Re: [Freedreno] [PATCH 8/8] drm/msm/dsi: remove msm_dsi_dphy_timing from msm_dsi_phy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 22 Jun 2021 at 01:44, <abhinavk@xxxxxxxxxxxxxx> wrote:
>
> On 2021-05-15 06:12, Dmitry Baryshkov wrote:
> > Remove struct msm_dsi_dphy_timing field from the struct msm_dsi_phy.
> > There is no need to store them.
> >
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> > ---
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy.c          | 18 ++++++++++++++----
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy.h          | 10 ++++++++--
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c     | 11 +++--------
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c     | 11 +++--------
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c     | 10 ++--------
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c     | 12 ++++--------
> >  .../gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c    | 10 ++--------
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c      | 13 ++++---------
> >  8 files changed, 40 insertions(+), 55 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> > b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> > index 53a02c02dd6e..47145cab6b55 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> > @@ -453,6 +453,8 @@ int msm_dsi_dphy_timing_calc_v4(struct
> > msm_dsi_dphy_timing *timing,
> >       tmax = 255;
> >       timing->shared_timings.clk_pre = DIV_ROUND_UP((tmax - tmin) * 125,
> > 10000) + tmin;
> >
> > +     timing->bitclk_rate = bit_rate;
> > +
>
> I didnt follow this part of the change. agreed that 7nm PHY is using
> this but
> why do we need to start storing this in the timing node.
> Why cant we continue using it from msm_dsi_phy_clk_request?

As I wrote earlier
(https://lore.kernel.org/linux-arm-msm/71839b49-554c-fcc4-d110-0c8a49905413@xxxxxxxxxx/),
I'd withdraw/ignore patch 8 for now, but the rest of the patchseries
is valid.

Thank you for your review. I'll repost the series w/o patch 8 and with
the dsi.yaml changes included.

>
> >       DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
> >               timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
> >               timing->clk_zero, timing->clk_trail, timing->clk_prepare,
> > timing->hs_exit,
> > @@ -756,6 +758,7 @@ int msm_dsi_phy_enable(struct msm_dsi_phy *phy,
> >                       struct msm_dsi_phy_shared_timings *shared_timings)
> >  {
> >       struct device *dev = &phy->pdev->dev;
> > +     struct msm_dsi_dphy_timing timing;
> >       int ret;
> >
> >       if (!phy || !phy->cfg->ops.enable)
> > @@ -775,15 +778,22 @@ int msm_dsi_phy_enable(struct msm_dsi_phy *phy,
> >               goto reg_en_fail;
> >       }
> >
> > -     ret = phy->cfg->ops.enable(phy, clk_req);
> > +     if (!phy->cfg->ops.dphy_timing_calc ||
> > +         phy->cfg->ops.dphy_timing_calc(&timing, clk_req)) {
> > +             DRM_DEV_ERROR(&phy->pdev->dev,
> > +                     "%s: D-PHY timing calculation failed\n", __func__);
> > +             return -EINVAL;
> > +     }
> > +
> > +     memcpy(shared_timings, &timing.shared_timings,
> > +            sizeof(*shared_timings));
> > +
> > +     ret = phy->cfg->ops.enable(phy, &timing);
> >       if (ret) {
> >               DRM_DEV_ERROR(dev, "%s: phy enable failed, %d\n", __func__, ret);
> >               goto phy_en_fail;
> >       }
> >
> > -     memcpy(shared_timings, &phy->timing.shared_timings,
> > -            sizeof(*shared_timings));
> > -
> >       /*
> >        * Resetting DSI PHY silently changes its PLL registers to reset
> > status,
> >        * which will confuse clock driver and result in wrong output rate of
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> > b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> > index 94a77ac364d3..9ba03a242d24 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> > @@ -17,10 +17,14 @@
> >  #define dsi_phy_write_udelay(offset, data, delay_us) {
> > msm_writel((data), (offset)); udelay(delay_us); }
> >  #define dsi_phy_write_ndelay(offset, data, delay_ns) {
> > msm_writel((data), (offset)); ndelay(delay_ns); }
> >
> > +struct msm_dsi_dphy_timing;
> > +
> >  struct msm_dsi_phy_ops {
> >       int (*pll_init)(struct msm_dsi_phy *phy);
> > -     int (*enable)(struct msm_dsi_phy *phy,
> > +     int (*dphy_timing_calc)(struct msm_dsi_dphy_timing *timing,
> >                       struct msm_dsi_phy_clk_request *clk_req);
> > +     int (*enable)(struct msm_dsi_phy *phy,
> > +                     struct msm_dsi_dphy_timing *timing);
> >       void (*disable)(struct msm_dsi_phy *phy);
> >       void (*save_pll_state)(struct msm_dsi_phy *phy);
> >       int (*restore_pll_state)(struct msm_dsi_phy *phy);
> > @@ -73,6 +77,9 @@ struct msm_dsi_dphy_timing {
> >       u32 hs_prep_dly_ckln;
> >       u8 hs_halfbyte_en;
> >       u8 hs_halfbyte_en_ckln;
> > +
> > +     /* For PHY v4 only */
> > +     unsigned long bitclk_rate;
> >  };
> >
> >  #define DSI_BYTE_PLL_CLK             0
> > @@ -90,7 +97,6 @@ struct msm_dsi_phy {
> >       struct clk *ahb_clk;
> >       struct regulator_bulk_data supplies[DSI_DEV_REGULATOR_MAX];
> >
> > -     struct msm_dsi_dphy_timing timing;
> >       const struct msm_dsi_phy_cfg *cfg;
> >
> >       enum msm_dsi_phy_usecase usecase;
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> > b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> > index 34bc93548fcf..bc838ee4f9b9 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> > @@ -789,24 +789,17 @@ static void dsi_phy_hw_v3_0_lane_settings(struct
> > msm_dsi_phy *phy)
> >  }
> >
> >  static int dsi_10nm_phy_enable(struct msm_dsi_phy *phy,
> > -                            struct msm_dsi_phy_clk_request *clk_req)
> > +                            struct msm_dsi_dphy_timing *timing)
> >  {
> >       int ret;
> >       u32 status;
> >       u32 const delay_us = 5;
> >       u32 const timeout_us = 1000;
> > -     struct msm_dsi_dphy_timing *timing = &phy->timing;
> >       void __iomem *base = phy->base;
> >       u32 data;
> >
> >       DBG("");
> >
> > -     if (msm_dsi_dphy_timing_calc_v3(timing, clk_req)) {
> > -             DRM_DEV_ERROR(&phy->pdev->dev,
> > -                     "%s: D-PHY timing calculation failed\n", __func__);
> > -             return -EINVAL;
> > -     }
> > -
> >       if (dsi_phy_hw_v3_0_is_pll_on(phy))
> >               pr_warn("PLL turned on before configuring PHY\n");
> >
> > @@ -929,6 +922,7 @@ const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs = {
> >               },
> >       },
> >       .ops = {
> > +             .dphy_timing_calc = msm_dsi_dphy_timing_calc_v3,
> >               .enable = dsi_10nm_phy_enable,
> >               .disable = dsi_10nm_phy_disable,
> >               .pll_init = dsi_pll_10nm_init,
> > @@ -950,6 +944,7 @@ const struct msm_dsi_phy_cfg dsi_phy_10nm_8998_cfgs
> > = {
> >               },
> >       },
> >       .ops = {
> > +             .dphy_timing_calc = msm_dsi_dphy_timing_calc_v3,
> >               .enable = dsi_10nm_phy_enable,
> >               .disable = dsi_10nm_phy_disable,
> >               .pll_init = dsi_pll_10nm_init,
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> > b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> > index 65d68eb9e3cb..5372d741bc76 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> > @@ -939,9 +939,8 @@ static void dsi_14nm_dphy_set_timing(struct
> > msm_dsi_phy *phy,
> >  }
> >
> >  static int dsi_14nm_phy_enable(struct msm_dsi_phy *phy,
> > -                            struct msm_dsi_phy_clk_request *clk_req)
> > +                            struct msm_dsi_dphy_timing *timing)
> >  {
> > -     struct msm_dsi_dphy_timing *timing = &phy->timing;
> >       u32 data;
> >       int i;
> >       int ret;
> > @@ -949,12 +948,6 @@ static int dsi_14nm_phy_enable(struct msm_dsi_phy
> > *phy,
> >       void __iomem *lane_base = phy->lane_base;
> >       u32 glbl_test_ctrl;
> >
> > -     if (msm_dsi_dphy_timing_calc_v2(timing, clk_req)) {
> > -             DRM_DEV_ERROR(&phy->pdev->dev,
> > -                     "%s: D-PHY timing calculation failed\n", __func__);
> > -             return -EINVAL;
> > -     }
> > -
> >       data = 0x1c;
> >       if (phy->usecase != MSM_DSI_PHY_STANDALONE)
