Re: [Linaro-mm-sig] [PATCH] drm/msm: Add fence->wait() op

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 21.07.21 um 21:03 schrieb Daniel Vetter:
On Wed, Jul 21, 2021 at 09:34:43AM -0700, Rob Clark wrote:
On Wed, Jul 21, 2021 at 12:59 AM Daniel Vetter <daniel@xxxxxxxx> wrote:
On Wed, Jul 21, 2021 at 12:32 AM Rob Clark <robdclark@xxxxxxxxx> wrote:
On Tue, Jul 20, 2021 at 1:55 PM Daniel Vetter <daniel@xxxxxxxx> wrote:
On Tue, Jul 20, 2021 at 8:26 PM Rob Clark <robdclark@xxxxxxxxx> wrote:
On Tue, Jul 20, 2021 at 11:03 AM Christian König
<ckoenig.leichtzumerken@xxxxxxxxx> wrote:
Hi Rob,

Am 20.07.21 um 17:07 schrieb Rob Clark:
From: Rob Clark <robdclark@xxxxxxxxxxxx>

Somehow we had neither ->wait() nor dma_fence_signal() calls, and no
one noticed.  Oops.

I'm not sure if that is a good idea.

The dma_fence->wait() callback is pretty much deprecated and should not
be used any more.

What exactly do you need that for?
Well, the alternative is to track the set of fences which have
signalling enabled, and then figure out which ones to signal, which
seems like a lot more work, vs just re-purposing the wait
implementation we already have for non-dma_fence cases ;-)

Why is the ->wait() callback (pretty much) deprecated?
Because if you need it that means for your driver dma_fence_add_cb is
broken, which means a _lot_ of things don't work. Like dma_buf poll
(compositors have patches to start using that), and I think
drm/scheduler also becomes rather unhappy.
I'm starting to page back in how this works.. fence cb's aren't broken
(which is also why dma_fence_wait() was not completely broken),
because in retire_submits() we call
dma_fence_is_signaled(submit->hw_fence).

But the reason that the custom wait function cleans up a tiny bit of
jank is that the wait_queue_head_t gets signaled earlier, before we
start iterating the submits and doing all that retire_submit() stuff
(unpin/unref bo's, etc).  I suppose I could just split things up to
call dma_fence_signal() earlier, and *then* do the retire_submits()
stuff.
Yeah reducing the latency there sounds like a good idea.
-Daniel

Hmm, no, turns out that isn't the problem.. or, well, it is probably a
good idea to call drm_fence_signal() earlier.  But it seems like
waking up from wait_event_* is faster than wake_up_state(wait->task,
TASK_NORMAL).  I suppose the wake_up_state() approach still needs for
the scheduler to get around to schedule the runnable task.

As far as I know wake_up_state() tries to run the thread on the CPU it was scheduled last, while wait_event_* makes the thread run on the CPU who issues the wake by default.

And yes I've also noticed this already and it was one of the reason why I suggested to use a wait_queue instead of the hand wired dma_fence_wait implementation.


So for now, I'm going back to my own wait function (plus earlier
drm_fence_signal())

Before removing dma_fence_opps::wait(), I guess we want to re-think
dma_fence_default_wait().. but I think that would require a
dma_fence_context base class (rather than just a raw integer).
Uh that's not great ... can't we fix this instead of papering over it in
drivers? Aside from maybe different wakeup flags it all is supposed to
work exactly the same underneath, and whether using a wait queue or not
really shouldn't matter.

Well it would have been nicer if we used the existing infrastructure instead of re-inventing stuff for dma_fence, but that chance is long gone.

And you don't need a dma_fence_context base class, but rather just a flag in the dma_fence_ops if you want to change the behavior.

Regards,
Christian.

-Daniel

BR,
-R

BR,
-R

It essentially exists only for old drivers where ->enable_signalling
is unreliable and we paper over that with a retry loop in ->wait and
pray no one notices that it's too butchered. The proper fix is to have
a driver thread to guarantee that ->enable_signalling works reliable,
so you don't need a ->wait.

Can you type up a kerneldoc patch for dma_fence_ops->wait to hammer
this in please?
-Daniel

BR,
-R

Regards,
Christian.

