The patch ("dt-bindings: drm: Introduce the DP AUX bus") talks about how using the DP AUX bus is better than learning how to slice bread. Let's add it to the ti-sn65dsi86 bindings. Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- (no changes since v9) Changes in v9: - Use an absolute path to refer to aux-bus schema. Changes in v8: - ti-sn65dsi86 references the new aux bus bindings. Changes in v7: - ti-sn65dsi86: Add aux-bus child patch new for v7. .../bindings/display/bridge/ti,sn65dsi86.yaml | 20 ++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml index 26932d2e86ab..12b876a20574 100644 --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml @@ -70,6 +70,9 @@ properties: const: 1 description: See ../../pwm/pwm.yaml for description of the cell formats. + aux-bus: + $ref: /schemas/display/dp-aux-bus.yaml# + ports: $ref: /schemas/graph.yaml#/properties/ports @@ -201,11 +204,26 @@ examples: port@1 { reg = <1>; - endpoint { + sn65dsi86_out: endpoint { remote-endpoint = <&panel_in_edp>; }; }; }; + + aux-bus { + panel { + compatible = "boe,nv133fhm-n62"; + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; }; }; - | -- 2.32.0.272.g935e593368-goog