> >               data |= DSI_14nm_PHY_CMN_LDO_CNTRL_VREG_CTRL(32);
> > @@ -1032,6 +1025,7 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs =
> > {
> >               },
> >       },
> >       .ops = {
> > +             .dphy_timing_calc = msm_dsi_dphy_timing_calc_v2,
> >               .enable = dsi_14nm_phy_enable,
> >               .disable = dsi_14nm_phy_disable,
> >               .pll_init = dsi_pll_14nm_init,
> > @@ -1053,6 +1047,7 @@ const struct msm_dsi_phy_cfg
> > dsi_phy_14nm_660_cfgs = {
> >               },
> >       },
> >       .ops = {
> > +             .dphy_timing_calc = msm_dsi_dphy_timing_calc_v2,
> >               .enable = dsi_14nm_phy_enable,
> >               .disable = dsi_14nm_phy_disable,
> >               .pll_init = dsi_pll_14nm_init,
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c
> > b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c
> > index e96d789aea18..b953fb19e292 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c
> > @@ -64,9 +64,8 @@ static void dsi_20nm_phy_regulator_ctrl(struct
> > msm_dsi_phy *phy, bool enable)
> >  }
> >
> >  static int dsi_20nm_phy_enable(struct msm_dsi_phy *phy,
> > -                             struct msm_dsi_phy_clk_request *clk_req)
> > +                            struct msm_dsi_dphy_timing *timing)
> >  {
> > -     struct msm_dsi_dphy_timing *timing = &phy->timing;
> >       int i;
> >       void __iomem *base = phy->base;
> >       u32 cfg_4[4] = {0x20, 0x40, 0x20, 0x00};
> > @@ -74,12 +73,6 @@ static int dsi_20nm_phy_enable(struct msm_dsi_phy
> > *phy,
> >
> >       DBG("");
> >
> > -     if (msm_dsi_dphy_timing_calc(timing, clk_req)) {
> > -             DRM_DEV_ERROR(&phy->pdev->dev,
> > -                     "%s: D-PHY timing calculation failed\n", __func__);
> > -             return -EINVAL;
> > -     }
> > -
> >       dsi_20nm_phy_regulator_ctrl(phy, true);
> >
> >       dsi_phy_write(base + REG_DSI_20nm_PHY_STRENGTH_0, 0xff);
> > @@ -138,6 +131,7 @@ const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs = {
> >               },
> >       },
> >       .ops = {
> > +             .dphy_timing_calc = msm_dsi_dphy_timing_calc,
> >               .enable = dsi_20nm_phy_enable,
> >               .disable = dsi_20nm_phy_disable,
> >       },
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
> > b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
> > index 3304acda2165..e39801d309ed 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
> > @@ -699,21 +699,14 @@ static void dsi_28nm_phy_regulator_ctrl(struct
> > msm_dsi_phy *phy, bool enable)
> >  }
> >
> >  static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy,
> > -                             struct msm_dsi_phy_clk_request *clk_req)
> > +                            struct msm_dsi_dphy_timing *timing)
> >  {
> > -     struct msm_dsi_dphy_timing *timing = &phy->timing;
> >       int i;
> >       void __iomem *base = phy->base;
> >       u32 val;
> >
> >       DBG("");
> >
> > -     if (msm_dsi_dphy_timing_calc(timing, clk_req)) {
> > -             DRM_DEV_ERROR(&phy->pdev->dev,
> > -                     "%s: D-PHY timing calculation failed\n", __func__);
> > -             return -EINVAL;
> > -     }
> > -
> >       dsi_phy_write(base + REG_DSI_28nm_PHY_STRENGTH_0, 0xff);
> >
> >       dsi_28nm_phy_regulator_ctrl(phy, true);
> > @@ -775,6 +768,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs
> > = {
> >               },
> >       },
> >       .ops = {
> > +             .dphy_timing_calc = msm_dsi_dphy_timing_calc,
> >               .enable = dsi_28nm_phy_enable,
> >               .disable = dsi_28nm_phy_disable,
> >               .pll_init = dsi_pll_28nm_init,
> > @@ -796,6 +790,7 @@ const struct msm_dsi_phy_cfg
> > dsi_phy_28nm_hpm_famb_cfgs = {
> >               },
> >       },
> >       .ops = {
> > +             .dphy_timing_calc = msm_dsi_dphy_timing_calc,
> >               .enable = dsi_28nm_phy_enable,
> >               .disable = dsi_28nm_phy_disable,
> >               .pll_init = dsi_pll_28nm_init,
> > @@ -817,6 +812,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs =
> > {
> >               },
> >       },
> >       .ops = {
> > +             .dphy_timing_calc = msm_dsi_dphy_timing_calc,
> >               .enable = dsi_28nm_phy_enable,
> >               .disable = dsi_28nm_phy_disable,
> >               .pll_init = dsi_pll_28nm_init,
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
> > b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
> > index 86e40a0d41a3..7d50822085f2 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
> > @@ -590,19 +590,12 @@ static void dsi_28nm_phy_lane_config(struct
> > msm_dsi_phy *phy)
> >  }
> >
> >  static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy,
> > -                             struct msm_dsi_phy_clk_request *clk_req)
> > +                            struct msm_dsi_dphy_timing *timing)
> >  {
> > -     struct msm_dsi_dphy_timing *timing = &phy->timing;
> >       void __iomem *base = phy->base;
> >
> >       DBG("");
> >
> > -     if (msm_dsi_dphy_timing_calc(timing, clk_req)) {
> > -             DRM_DEV_ERROR(&phy->pdev->dev,
> > -                     "%s: D-PHY timing calculation failed\n", __func__);
> > -             return -EINVAL;
> > -     }
> > -
> >       dsi_28nm_phy_regulator_init(phy);
> >
> >       dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LDO_CTRL, 0x04);
> > @@ -654,6 +647,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs
> > = {
> >               },
> >       },
> >       .ops = {
> > +             .dphy_timing_calc = msm_dsi_dphy_timing_calc,
> >               .enable = dsi_28nm_phy_enable,
> >               .disable = dsi_28nm_phy_disable,
> >               .pll_init = dsi_pll_28nm_8960_init,
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> > b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> > index e76ce40a12ab..993508268a15 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> > @@ -802,13 +802,12 @@ static void dsi_phy_hw_v4_0_lane_settings(struct
> > msm_dsi_phy *phy)
> >  }
> >
> >  static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
> > -                           struct msm_dsi_phy_clk_request *clk_req)
> > +                           struct msm_dsi_dphy_timing *timing)
> >  {
> >       int ret;
> >       u32 status;
> >       u32 const delay_us = 5;
> >       u32 const timeout_us = 1000;
> > -     struct msm_dsi_dphy_timing *timing = &phy->timing;
> >       void __iomem *base = phy->base;
> >       bool less_than_1500_mhz;
> >       u32 vreg_ctrl_0, glbl_str_swi_cal_sel_ctrl, glbl_hstx_str_ctrl_0;
> > @@ -817,12 +816,6 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy
> > *phy,
> >
> >       DBG("");
> >
> > -     if (msm_dsi_dphy_timing_calc_v4(timing, clk_req)) {
> > -             DRM_DEV_ERROR(&phy->pdev->dev,
> > -                     "%s: D-PHY timing calculation failed\n", __func__);
> > -             return -EINVAL;
> > -     }
> > -
> >       if (dsi_phy_hw_v4_0_is_pll_on(phy))
> >               pr_warn("PLL turned on before configuring PHY\n");
> >
> > @@ -838,7 +831,7 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy
> > *phy,
> >       /* TODO: CPHY enable path (this is for DPHY only) */
> >
> >       /* Alter PHY configurations if data rate less than 1.5GHZ*/
> > -     less_than_1500_mhz = (clk_req->bitclk_rate <= 1500000000);
> > +     less_than_1500_mhz = (timing->bitclk_rate <= 1500000000);
> >
> >       if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
> >               vreg_ctrl_0 = less_than_1500_mhz ? 0x53 : 0x52;
> > @@ -965,6 +958,7 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_cfgs = {
> >               },
> >       },
> >       .ops = {
> > +             .dphy_timing_calc = msm_dsi_dphy_timing_calc_v4,
> >               .enable = dsi_7nm_phy_enable,
> >               .disable = dsi_7nm_phy_disable,
> >               .pll_init = dsi_pll_7nm_init,
> > @@ -987,6 +981,7 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs
> > = {
> >               },
> >       },
> >       .ops = {
> > +             .dphy_timing_calc = msm_dsi_dphy_timing_calc_v4,
> >               .enable = dsi_7nm_phy_enable,
> >               .disable = dsi_7nm_phy_disable,
> >               .pll_init = dsi_pll_7nm_init,



-- 
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux