Hi Sam,
Am Freitag, dem 09.07.2021 um 20:08 +0200 schrieb Sam Ravnborg:
> Hi Yunus,
>
> On Tue, Jul 06, 2021 at 09:59:07AM +0200, Yunus Bas wrote:
> > From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
> >
> > This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd
> > panel
> > to DRM simple panel driver.
> >
> > Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
> > Signed-off-by: Yunus Bas <y.bas@xxxxxxxxx>
> > ---
> > Changes in v3:
> > - No changes in general, added additional maintainers and also
> > sending
> > to general kernel mailing list
> > ---
> > drivers/gpu/drm/panel/panel-simple.c | 29
> > ++++++++++++++++++++++++++++
> > 1 file changed, 29 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-simple.c
> > b/drivers/gpu/drm/panel/panel-simple.c
> > index 21939d4352cf..07433bff6c2b 100644
> > --- a/drivers/gpu/drm/panel/panel-simple.c
> > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > @@ -2008,6 +2008,32 @@ static const struct panel_desc
> > edt_et057090dhu = {
> > .connector_type = DRM_MODE_CONNECTOR_DPI,
> > };
> >
> > +static const struct drm_display_mode edt_etmv570g2dhu_mode = {
> > + .clock = 25175,
> > + .hdisplay = 640,
> > + .hsync_start = 640,
> > + .hsync_end = 640 + 16,
> > + .htotal = 640 + 16 + 30 + 114,
> > + .vdisplay = 480,
> > + .vsync_start = 480 + 10,
> > + .vsync_end = 480 + 10 + 3,
> > + .vtotal = 480 + 10 + 3 + 35,
> > + .flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_PHSYNC,
> > +};
> > +
> > +static const struct panel_desc edt_etmv570g2dhu = {
> > + .modes = &edt_etmv570g2dhu_mode,
> > + .num_modes = 1,
> > + .bpc = 6,
> > + .size = {
> > + .width = 115,
> > + .height = 86,
> > + },
> > + .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> > + .bus_flags = DRM_BUS_FLAG_DE_HIGH |
> > DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
> > + .connector_type = DRM_MODE_CONNECTOR_DPI,
> > +};
> > +
> > static const struct drm_display_mode edt_etm0700g0dh6_mode = {
> > .clock = 33260,
> > .hdisplay = 800,
> > @@ -4338,6 +4364,9 @@ static const struct of_device_id
> > platform_of_match[] = {
> > }, {
> > .compatible = "edt,et057090dhu",
> > .data = &edt_et057090dhu,
> > + }, {
> > + .compatible = "edt,etmv570g2dhu",
> > + .data = &edt_etmv570g2dhu,
> > }, {
> > .compatible = "edt,et070080dh6",
> > .data = &edt_etm0700g0dh6,
>
> This list must be alphabetically sorted after compatible.
>
> "edt,etmv570g2dhu" comes after "edt,et070080dh6"
>
> The same order must be used where edt_etmv570g2dhu is defined.
> Sorry for this nit, but if we fails to follw it we will soon have
> chaos.
Of course, sorry for not noticing earlier. I will change this.
Regards, Yunus
>
> The rest looks good, everything needed is defined.
>
> Sam
--
Mit freundlichen Grüßen
Yunus Bas
-Software Engineer-
PHYTEC Messtechnik GmbH
Robert-Koch-Str. 39
55129 Mainz
Germany
Tel.: +49 (0)6131 9221- 466
Web: www.phytec.de
Sie finden uns auch auf: Facebook, LinkedIn, Xing, YouTube
PHYTEC Messtechnik GmbH | Robert-Koch-Str. 39 | 55129 Mainz, Germany
Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber |
Handelsregister Mainz HRB 4656 | Finanzamt Mainz | St.Nr. 266500608, DE
149059855
This E-Mail may contain confidential or privileged information. If you
are not the intended recipient (or have received this E-Mail in error)
please notify the sender immediately and destroy this E-Mail. Any
unauthorized copying, disclosure or distribution of the material in
this E-Mail is strictly forbidden.
