Re: [PATCH v1] mailbox: cmdq: add instruction time-out interrupt support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 16, 2021 at 2:58 PM Yongqiang Niu
<yongqiang.niu@xxxxxxxxxxxx> wrote:
>
> add time-out cycle setting to make sure time-out interrupt irq
> will happened when instruction time-out for wait and poll
>
> Signed-off-by: Yongqiang Niu <yongqiang.niu@xxxxxxxxxxxx>

Hi, it seems that this series is based on
https://patchwork.kernel.org/project/linux-mediatek/patch/1624440623-4585-4-git-send-email-yongqiang.niu@xxxxxxxxxxxx/?

Please state it if it's not based on linux-next, thanks!

> ---
>  drivers/mailbox/mtk-cmdq-mailbox.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
>
> diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
> index de4793e..9a76bcd 100644
> --- a/drivers/mailbox/mtk-cmdq-mailbox.c
> +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> @@ -35,6 +35,7 @@
>  #define CMDQ_THR_END_ADDR              0x24
>  #define CMDQ_THR_WAIT_TOKEN            0x30
>  #define CMDQ_THR_PRIORITY              0x40
> +#define CMDQ_THR_INSTN_TIMEOUT_CYCLES  0x50
>
>  #define GCE_GCTL_VALUE                 0x48
>
> @@ -53,6 +54,15 @@
>  #define CMDQ_JUMP_BY_OFFSET            0x10000000
>  #define CMDQ_JUMP_BY_PA                        0x10000001
>
> +/*
> + * instruction time-out
> + * cycles to issue instruction time-out interrupt for wait and poll instructions
> + * GCE axi_clock 156MHz
> + * 1 cycle = 6.41ns
> + * instruction time out 2^22*2*6.41ns = 53ms
> + */
> +#define CMDQ_INSTN_TIMEOUT_CYCLES      22
> +
>  struct cmdq_thread {
>         struct mbox_chan        *chan;
>         void __iomem            *base;
> @@ -368,6 +378,7 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
>                 writel((task->pa_base + pkt->cmd_buf_size) >> cmdq->shift_pa,
>                        thread->base + CMDQ_THR_END_ADDR);
>
> +               writel(CMDQ_INSTN_TIMEOUT_CYCLES, thread->base + CMDQ_THR_INSTN_TIMEOUT_CYCLES);
>                 writel(thread->priority, thread->base + CMDQ_THR_PRIORITY);
>                 writel(CMDQ_THR_IRQ_EN, thread->base + CMDQ_THR_IRQ_ENABLE);
>                 writel(CMDQ_THR_ENABLED, thread->base + CMDQ_THR_ENABLE_TASK);
> --
> 1.8.1.1.dirty
>



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux