Hi Michael, Am Dienstag, dem 15.06.2021 um 00:17 +0200 schrieb Michael Walle: > The LS1028A SoC errata sheet mentions A-050121 "GPU hangs if clock > gating for Rasterizer, Setup Engine and Texture Engine are enabled". > The workaround is to disable the corresponding clock gatings. > > Signed-off-by: Michael Walle <michael@xxxxxxxx> > --- > drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c > index 4102bcea3341..574e4e04dddc 100644 > --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c > +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c > @@ -613,6 +613,12 @@ static void etnaviv_gpu_enable_mlcg(struct etnaviv_gpu *gpu) > etnaviv_is_model_rev(gpu, GC2000, 0x5108)) > pmc |= VIVS_PM_MODULE_CONTROLS_DISABLE_MODULE_CLOCK_GATING_TX; > > + /* Disable RS, SE, TE clock gating on affected core revisions. */ This comment is wrong. RS (resolver) is a different engine than RA (rasterizer) and the texture engine is abbreviated TX throughout the driver. Regards, Lucas > + if (etnaviv_is_model_rev(gpu, GC7000, 0x6202)) > + pmc |= VIVS_PM_MODULE_CONTROLS_DISABLE_MODULE_CLOCK_GATING_SE | > + VIVS_PM_MODULE_CONTROLS_DISABLE_MODULE_CLOCK_GATING_RA | > + VIVS_PM_MODULE_CONTROLS_DISABLE_MODULE_CLOCK_GATING_TX; > + > pmc |= VIVS_PM_MODULE_CONTROLS_DISABLE_MODULE_CLOCK_GATING_RA_HZ; > pmc |= VIVS_PM_MODULE_CONTROLS_DISABLE_MODULE_CLOCK_GATING_RA_EZ; >
