_pll_disable(struct drm_i915_private *dev_priv)
> dev_priv->cdclk.hw.vco = 0;
> }
>
> -static void cnl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco)
> +static void icl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco)
> {
> int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk.hw.ref);
> u32 val;
>
> - val = CNL_CDCLK_PLL_RATIO(ratio);
> + val = ICL_CDCLK_PLL_RATIO(ratio);
> intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val);
>
> val |= BXT_DE_PLL_PLL_ENABLE;
> @@ -1566,7 +1534,7 @@ static void adlp_cdclk_pll_crawl(struct drm_i915_private *dev_priv, int vco)
> u32 val;
>
> /* Write PLL ratio without disabling */
> - val = CNL_CDCLK_PLL_RATIO(ratio) | BXT_DE_PLL_PLL_ENABLE;
> + val = ICL_CDCLK_PLL_RATIO(ratio) | BXT_DE_PLL_PLL_ENABLE;
> intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val);
>
> /* Submit freq change request */
> @@ -1635,7 +1603,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
> int ret;
>
> /* Inform power controller of upcoming frequency change. */
> - if (DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv))
> + if (DISPLAY_VER(dev_priv) >= 11)
> ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
> SKL_CDCLK_PREPARE_FOR_CHANGE,
> SKL_CDCLK_READY_FOR_CHANGE,
> @@ -1659,13 +1627,13 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
> if (HAS_CDCLK_CRAWL(dev_priv) && dev_priv->cdclk.hw.vco > 0 && vco > 0) {
> if (dev_priv->cdclk.hw.vco != vco)
> adlp_cdclk_pll_crawl(dev_priv, vco);
> - } else if (DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)) {
> + } else if (DISPLAY_VER(dev_priv) >= 11) {
> if (dev_priv->cdclk.hw.vco != 0 &&
> dev_priv->cdclk.hw.vco != vco)
> - cnl_cdclk_pll_disable(dev_priv);
> + icl_cdclk_pll_disable(dev_priv);
>
> if (dev_priv->cdclk.hw.vco != vco)
> - cnl_cdclk_pll_enable(dev_priv, vco);
> + icl_cdclk_pll_enable(dev_priv, vco);
> } else {
> if (dev_priv->cdclk.hw.vco != 0 &&
> dev_priv->cdclk.hw.vco != vco)
> @@ -1691,7 +1659,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
> if (pipe != INVALID_PIPE)
> intel_wait_for_vblank(dev_priv, pipe);
>
> - if (DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)) {
> + if (DISPLAY_VER(dev_priv) >= 11) {
> ret = sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
> cdclk_config->voltage_level);
> } else {
> @@ -1716,7 +1684,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
>
> intel_update_cdclk(dev_priv);
>
> - if (DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv))
> + if (DISPLAY_VER(dev_priv) >= 11)
> /*
> * Can't read out the voltage level :(
> * Let's just assume everything is as expected.
> @@ -2125,7 +2093,7 @@ int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state)
> crtc_state->port_clock >= 540000 &&
> crtc_state->lane_count == 4) {
> if (DISPLAY_VER(dev_priv) == 10) {
> - /* Display WA #1145: glk,cnl */
> + /* Display WA #1145: glk */
> min_cdclk = max(316800, min_cdclk);
> } else if (DISPLAY_VER(dev_priv) == 9 || IS_BROADWELL(dev_priv)) {
> /* Display WA #1144: skl,bxt */
> @@ -2246,7 +2214,7 @@ static int intel_compute_min_cdclk(struct intel_cdclk_state *cdclk_state)
>
> /*
> * Account for port clock min voltage level requirements.
> - * This only really does something on CNL+ but can be
> + * This only really does something on DISPLA_VER >= 11 but can be
> * called on earlier platforms as well.
> *
> * Note that this functions assumes that 0 is
> @@ -2660,8 +2628,6 @@ void intel_update_max_cdclk(struct drm_i915_private *dev_priv)
> dev_priv->max_cdclk_freq = 648000;
> else
> dev_priv->max_cdclk_freq = 652800;
> - } else if (IS_CANNONLAKE(dev_priv)) {
> - dev_priv->max_cdclk_freq = 528000;
> } else if (IS_GEMINILAKE(dev_priv)) {
> dev_priv->max_cdclk_freq = 316800;
> } else if (IS_BROXTON(dev_priv)) {
> @@ -2925,12 +2891,6 @@ void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv)
> dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
> dev_priv->display.calc_voltage_level = icl_calc_voltage_level;
> dev_priv->cdclk.table = icl_cdclk_table;
> - } else if (IS_CANNONLAKE(dev_priv)) {
> - dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
> - dev_priv->display.set_cdclk = bxt_set_cdclk;
> - dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
> - dev_priv->display.calc_voltage_level = cnl_calc_voltage_level;
> - dev_priv->cdclk.table = cnl_cdclk_table;
> } else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
> dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
> dev_priv->display.set_cdclk = bxt_set_cdclk;
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 8e1392028184..6a894ffd91e1 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -11016,8 +11016,8 @@ enum skl_power_gate {
> #define BXT_DE_PLL_LOCK (1 << 30)
> #define BXT_DE_PLL_FREQ_REQ (1 << 23)
> #define BXT_DE_PLL_FREQ_REQ_ACK (1 << 22)
> -#define CNL_CDCLK_PLL_RATIO(x) (x)
> -#define CNL_CDCLK_PLL_RATIO_MASK 0xff
> +#define ICL_CDCLK_PLL_RATIO(x) (x)
> +#define ICL_CDCLK_PLL_RATIO_MASK 0xff
We could take this opportunity to switch to REG_GENMASK, REG_FIELD_PREP
here. Otherwise,
Reviewed-by: Matt Roper <matthew.d.roper@xxxxxxxxx>
>
> /* GEN9 DC */
> #define DC_STATE_EN _MMIO(0x45504)
> --
> 2.31.1
>
--
Matt Roper
Graphics Software Engineer
VTT-OSGC Platform Enablement
Intel Corporation
(916) 356-2795
