[PATCH 01/10] Revert "drm/vc4: dsi: Only register our component once a DSI device is attached"

[Maxime Ripard <maxime@xxxxxxxxxx>]

This reverts commit 7213246a803f9b8da0677adb9ae06a3d8b806d02.

The commit 7213246a803f ("drm/vc4: dsi: Only register our component once
a DSI device is attached") aimed at preventing an endless probe loop
between the DSI host driver and its panel/bridge where both would wait
for each other to probe.

The solution implemented in that commit however relies on the fact that
MIPI-DSI device will either be a MIPI-DSI device, or would call
mipi_dsi_device_register_full() at probe time.

This assumption isn't true for bridges though where most drivers will do
so in the bridge attach hook. However, the drm_bridge_attach is usually
called in the DSI host bind hook, and thus we never get this far,
resulting in a DSI bridge that will never have its attach run, and the
DSI host that will never be bound, effectively creating the same
situation we were trying to avoid for panels.

Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
 drivers/gpu/drm/vc4/vc4_dsi.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
index a55256ed0955..6dfcbd9e234e 100644
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -1257,12 +1257,10 @@ static ssize_t vc4_dsi_host_transfer(struct mipi_dsi_host *host,
 	return ret;
 }
 
-static const struct component_ops vc4_dsi_ops;
 static int vc4_dsi_host_attach(struct mipi_dsi_host *host,
 			       struct mipi_dsi_device *device)
 {
 	struct vc4_dsi *dsi = host_to_dsi(host);
-	int ret;
 
 	dsi->lanes = device->lanes;
 	dsi->channel = device->channel;
@@ -1297,12 +1295,6 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host,
 		return 0;
 	}
 
-	ret = component_add(&dsi->pdev->dev, &vc4_dsi_ops);
-	if (ret) {
-		mipi_dsi_host_unregister(&dsi->dsi_host);
-		return ret;
-	}
-
 	return 0;
 }
 
@@ -1689,6 +1681,7 @@ static int vc4_dsi_dev_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct vc4_dsi *dsi;
+	int ret;
 
 	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
 	if (!dsi)
@@ -1696,10 +1689,26 @@ static int vc4_dsi_dev_probe(struct platform_device *pdev)
 	dev_set_drvdata(dev, dsi);
 
 	dsi->pdev = pdev;
+
+	/* Note, the initialization sequence for DSI and panels is
+	 * tricky.  The component bind above won't get past its
+	 * -EPROBE_DEFER until the panel/bridge probes.  The
+	 * panel/bridge will return -EPROBE_DEFER until it has a
+	 * mipi_dsi_host to register its device to.  So, we register
+	 * the host during pdev probe time, so vc4 as a whole can then
+	 * -EPROBE_DEFER its component bind process until the panel
+	 * successfully attaches.
+	 */
 	dsi->dsi_host.ops = &vc4_dsi_host_ops;
 	dsi->dsi_host.dev = dev;
 	mipi_dsi_host_register(&dsi->dsi_host);
 
+	ret = component_add(&pdev->dev, &vc4_dsi_ops);
+	if (ret) {
+		mipi_dsi_host_unregister(&dsi->dsi_host);
+		return ret;
+	}
+
 	return 0;
 }
 
-- 
2.31.1