Note that this removes the !timeout case, which has not been used in
a long time.

Signed-off-by: Rob Clark <robdclark@xxxxxxxxxxxx>
---
   drivers/gpu/drm/msm/msm_fence.c | 59 +++++++++++++++++++--------------
   1 file changed, 34 insertions(+), 25 deletions(-)

diff --git a/drivers/gpu/drm/msm/msm_fence.c b/drivers/gpu/drm/msm/msm_fence.c
index cd59a5918038..8ee96b90ded6 100644
--- a/drivers/gpu/drm/msm/msm_fence.c
+++ b/drivers/gpu/drm/msm/msm_fence.c
@@ -38,11 +38,10 @@ static inline bool fence_completed(struct msm_fence_context *fctx, uint32_t fenc
       return (int32_t)(fctx->completed_fence - fence) >= 0;
   }

-/* legacy path for WAIT_FENCE ioctl: */
-int msm_wait_fence(struct msm_fence_context *fctx, uint32_t fence,
-             ktime_t *timeout, bool interruptible)
+static signed long wait_fence(struct msm_fence_context *fctx, uint32_t fence,
+             signed long remaining_jiffies, bool interruptible)
   {
-     int ret;
+     signed long ret;

       if (fence > fctx->last_fence) {
               DRM_ERROR_RATELIMITED("%s: waiting on invalid fence: %u (of %u)\n",
@@ -50,33 +49,34 @@ int msm_wait_fence(struct msm_fence_context *fctx, uint32_t fence,
               return -EINVAL;
       }

-     if (!timeout) {
-             /* no-wait: */
-             ret = fence_completed(fctx, fence) ? 0 : -EBUSY;
+     if (interruptible) {
+             ret = wait_event_interruptible_timeout(fctx->event,
+                     fence_completed(fctx, fence),
+                     remaining_jiffies);
       } else {
-             unsigned long remaining_jiffies = timeout_to_jiffies(timeout);
-
-             if (interruptible)
-                     ret = wait_event_interruptible_timeout(fctx->event,
-                             fence_completed(fctx, fence),
-                             remaining_jiffies);
-             else
-                     ret = wait_event_timeout(fctx->event,
-                             fence_completed(fctx, fence),
-                             remaining_jiffies);
-
-             if (ret == 0) {
-                     DBG("timeout waiting for fence: %u (completed: %u)",
-                                     fence, fctx->completed_fence);
-                     ret = -ETIMEDOUT;
-             } else if (ret != -ERESTARTSYS) {
-                     ret = 0;
-             }
+             ret = wait_event_timeout(fctx->event,
+                     fence_completed(fctx, fence),
+                     remaining_jiffies);
+     }
+
+     if (ret == 0) {
+             DBG("timeout waiting for fence: %u (completed: %u)",
+                             fence, fctx->completed_fence);
+             ret = -ETIMEDOUT;
+     } else if (ret != -ERESTARTSYS) {
+             ret = 0;
       }

       return ret;
   }

+/* legacy path for WAIT_FENCE ioctl: */
+int msm_wait_fence(struct msm_fence_context *fctx, uint32_t fence,
+             ktime_t *timeout, bool interruptible)
+{
+     return wait_fence(fctx, fence, timeout_to_jiffies(timeout), interruptible);
+}
+
   /* called from workqueue */
   void msm_update_fence(struct msm_fence_context *fctx, uint32_t fence)
   {
@@ -114,10 +114,19 @@ static bool msm_fence_signaled(struct dma_fence *fence)
       return fence_completed(f->fctx, f->base.seqno);
   }

+static signed long msm_fence_wait(struct dma_fence *fence, bool intr,
+             signed long timeout)
+{
+     struct msm_fence *f = to_msm_fence(fence);
+
+     return wait_fence(f->fctx, fence->seqno, timeout, intr);
+}
+
   static const struct dma_fence_ops msm_fence_ops = {
       .get_driver_name = msm_fence_get_driver_name,
       .get_timeline_name = msm_fence_get_timeline_name,
       .signaled = msm_fence_signaled,
+     .wait = msm_fence_wait,
   };

   struct dma_fence *


--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch


--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux