[v6 3/5] drm/panel-simple: Support for delays between GPIO & regulator

[Rajeev Nandan <rajeevny@xxxxxxxxxxxxxx>]

Some panels datasheets may specify a delay between the enable GPIO and
the regulator. Support this in panel-simple.

Signed-off-by: Rajeev Nandan <rajeevny@xxxxxxxxxxxxxx>
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---

Changes in v4:
- New

Changes in v5:
- Update description (Douglas)
- Warn if "power_to_enable" or "disable_to_power_off" is non-zero and panel->enable_gpio
  is NULL (Douglas)

Changes in v6:
- Update warning message to make it more meaningful. (Douglas)

 drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 26555ec..86e5a45 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -133,6 +133,22 @@ struct panel_desc {
 		unsigned int prepare_to_enable;
 
 		/**
+		 * @delay.power_to_enable: Time for the power to enable the display on.
+		 *
+		 * The time (in milliseconds) to wait after powering up the display
+		 * before asserting its enable pin.
+		 */
+		unsigned int power_to_enable;
+
+		/**
+		 * @delay.disable_to_power_off: Time for the disable to power the display off.
+		 *
+		 * The time (in milliseconds) to wait before powering off the display
+		 * after deasserting its enable pin.
+		 */
+		unsigned int disable_to_power_off;
+
+		/**
 		 * @delay.enable: Time for the panel to display a valid frame.
 		 *
 		 * The time (in milliseconds) that it takes for the panel to
@@ -347,6 +363,10 @@ static int panel_simple_suspend(struct device *dev)
 	struct panel_simple *p = dev_get_drvdata(dev);
 
 	gpiod_set_value_cansleep(p->enable_gpio, 0);
+
+	if (p->desc->delay.disable_to_power_off)
+		msleep(p->desc->delay.disable_to_power_off);
+
 	regulator_disable(p->supply);
 	p->unprepared_time = ktime_get();
 
@@ -407,6 +427,9 @@ static int panel_simple_prepare_once(struct panel_simple *p)
 		return err;
 	}
 
+	if (p->desc->delay.power_to_enable)
+		msleep(p->desc->delay.power_to_enable);
+
 	gpiod_set_value_cansleep(p->enable_gpio, 1);
 
 	delay = p->desc->delay.prepare;
@@ -782,6 +805,11 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc,
 		break;
 	}
 
+	if (!panel->enable_gpio && desc->delay.disable_to_power_off)
+		dev_warn(dev, "Need a delay after disabling panel GPIO, but a GPIO wasn't provided\n");
+	if (!panel->enable_gpio && desc->delay.power_to_enable)
+		dev_warn(dev, "Need a delay before enabling panel GPIO, but a GPIO wasn't provided\n");
+
 	dev_set_drvdata(dev, panel);
 
 	/*
-- 
2.7.4