Re: [PATCH v6 03/11] iommu/mediatek: Add device_link between the consumer and the larb devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2021-07-14 at 10:26 +0200, Dafna Hirschfeld wrote:
> 
> On 14.07.21 04:56, Yong Wu wrote:
> > MediaTek IOMMU-SMI diagram is like below. all the consumer connect with
> > smi-larb, then connect with smi-common.
> > 
> >          M4U
> >           |
> >      smi-common
> >           |
> >    -------------
> >    |         |    ...
> >    |         |
> > larb1     larb2
> >    |         |
> > vdec       venc
> > 
> > When the consumer works, it should enable the smi-larb's power which
> > also need enable the smi-common's power firstly.
> > 
> > Thus, First of all, use the device link connect the consumer and the
> > smi-larbs. then add device link between the smi-larb and smi-common.
> > 
> > This patch adds device_link between the consumer and the larbs.
> > 
> > When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
> > pm_runtime_xx to keep the original status of clocks. It can avoid two
> > issues:
> > 1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
> > all the clocks are enabled before entering kernel, but the clocks for
> > display HW(always in larb0) will be gated after clk_enable and clk_disable
> > called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
> > operation happened before display driver probe. At that time, the display
> > HW will be abnormal.
> > 
> > 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
> > pm_runtime_xx to avoid the deadlock.
> > 
> > Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
> > device_link_removed should be added explicitly.
> > 
> > [1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
> > [2] https://lore.kernel.org/patchwork/patch/1086569/
> > 
> > Suggested-by: Tomasz Figa <tfiga@xxxxxxxxxxxx>
> > Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx>
> > ---
> >   drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
> >   drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
> >   2 files changed, 41 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index a02dde094788..ee742900cf4b 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -571,22 +571,44 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
> >   {
> >   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> >   	struct mtk_iommu_data *data;
> > +	struct device_link *link;
> > +	struct device *larbdev;
> > +	unsigned int larbid;
> >   
> >   	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
> >   		return ERR_PTR(-ENODEV); /* Not a iommu client device */
> >   
> >   	data = dev_iommu_priv_get(dev);
> >   
> > +	/*
> > +	 * Link the consumer device with the smi-larb device(supplier)
> > +	 * The device in each a larb is a independent HW. thus only link
> > +	 * one larb here.
> > +	 */
> > +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
> > +	larbdev = data->larb_imu[larbid].dev;
> > +	link = device_link_add(dev, larbdev,
> > +			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
> > +	if (!link)
> > +		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
> shoudn't ERR_PTR be returned in case of failure?

In the previous design, this is not a fatal error. the consumer device
could probe continuously even though it fail here..Returning here may
let the issue be caught earlier, I will add this in next version.

 if (!link) {
      ...
      return ERR_PTR(EINVAL);
  }

> 
> Thanks,
> Dafna
> 
> >   	return &data->iommu;
> >   }
> >   
> >   static void mtk_iommu_release_device(struct device *dev)
> >   {
> >   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> > +	struct mtk_iommu_data *data;
> > +	struct device *larbdev;
> > +	unsigned int larbid;
> >   
> >   	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
> >   		return;
> >   
> > +	data = dev_iommu_priv_get(dev);
> > +	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
> > +	larbdev = data->larb_imu[larbid].dev;
> > +	device_link_remove(dev, larbdev);
> > +
> >   	iommu_fwspec_free(dev);
> >   }
> >   
> > diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
> > index d9365a3d8dc9..d2a7c66b8239 100644
> > --- a/drivers/iommu/mtk_iommu_v1.c
> > +++ b/drivers/iommu/mtk_iommu_v1.c
> > @@ -424,7 +424,9 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
> >   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> >   	struct of_phandle_args iommu_spec;
> >   	struct mtk_iommu_data *data;
> > -	int err, idx = 0;
> > +	int err, idx = 0, larbid;
> > +	struct device_link *link;
> > +	struct device *larbdev;
> >   
> >   	while (!of_parse_phandle_with_args(dev->of_node, "iommus",
> >   					   "#iommu-cells",
> > @@ -445,6 +447,14 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
> >   
> >   	data = dev_iommu_priv_get(dev);
> >   
> > +	/* Link the consumer device with the smi-larb device(supplier) */
> > +	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
> > +	larbdev = data->larb_imu[larbid].dev;
> > +	link = device_link_add(dev, larbdev,
> > +			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
> > +	if (!link)
> > +		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
> > +
> >   	return &data->iommu;
> >   }
> >   
> > @@ -465,10 +475,18 @@ static void mtk_iommu_probe_finalize(struct device *dev)
> >   static void mtk_iommu_release_device(struct device *dev)
> >   {
> >   	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> > +	struct mtk_iommu_data *data;
> > +	struct device *larbdev;
> > +	unsigned int larbid;
> >   
> >   	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
> >   		return;
> >   
> > +	data = dev_iommu_priv_get(dev);
> > +	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
> > +	larbdev = data->larb_imu[larbid].dev;
> > +	device_link_remove(dev, larbdev);
> > +
> >   	iommu_fwspec_free(dev);
> >   }
> >   
> > 





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux