Re: [PATCH 7/7] drm/msm: Migrate to aggregate driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 20, 2021 at 12:58 PM Daniel Vetter <daniel@xxxxxxxx> wrote:
>
> On Wed, May 19, 2021 at 05:25:19PM -0700, Stephen Boyd wrote:
> > The device lists are poorly ordered when the component device code is
> > used. This is because component_master_add_with_match() returns 0
> > regardless of component devices calling component_add() first. It can
> > really only fail if an allocation fails, in which case everything is
> > going bad and we're out of memory. The driver that registers the
> > aggregate driver, can succeed at probe and put the attached device on
> > the DPM lists before any of the component devices are probed and put on
> > the lists.
> >
> > Within the component device framework this usually isn't that bad
> > because the real driver work is done at bind time via
> > component{,master}_ops::bind(). It becomes a problem when the driver
> > core, or host driver, wants to operate on the component device outside
> > of the bind/unbind functions, e.g. via 'remove' or 'shutdown'. The
> > driver core doesn't understand the relationship between the host device
> > and the component devices and could possibly try to operate on component
> > devices when they're already removed from the system or shut down.
> >
> > Normally, device links or probe defer would reorder the lists and put
> > devices that depend on other devices in the lists at the correct
> > location, but with component devices this doesn't happen because this
> > information isn't expressed anywhere. Drivers simply succeed at
> > registering their component or the aggregate driver with the component
> > framework and wait for their bind() callback to be called once the other
> > components are ready. In summary, the drivers that make up the aggregate
> > driver can probe in any order.
> >
> > This ordering problem becomes fairly obvious when shutting down the
> > device with a DSI controller connected to a DSI bridge that is
> > controlled via i2c. In this case, the msm display driver wants to tear
> > down the display pipeline on shutdown via msm_pdev_shutdown() by calling
> > drm_atomic_helper_shutdown(), and it can't do that unless the whole
> > display chain is still probed and active in the system. When a display
> > bridge is on i2c, the i2c device for the bridge will be created whenever
> > the i2c controller probes, which could be before or after the msm
> > display driver probes. If the i2c controller probes after the display
> > driver, then the i2c controller will be shutdown before the display
> > controller during system wide shutdown and thus i2c transactions will
> > stop working before the display pipeline is shut down. This means we'll
> > have the display bridge trying to access an i2c bus that's shut down
> > because drm_atomic_helper_shutdown() is trying to disable the bridge
> > after the bridge is off.
> >
> > The solution is to make the aggregate driver into a real struct driver
> > that is bound to a device when the other component devices have all
> > probed. Now that the component driver code is a proper bus, we can
> > simply register an aggregate driver with that bus via
> > component_aggregate_register() and then attach the shutdown hook to that
> > driver to be sure that the shutdown for the display pipeline is called
> > before any of the component device driver shutdown hooks are called.
> >
> > Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
> > Cc: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
> > Cc: Rob Clark <robdclark@xxxxxxxxx>
> > Cc: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
> > Cc: Saravana Kannan <saravanak@xxxxxxxxxx>
> > Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> > ---
> >
> > As stated in the cover letter, this isn't perfect but it still works. I
> > get a warning from runtime PM that the parent device (e00000.mdss) is
> > not runtime PM enabled but the child device (the aggregate device) is
> > being enabled by the bus logic. I need to move around the place that the
> > parent device is runtime PM enabled and probably keep it powered up
> > during the entire time that the driver is probed until the aggregate
> > driver probes.
> >
> >  drivers/gpu/drm/msm/msm_drv.c | 47 +++++++++++++++++++----------------
> >  1 file changed, 26 insertions(+), 21 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
> > index e1104d2454e2..0c64e6a2ce25 100644
> > --- a/drivers/gpu/drm/msm/msm_drv.c
> > +++ b/drivers/gpu/drm/msm/msm_drv.c
> > @@ -1265,19 +1265,35 @@ static int add_gpu_components(struct device *dev,
> >       return 0;
> >  }
> >
> > -static int msm_drm_bind(struct device *dev)
> > +static int msm_drm_bind(struct aggregate_device *adev)
> >  {
> > -     return msm_drm_init(dev, &msm_driver);
> > +     return msm_drm_init(adev->dev.parent, &msm_driver);
> >  }
> >
> > -static void msm_drm_unbind(struct device *dev)
> > +static void msm_drm_unbind(struct aggregate_device *adev)
> >  {
> > -     msm_drm_uninit(dev);
> > +     msm_drm_uninit(adev->dev.parent);
> > +}
> > +
> > +static void msm_drm_shutdown(struct aggregate_device *adev)
> > +{
> > +     struct drm_device *drm = platform_get_drvdata(to_platform_device(adev->dev.parent));
> > +     struct msm_drm_private *priv = drm ? drm->dev_private : NULL;
> > +
> > +     if (!priv || !priv->kms)
> > +             return;
> > +
> > +     drm_atomic_helper_shutdown(drm);
> >  }
> >
> > -static const struct component_master_ops msm_drm_ops = {
> > -     .bind = msm_drm_bind,
> > -     .unbind = msm_drm_unbind,
> > +static struct aggregate_driver msm_drm_aggregate_driver = {
> > +     .probe = msm_drm_bind,
> > +     .remove = msm_drm_unbind,
> > +     .shutdown = msm_drm_shutdown,
> > +     .driver = {
> > +             .name   = "msm_drm",
> > +             .owner  = THIS_MODULE,
> > +     },
> >  };
> >
> >  /*
> > @@ -1306,7 +1322,8 @@ static int msm_pdev_probe(struct platform_device *pdev)
> >       if (ret)
> >               goto fail;
> >
> > -     ret = component_master_add_with_match(&pdev->dev, &msm_drm_ops, match);
> > +     msm_drm_aggregate_driver.match = match;
>
> This is a bit awkward design, because it means the driver struct can't be
> made const, and it will blow up when you have multiple instance of the
> same driver. I think the match should stay as part of the register
> function call, and be stored in the aggregate_device struct somewhere.
>
> Otherwise I think this looks really solid and fixes your issue properly.
> Obviously needs careful review from Greg KH for the device model side of
> things, and from Rafael Wysocki for pm side.
>
> Bunch of thoughts from a very cursory reading:
>
> - I think it'd be good if we pass the aggregate_device to all components
>   when we bind them, plus the void * parameter just to make this less
>   disruptive. Even more device model goodies.
>
> - Maybe splatter a pile of sysfs links around so that this all becomes
>   visible? Could be interesting for debugging ordering issues. Just an
>   idea, feel free to entirely ignore.

Device links give this for free too! You can check what components
make up a device and their state too.

-Saravana

>
> - Needs solid kerneldoc for everything exposed to drivers and good
>   overview DOC:
>
> - Needs deprecation warnings in the kerneldoc for all the
>   component_master_* and if feasible with a mechanical conversion,
>   converting existing users. I'd like to not be stuck with the old model
>   forever, plus this will give a pile more people to review this code
>   here.
>
> Anyway the name changes in probe and remove hooks below are already worth
> this on their own imo. That's why I'd like to see them in all drivers.
>
> Cheers, Daniel
>
> > +     ret = component_aggregate_register(&pdev->dev, &msm_drm_aggregate_driver);
> >       if (ret)
> >               goto fail;
> >
> > @@ -1319,23 +1336,12 @@ static int msm_pdev_probe(struct platform_device *pdev)
> >
> >  static int msm_pdev_remove(struct platform_device *pdev)
> >  {
> > -     component_master_del(&pdev->dev, &msm_drm_ops);
> > +     component_aggregate_unregister(&pdev->dev, &msm_drm_aggregate_driver);
> >       of_platform_depopulate(&pdev->dev);
> >
> >       return 0;
> >  }
> >
> > -static void msm_pdev_shutdown(struct platform_device *pdev)
> > -{
> > -     struct drm_device *drm = platform_get_drvdata(pdev);
> > -     struct msm_drm_private *priv = drm ? drm->dev_private : NULL;
> > -
> > -     if (!priv || !priv->kms)
> > -             return;
> > -
> > -     drm_atomic_helper_shutdown(drm);
> > -}
> > -
> >  static const struct of_device_id dt_match[] = {
> >       { .compatible = "qcom,mdp4", .data = (void *)KMS_MDP4 },
> >       { .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 },
> > @@ -1351,7 +1357,6 @@ MODULE_DEVICE_TABLE(of, dt_match);
> >  static struct platform_driver msm_platform_driver = {
> >       .probe      = msm_pdev_probe,
> >       .remove     = msm_pdev_remove,
> > -     .shutdown   = msm_pdev_shutdown,
> >       .driver     = {
> >               .name   = "msm",
> >               .of_match_table = dt_match,
> > --
> > https://chromeos.dev
> >
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux