Split the existing documentation to move the comments on particular
fields next to them.
Suggested-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
Changes from v1:
- New patch
---
include/drm/drm_dp_helper.h | 84 +++++++++++++++++++++++++------------
1 file changed, 57 insertions(+), 27 deletions(-)
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 1e85c2021f2f..1c5ae07ff0c7 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -1837,29 +1837,6 @@ struct drm_dp_aux_cec {
/**
* struct drm_dp_aux - DisplayPort AUX channel
- * @name: user-visible name of this AUX channel and the I2C-over-AUX adapter
- * @ddc: I2C adapter that can be used for I2C-over-AUX communication
- * @dev: pointer to struct device that is the parent for this AUX channel
- * @crtc: backpointer to the crtc that is currently using this AUX channel
- * @hw_mutex: internal mutex used for locking transfers
- * @crc_work: worker that captures CRCs for each frame
- * @crc_count: counter of captured frame CRCs
- * @transfer: transfers a message representing a single AUX transaction
- *
- * The @dev field should be set to a pointer to the device that implements the
- * AUX channel.
- *
- * The @name field may be used to specify the name of the I2C adapter. If set to
- * %NULL, dev_name() of @dev will be used.
- *
- * Drivers provide a hardware-specific implementation of how transactions are
- * executed via the @transfer() function. A pointer to a &drm_dp_aux_msg
- * structure describing the transaction is passed into this function. Upon
- * success, the implementation should return the number of payload bytes that
- * were transferred, or a negative error-code on failure. Helpers propagate
- * errors from the @transfer() function, with the exception of the %-EBUSY
- * error, which causes a transaction to be retried. On a short, helpers will
- * return %-EPROTO to make it simpler to check for failure.
*
* An AUX channel can also be used to transport I2C messages to a sink. A
* typical application of that is to access an EDID that's present in the sink
@@ -1870,21 +1847,74 @@ struct drm_dp_aux_cec {
* transfers by default; if a partial response is received, the adapter will
* drop down to the size given by the partial response for this transaction
* only.
- *
- * Note that the aux helper code assumes that the @transfer() function only
- * modifies the reply field of the &drm_dp_aux_msg structure. The retry logic
- * and i2c helpers assume this is the case.
*/
struct drm_dp_aux {
+ /**
+ * @name: user-visible name of this AUX channel and the
+ * I2C-over-AUX adapter.
+ *
+ * It's also used to specify the name of the I2C adapter. If set
+ * to %NULL, dev_name() of @dev will be used.
+ */
const char *name;
+
+ /**
+ * @ddc: I2C adapter that can be used for I2C-over-AUX
+ * communication
+ */
struct i2c_adapter ddc;
+
+ /**
+ * @dev: pointer to struct device that is the parent for this
+ * AUX channel.
+ */
struct device *dev;
+
+ /**
+ * @crtc: backpointer to the crtc that is currently using this
+ * AUX channel
+ */
struct drm_crtc *crtc;
+
+ /**
+ * @hw_mutex: internal mutex used for locking transfers.
+ */
struct mutex hw_mutex;
+
+ /**
+ * @crc_work: worker that captures CRCs for each frame
+ */
struct work_struct crc_work;
+
+ /**
+ * @crc_count: counter of captured frame CRCs
+ */
u8 crc_count;
+
+ /**
+ * @transfer: transfers a message representing a single AUX
+ * transaction.
+ *
+ * This is a hardware-specific implementation of how
+ * transactions are executed that the drivers must provide.
+ *
+ * A pointer to a &drm_dp_aux_msg structure describing the
+ * transaction is passed into this function. Upon success, the
+ * implementation should return the number of payload bytes that
+ * were transferred, or a negative error-code on failure.
+ *
+ * Helpers will propagate these errors, with the exception of
+ * the %-EBUSY error, which causes a transaction to be retried.
+ * On a short, helpers will return %-EPROTO to make it simpler
+ * to check for failure.
+ *
+ * The @transfer() function must only modify the reply field of
+ * the &drm_dp_aux_msg structure. The retry logic and i2c
+ * helpers assume this is the case.
+ */
ssize_t (*transfer)(struct drm_dp_aux *aux,
struct drm_dp_aux_msg *msg);
+
/**
* @i2c_nack_count: Counts I2C NACKs, used for DP validation.
*/
--
2.31.1
