Re: [PATCH 1/2] drm/ttm: cleanup and add TTM_PL_FLAG_TEMPORARY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 31.05.21 um 13:19 schrieb Thomas Hellström (Intel):

On 5/31/21 12:56 PM, Christian König wrote:
Am 31.05.21 um 12:46 schrieb Thomas Hellström (Intel):

On 5/31/21 12:32 PM, Christian König wrote:
Am 31.05.21 um 11:52 schrieb Thomas Hellström (Intel):
Hi, Lang,

On 5/31/21 10:19 AM, Yu, Lang wrote:
[Public]

Hi,
On 5/27/21 3:30 AM, Lang Yu wrote:
Make TTM_PL_FLAG_* start from zero and add
TTM_PL_FLAG_TEMPORARY flag for temporary
GTT allocation use.
GTT is a driver private acronym, right? And it doesn't look like
TTM_PL_FLAG_TEMPORARY will be used in core TTM, so should we instead set
aside a mask in the PL flag for driver-private use?
Hi Thomas,

Thanks for your comments and advice, GTT means Graphics Translation Table here, seems a general acronym. TTM_PL_FLAG_TEMPORARY may also be used by other drives.
I have made other patches for this. Please help review.

Regards,
Lang

My point was really that the flag naming and documentation should reflect what core ttm is doing with that flag. If there is no specific core TTM usage, IMO we should move it to a driver specific flag to avoid future confusion. In particular a writer of a generic TTM resource manager should be able to know without looking at an old commit message what the placement flag is intended for.

So here we add a flag where core TTM forces a bo move on validate and that's it. And that appears to be how it's used when an amdgpu bo is evicted to GTT, (btw should it be accounted in this situation?)

The other use is to force the amdgpu driver to temporarily accept it into GTT when there is a lack of space, and IMHO that's a driver specific use and we should allocate a mask for driver specific flags for that.

So shouldn't this be two flags, really?

Well one flag makes sense for the use case at hand that drivers want to signal to TTM that an allocation is only temporary and not considered valid.

That we then use this flag to implement temporary GTT allocations to avoid problems during eviction is just extending that use case.

OK, but it looked like there were actually two use-cases. One for possibly long-term VRAM evictions to GTT, the other for the temporary use-case where the hop resource allocations sometimes failed. Or did I misunderstand the code?

Ok sounds like we need more documentation here. That's really one use case.

Key point is we need temporary allocation during multihop which should be handled differently to normal allocations.

Yes, that part is clear from the patches. The part that I can't fit into that pattern is why the evict flags when evicting from visible VRAM to GTT or ordinary VRAM is marked with TTM_PL_FLAG_TEMPORARY. Wouldn't those remain evicted in that placement until re-validated to visible VRAM at an unknown future time?

Not necessarily.

The situation we ran into was the following:
1. OOM on VRAM, we try to evict.

2. GTT space is used up as well, ok evict directly to SYSTEM.

3. For VRAM->SYSTEM eviction we use a temporary bounce buffer.

4. Waiting for the bounce buffer to become idle is interrupted by a signal so BO is still backed by bounce buffer.

5. Next CS, BO is validated with VRAM|GTT. TTM sees that it is in GTT and doesn't move the buffer.

6. CS goes into nirvana because bounce buffers are not meant to be used for CS (we can ignore alignment and accounting for them).



Patch 3/3:

             amdgpu_bo_placement_from_domain(abo, AMDGPU_GEM_DOMAIN_GTT);
            abo->placements[0].flags |= TTM_PL_FLAG_TEMPORARY;

Thanks for pointing that out, this is indeed still the wrong place. Going to fix that.

Christian.





Christian.


/Thomas


Christian.


TTM_PL_FLAG_FORCE_MOVE

and

AMDGPU_PL_FLAG_TEMPORARY

Thanks,

/Thomas

Thomas
-----Original Message-----
From: Yu, Lang <Lang.Yu@xxxxxxx>
Sent: Thursday, May 27, 2021 9:31 AM
To: amd-gfx@xxxxxxxxxxxxxxxxxxxxx; dri-devel@xxxxxxxxxxxxxxxxxxxxx
Cc: Koenig, Christian <Christian.Koenig@xxxxxxx>; Huang, Ray
<Ray.Huang@xxxxxxx>; Deucher, Alexander <Alexander.Deucher@xxxxxxx>;
Yu, Lang <Lang.Yu@xxxxxxx>
Subject: [PATCH 1/2] drm/ttm: cleanup and add TTM_PL_FLAG_TEMPORARY

Make TTM_PL_FLAG_* start from zero and add TTM_PL_FLAG_TEMPORARY flag
for temporary GTT allocation use.

Signed-off-by: Lang Yu <Lang.Yu@xxxxxxx>
---
include/drm/ttm/ttm_placement.h | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/include/drm/ttm/ttm_placement.h
b/include/drm/ttm/ttm_placement.h index aa6ba4d0cf78..9f5cfc7c2d5a 100644
--- a/include/drm/ttm/ttm_placement.h
+++ b/include/drm/ttm/ttm_placement.h
@@ -47,8 +47,9 @@
  * top of the memory area, instead of the bottom.
  */

-#define TTM_PL_FLAG_CONTIGUOUS  (1 << 19)
-#define TTM_PL_FLAG_TOPDOWN     (1 << 22)
+#define TTM_PL_FLAG_CONTIGUOUS  (1 << 0)
+#define TTM_PL_FLAG_TOPDOWN     (1 << 1)
+#define TTM_PL_FLAG_TEMPORARY   (1 << 2)

/**
  * struct ttm_place
--
2.25.1
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.freedesktop.org%2Fmailman%2Flistinfo%2Famd-gfx&amp;data=04%7C01%7Cchristian.koenig%40amd.com%7C124823f58ee741684d6a08d924260567%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637580568009117976%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=d8k0c8SAcGGp1m4mEmA8nDrM%2FH6b5Mwo9u%2BzR9jiw3A%3D&amp;reserved=0




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux