Add Innolux G070Y2-T02 panel to the Protonic VT7 board. Signed-off-by: Robin van der Gracht <robin@xxxxxxxxxxx> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> --- arch/arm/boot/dts/imx6dl-prtvt7.dts | 47 +++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts index ae6da241f13e..156a5c5c0dc1 100644 --- a/arch/arm/boot/dts/imx6dl-prtvt7.dts +++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts @@ -31,6 +31,30 @@ backlight_lcd: backlight-lcd { enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; }; + display { + compatible = "fsl,imx-parallel-display"; + pinctrl-0 = <&pinctrl_ipu1_disp>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + keys { compatible = "gpio-keys"; autorepeat; @@ -138,6 +162,18 @@ led-debug0 { }; }; + panel { + compatible = "innolux,g070y2-t02"; + backlight = <&backlight_lcd>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + reg_bl_12v0: regulator-bl-12v0 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -156,6 +192,13 @@ reg_1v8: regulator-1v8 { regulator-max-microvolt = <1800000>; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "prti6q-sgtl5000"; @@ -260,6 +303,10 @@ &ipu1 { status = "okay"; }; +&ipu1_di0_disp0 { + remote-endpoint = <&display_in>; +}; + &pwm1 { #pwm-cells = <2>; pinctrl-names = "default"; -- 2.29.2