Re: [v7 5/5] drm/panel-simple: Add Samsung ATNA33XC20

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rajeev
On Sat, Jun 19, 2021 at 04:10:30PM +0530, Rajeev Nandan wrote:
> Add Samsung 13.3" FHD eDP AMOLED panel.
> 
> Signed-off-by: Rajeev Nandan <rajeevny@xxxxxxxxxxxxxx>
> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> ---
> 
> Changes in v4:
> - New
> 
> Changes in v5:
> - Remove "uses_dpcd_backlight" property, not required now. (Douglas)
> 
> Changes in v7:
> - Update disable_to_power_off and power_to_enable delays. (Douglas)
> 
>  drivers/gpu/drm/panel/panel-simple.c | 33 +++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 86e5a45..4adc44a 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -3562,6 +3562,36 @@ static const struct panel_desc rocktech_rk101ii01d_ct = {
>  	.connector_type = DRM_MODE_CONNECTOR_LVDS,
>  };
>  
> +static const struct drm_display_mode samsung_atna33xc20_mode = {
> +	.clock = 138770,
> +	.hdisplay = 1920,
> +	.hsync_start = 1920 + 48,
> +	.hsync_end = 1920 + 48 + 32,
> +	.htotal = 1920 + 48 + 32 + 80,
> +	.vdisplay = 1080,
> +	.vsync_start = 1080 + 8,
> +	.vsync_end = 1080 + 8 + 8,
> +	.vtotal = 1080 + 8 + 8 + 16,
> +	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC,
> +};
> +
> +static const struct panel_desc samsung_atna33xc20 = {
> +	.modes = &samsung_atna33xc20_mode,
> +	.num_modes = 1,
> +	.bpc = 10,
> +	.size = {
> +		.width = 294,
> +		.height = 165,
> +	},
> +	.delay = {
> +		.disable_to_power_off = 200,
> +		.power_to_enable = 400,
> +		.hpd_absent_delay = 200,
> +		.unprepare = 500,
> +	},
> +	.connector_type = DRM_MODE_CONNECTOR_eDP,
> +};

bus_format is missing. There should be a warning about this when you
probe the display.

The bpc of 10 in unusual, the current code warns if bpc is neither 6 nor
8. If 10 is correct then update the code to accept bpc=10.

	Sam

> +
>  static const struct drm_display_mode samsung_lsn122dl01_c01_mode = {
>  	.clock = 271560,
>  	.hdisplay = 2560,
> @@ -4563,6 +4593,9 @@ static const struct of_device_id platform_of_match[] = {
>  		.compatible = "rocktech,rk101ii01d-ct",
>  		.data = &rocktech_rk101ii01d_ct,
>  	}, {
> +		.compatible = "samsung,atna33xc20",
> +		.data = &samsung_atna33xc20,
> +	}, {
>  		.compatible = "samsung,lsn122dl01-c01",
>  		.data = &samsung_lsn122dl01_c01,
>  	}, {
> -- 
> 2.7.4



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux