Re: [PATCH 3/3] drm/panel-simple: add Gopher 2b LCD panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello, thanks, Paul. I've sent V2.

On 22/07/2021 17.12, Paul Cercueil wrote:
Hi Artjom,

Le jeu., juil. 22 2021 at 17:04:32 +0300, Artjom Vejsel <akawolf0@xxxxxxxxx> a écrit :
The Gopher 2b LCD panel is used in Gopher 2b handhelds.
It's simple panel with NewVision NV3047 driver,
but SPI lines are not connected.
It has no specific name, since it's unique to that handhelds.
lot name at AliExpress: 4.3 inch 40PIN TFT LCD Screen COG
NV3047 Drive IC 480(RGB)*272 No Touch 24Bit RGB Interface

Signed-off-by: Artjom Vejsel <akawolf0@xxxxxxxxx>
---
 drivers/gpu/drm/panel/panel-simple.c | 44 ++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 9b286bd4444f..9cce6b63a147 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -4306,6 +4306,47 @@ static const struct panel_desc yes_optoelectronics_ytc700tlag_05_201c = {
     .connector_type = DRM_MODE_CONNECTOR_LVDS,
 };

+static const struct drm_display_mode qishenglong_gopher2b_lcd_panel_modes[] = {
+    { /* 60 Hz */
+        .clock = 10800,
+        .hdisplay = 480,
+        .hsync_start = 480 + 77,
+        .hsync_end = 480 + 77 + 41,
+        .htotal = 480 + 77 + 41 + 2,
+        .vdisplay = 272,
+        .vsync_start = 272 + 16,
+        .vsync_end = 272 + 16 + 10,
+        .vtotal = 272 + 16 + 10 + 2,
+        .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+    },
+    { /* 50 Hz */
+        .clock = 10800,
+        .hdisplay = 480,
+        .hsync_start = 480 + 17,
+        .hsync_end = 480 + 17 + 41,
+        .htotal = 480 + 17 + 41 + 2,
+        .vdisplay = 272,
+        .vsync_start = 272 + 116,
+        .vsync_end = 272 + 116 + 10,
+        .vtotal = 272 + 116 + 10 + 2,
+        .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+    },
+};
+
+static const struct panel_desc qishenglong_gopher2b_lcd_panel = {
+    .modes = qishenglong_gopher2b_lcd_panel_modes,
+    .num_modes = ARRAY_SIZE(qishenglong_gopher2b_lcd_panel_modes),
+    .num_modes = 1,

Thank you for your patch. From a quick look though, you have .num_modes listed twice here. I believe the second line should be removed.

Cheers,
-Paul

+    .bpc = 8,
+    .size = {
+        .width = 95,
+        .height = 54,
+    },
+    .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+    .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE,
+    .connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
 static const struct drm_display_mode arm_rtsm_mode[] = {
     {
         .clock = 65000,
@@ -4753,6 +4794,9 @@ static const struct of_device_id platform_of_match[] = {
     }, {
         .compatible = "yes-optoelectronics,ytc700tlag-05-201c",
         .data = &yes_optoelectronics_ytc700tlag_05_201c,
+    }, {
+        .compatible = "qishenglong,gopher2b-lcd-panel",
+        .data = &qishenglong_gopher2b_lcd_panel,
     }, {
         /* Must be the last entry */
         .compatible = "panel-dpi",
--
2.32.0





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux