Re: [PATCH 10/11] drm/ingenic: Add doublescan feature

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 28, 2021 at 12:22:05AM +0100, Paul Cercueil wrote:
> A lot of devices with an Ingenic SoC have a weird LCD panel attached,
> where the pixels are not square. For instance, the AUO A030JTN01 and
> Innolux EJ030NA panels have a resolution of 320x480 with a 4:3 aspect
> ratio.
> 
> All userspace applications are built with the assumption that the
> pixels are square. To be able to support these devices without too
> much effort, add a doublescan feature, which allows the f0 and f1
> planes to be used with only half of the screen's vertical resolution,
> where each line of the input is displayed twice.
> 
> This is done using a chained list of DMA descriptors, one descriptor
> per output line.
> 
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 93 +++++++++++++++++++++--
>  1 file changed, 87 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> index 2761478b16e8..01d8490393d1 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> @@ -66,6 +66,8 @@ struct jz_soc_info {
>  
>  struct ingenic_gem_object {
>  	struct drm_gem_cma_object base;
> +	struct ingenic_dma_hwdesc *hwdescs;
> +	dma_addr_t hwdescs_phys;
>  };
>  
>  struct ingenic_drm_private_state {
> @@ -73,6 +75,23 @@ struct ingenic_drm_private_state {
>  
>  	bool no_vblank;
>  	bool use_palette;
> +
> +	/*
> +	 * A lot of devices with an Ingenic SoC have a weird LCD panel attached,
> +	 * where the pixels are not square. For instance, the AUO A030JTN01 and
> +	 * Innolux EJ030NA panels have a resolution of 320x480 with a 4:3 aspect
> +	 * ratio.
> +	 *
> +	 * All userspace applications are built with the assumption that the
> +	 * pixels are square. To be able to support these devices without too
> +	 * much effort, add a doublescan feature, which allows the f0 and f1
> +	 * planes to be used with only half of the screen's vertical resolution,
> +	 * where each line of the input is displayed twice.
> +	 *
> +	 * This is done using a chained list of DMA descriptors, one descriptor
> +	 * per output line.
> +	 */
> +	bool doublescan;
>  };
>  
>  struct ingenic_drm {
> @@ -465,7 +484,7 @@ static int ingenic_drm_plane_atomic_check(struct drm_plane *plane,
>  		return PTR_ERR(priv_state);
>  
>  	ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state,
> -						  DRM_PLANE_HELPER_NO_SCALING,
> +						  0x8000,
>  						  DRM_PLANE_HELPER_NO_SCALING,
>  						  priv->soc_info->has_osd,
>  						  true);
> @@ -482,6 +501,17 @@ static int ingenic_drm_plane_atomic_check(struct drm_plane *plane,
>  	     (new_plane_state->src_h >> 16) != new_plane_state->crtc_h))
>  		return -EINVAL;
>  
> +	/* Enable doublescan if the CRTC_H is twice the SRC_H. */
> +	priv_state->doublescan = (new_plane_state->src_h >> 16) * 2 == new_plane_state->crtc_h;
> +
> +	/* Otherwise, fail if CRTC_H != SRC_H */
> +	if (!priv_state->doublescan && (new_plane_state->src_h >> 16) != new_plane_state->crtc_h)
> +		return -EINVAL;
> +
> +	/* Fail if CRTC_W != SRC_W */
> +	if ((new_plane_state->src_w >> 16) != new_plane_state->crtc_w)
> +		return -EINVAL;
> +
>  	priv_state->use_palette = new_plane_state->fb &&
>  		new_plane_state->fb->format->format == DRM_FORMAT_C8;
>  
> @@ -647,7 +677,9 @@ static void ingenic_drm_plane_atomic_update(struct drm_plane *plane,
>  	struct ingenic_drm_private_state *priv_state;
>  	struct drm_crtc_state *crtc_state;
>  	struct ingenic_dma_hwdesc *hwdesc;
> -	unsigned int width, height, cpp;
> +	unsigned int width, height, cpp, i;
> +	struct drm_gem_object *gem_obj;
> +	struct ingenic_gem_object *obj;
>  	dma_addr_t addr, next_addr;
>  	bool use_f1;
>  	u32 fourcc;
> @@ -664,17 +696,39 @@ static void ingenic_drm_plane_atomic_update(struct drm_plane *plane,
>  		height = newstate->src_h >> 16;
>  		cpp = newstate->fb->format->cpp[0];
>  
> +		gem_obj = drm_gem_fb_get_obj(newstate->fb, 0);
> +		obj = to_ingenic_gem_obj(gem_obj);
> +
>  		priv_state = ingenic_drm_get_new_priv_state(priv, state);
>  		if (priv_state && priv_state->use_palette)
>  			next_addr = dma_hwdesc_pal_addr(priv);
>  		else
>  			next_addr = dma_hwdesc_addr(priv, use_f1);
>  
> -		hwdesc = &priv->dma_hwdescs->hwdesc[use_f1];
> +		if (priv_state->doublescan) {
> +			hwdesc = &obj->hwdescs[0];
> +			/*
> +			 * Use one DMA descriptor per output line, and display
> +			 * each input line twice.
> +			 */
> +			for (i = 0; i < newstate->crtc_h; i++) {
> +				hwdesc[i].next = obj->hwdescs_phys
> +					+ (i + 1) * sizeof(*hwdesc);
> +				hwdesc[i].addr = addr + (i / 2) * newstate->fb->pitches[0];
> +				hwdesc[i].cmd = newstate->fb->pitches[0] / 4;
> +			}
>  
> -		hwdesc->addr = addr;
> -		hwdesc->cmd = JZ_LCD_CMD_EOF_IRQ | (width * height * cpp / 4);
> -		hwdesc->next = next_addr;
> +			/* We want the EOF IRQ only on the very last transfer */
> +			hwdesc[newstate->crtc_h - 1].cmd |= JZ_LCD_CMD_EOF_IRQ;
> +			hwdesc[newstate->crtc_h - 1].next = next_addr;
> +			priv->dma_hwdescs->hwdesc[use_f1] = *hwdesc;
> +		} else {
> +			/* Use one DMA descriptor for the whole frame. */
> +			hwdesc = &priv->dma_hwdescs->hwdesc[use_f1];
> +			hwdesc->addr = addr;
> +			hwdesc->cmd = JZ_LCD_CMD_EOF_IRQ | (width * height * cpp / 4);
> +			hwdesc->next = next_addr;
> +		}
>  
>  		if (drm_atomic_crtc_needs_modeset(crtc_state)) {
>  			fourcc = newstate->fb->format->format;
> @@ -848,6 +902,13 @@ static void ingenic_drm_disable_vblank(struct drm_crtc *crtc)
>  
>  static void ingenic_drm_gem_fb_destroy(struct drm_framebuffer *fb)
>  {
> +	struct ingenic_drm *priv = drm_device_get_priv(fb->dev);
> +	struct drm_gem_object *gem_obj = drm_gem_fb_get_obj(fb, 0);
> +	struct ingenic_gem_object *obj = to_ingenic_gem_obj(gem_obj);
> +
> +	dma_free_coherent(priv->dev,
> +			  sizeof(*obj->hwdescs) * fb->height,
> +			  obj->hwdescs, obj->hwdescs_phys);

You can have multiple fb pointing at the same gem bo. I think with that
this blows up pretty badly.

I think right call is to just move the doublescan mapping to the fb object
entirely, and not have a subclassed gem bo. Userspace shouldn't recreate
fb objects just for fun, so caching at the gem bo level shouldn't be
needed. But if you do need it then you need to refcount it so multiple fb
objects all work out (and they can have different modes even used for
them).

Another option is attaching this to the drm_plane state and setting it up
in prepare_plane/cleanup_plane. But then you probably need some caching at
the obj level (but a simple single slot/last hit cache should be good
enough here). I think this would be the cleanest since doing very
expensive things attached to fb might cause issues, userspace can
create/destroy quite a few of them as part of atomic_test (which skips the
prepare/cleanup_plane part). So this would be the right option if setting
up this dma mapping for doublescan is a more expensive thing to do.
-Daniel

>  	drm_gem_fb_destroy(fb);
>  }
>  
> @@ -868,6 +929,8 @@ ingenic_drm_gem_fb_create(struct drm_device *drm, struct drm_file *file,
>  {
>  	struct ingenic_drm *priv = drm_device_get_priv(drm);
>  	const struct drm_framebuffer_funcs *fb_funcs;
> +	struct drm_gem_object *gem_obj;
> +	struct ingenic_gem_object *obj;
>  	struct drm_framebuffer *fb;
>  
>  	if (priv->soc_info->map_noncoherent)
> @@ -876,6 +939,24 @@ ingenic_drm_gem_fb_create(struct drm_device *drm, struct drm_file *file,
>  		fb_funcs = &ingenic_drm_gem_fb_funcs;
>  
>  	fb = drm_gem_fb_create_with_funcs(drm, file, mode_cmd, fb_funcs);
> +	if (IS_ERR(fb))
> +		return fb;
> +
> +	gem_obj = drm_gem_fb_get_obj(fb, 0);
> +	obj = to_ingenic_gem_obj(gem_obj);
> +
> +	/*
> +	 * Create (fb->height * 2) DMA descriptors, in case we want to use the
> +	 * doublescan feature.
> +	 */
> +	obj->hwdescs = dma_alloc_coherent(priv->dev,
> +					  sizeof(*obj->hwdescs) * fb->height * 2,
> +					  &obj->hwdescs_phys,
> +					  GFP_KERNEL);
> +	if (!obj->hwdescs) {
> +		drm_gem_fb_destroy(fb);
> +		return ERR_PTR(-ENOMEM);
> +	}
>  
>  	return fb;
>  }
> -- 
> 2.30.2
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux