On Wed, Jul 07, 2021 at 03:30:51PM +0800, Xin Ji wrote:
> On Thu, Jun 24, 2021 at 01:57:22PM +0200, Robert Foss wrote:
> > Hey Xin,
> >
> > I would like to merge this series now, but this patch needs a review
> > first. Maybe Laurent/Rob Herring are good candidates.
> >
> >
> > Rob.
> Hi Rob, I get Laurent/Rob comments before, and explained why we needs
> these DT properties, so far, I didn't get any response.
Do I have to go dig that up? If it was more than a week ago, assume I
don't remember. This is 1 of 100 bindings a week.
Justify why this is needed in your commit message.
> Hi Rob Herring and Laurent, for the DT property lane0/1-swing, Google
> engineer has strong demond for them, they don't want to move DP swing
> adjusting to kernel, thus may cause change the driver code in each
> project, so config them in DT is a best option.
Where's the ack from a Google engineer?
>
> Thanks,
> Xin
> >
> > On Tue, 22 Jun 2021 at 14:31, Xin Ji <xji@xxxxxxxxxxxxxxxx> wrote:
> > >
> > > Add 'bus-type' and 'data-lanes' define for port0. Define DP tx lane0,
> > > lane1 swing register array define, and audio enable flag.
> > >
> > > Signed-off-by: Xin Ji <xji@xxxxxxxxxxxxxxxx>
> > > ---
> > > .../display/bridge/analogix,anx7625.yaml | 57 ++++++++++++++++++-
> > > 1 file changed, 56 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > > index ab48ab2f4240..9e604d19a3d5 100644
> > > --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > > +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > > @@ -43,6 +43,26 @@ properties:
> > > vdd33-supply:
> > > description: Regulator that provides the supply 3.3V power.
> > >
> > > + analogix,lane0-swing:
> > > + $ref: /schemas/types.yaml#/definitions/uint32-array
> > > + minItems: 1
> > > + maxItems: 20
> > > + description:
> > > + an array of swing register setting for DP tx lane0 PHY, please don't
> > > + add this property, or contact vendor.
Why do we have the property if we're not supposed to add it.
> > > +
> > > + analogix,lane1-swing:
> > > + $ref: /schemas/types.yaml#/definitions/uint32-array
> > > + minItems: 1
> > > + maxItems: 20
> > > + description:
> > > + an array of swing register setting for DP tx lane1 PHY, please don't
> > > + add this property, or contact vendor.
> > > +
> > > + analogix,audio-enable:
> > > + type: boolean
> > > + description: let the driver enable audio HDMI codec function or not.
Wouldn't we have a 'port' node if audio is to be enabled?
> > > +
> > > ports:
> > > $ref: /schemas/graph.yaml#/properties/ports
> > >
> > > @@ -50,13 +70,43 @@ properties:
> > > port@0:
> > > $ref: /schemas/graph.yaml#/properties/port
> > > description:
> > > - Video port for MIPI DSI input.
> > > + MIPI DSI/DPI input.
> > > +
> > > + properties:
> > > + endpoint:
> > > + $ref: /schemas/media/video-interfaces.yaml#
> > > + type: object
> > > + additionalProperties: false
Use 'unevaluatedProperties: false' instead...
> > > +
> > > + properties:
> > > + remote-endpoint: true
...And drop this.
> > > + bus-type: true
This device supports all the possible bus types? What's the default as
it is not required?
> > > + data-lanes: true
And up to 8 lanes?
> > > +
> > > + required:
> > > + - remote-endpoint
> > > +
> > > + required:
> > > + - endpoint
You can drop both 'required'.
> > > +
> > >
> > > port@1:
> > > $ref: /schemas/graph.yaml#/properties/port
> > > description:
> > > Video port for panel or connector.
> > >
> > > + properties:
> > > + endpoint:
> > > + $ref: /schemas/media/video-interfaces.yaml#
Doesn't look like anything from video-interfaces.yaml is used. This
whole chunk is not needed.
> > > + type: object
> > > + additionalProperties: false
> > > +
> > > + properties:
> > > + remote-endpoint: true
> > > +
> > > + required:
> > > + - remote-endpoint
> > > +
> > > required:
> > > - port@0
> > > - port@1
> > > @@ -87,6 +137,9 @@ examples:
> > > vdd10-supply = <&pp1000_mipibrdg>;
> > > vdd18-supply = <&pp1800_mipibrdg>;
> > > vdd33-supply = <&pp3300_mipibrdg>;
> > > + analogix,audio-enable;
> > > + analogix,lane0-swing = <0x14 0x54 0x64 0x74 0x29 0x7b 0x77 0x5b>;
> > > + analogix,lane1-swing = <0x14 0x54 0x64 0x74 0x29 0x7b 0x77 0x5b>;
> > >
> > > ports {
> > > #address-cells = <1>;
> > > @@ -96,6 +149,8 @@ examples:
> > > reg = <0>;
> > > anx7625_in: endpoint {
> > > remote-endpoint = <&mipi_dsi>;
> > > + bus-type = <5>;
> > > + data-lanes = <0 1 2 3>;
> > > };
> > > };
> > >
> > > --
> > > 2.25.1
> > >
>
