Decoder input LVDS format is a property of the decoder chip or even
its strapping. Handle data-mapping the same way lvds-panel does. In
case data-mapping is not present, do nothing, since there are still
legacy bindings which do not specify this property.
Signed-off-by: Marek Vasut <marex@xxxxxxx>
Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
To: dri-devel@xxxxxxxxxxxxxxxxxxxxx
---
drivers/gpu/drm/bridge/lvds-codec.c | 50 +++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/drivers/gpu/drm/bridge/lvds-codec.c b/drivers/gpu/drm/bridge/lvds-codec.c
index 8a7cb267ab14..33f992d52902 100644
--- a/drivers/gpu/drm/bridge/lvds-codec.c
+++ b/drivers/gpu/drm/bridge/lvds-codec.c
@@ -23,6 +23,7 @@ struct lvds_codec {
struct regulator *vcc;
struct gpio_desc *powerdown_gpio;
u32 connector_type;
+ unsigned int bus_format;
};
static inline struct lvds_codec *to_lvds_codec(struct drm_bridge *bridge)
@@ -69,10 +70,33 @@ static void lvds_codec_disable(struct drm_bridge *bridge)
"Failed to disable regulator \"vcc\": %d\n", ret);
}
+static bool lvds_codec_mode_fixup(struct drm_bridge *bridge,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adj)
+{
+ struct lvds_codec *lvds_codec = to_lvds_codec(bridge);
+ struct drm_encoder *encoder = bridge->encoder;
+ struct drm_device *ddev = encoder->dev;
+ struct drm_connector *connector;
+
+ /* If 'data-mapping' was not specified, do nothing. */
+ if (!lvds_codec->bus_format)
+ return true;
+
+ /* Patch in the LVDS format */
+ list_for_each_entry(connector, &ddev->mode_config.connector_list, head) {
+ drm_display_info_set_bus_formats(&connector->display_info,
+ &lvds_codec->bus_format, 1);
+ }
+
+ return true;
+}
+
static const struct drm_bridge_funcs funcs = {
.attach = lvds_codec_attach,
.enable = lvds_codec_enable,
.disable = lvds_codec_disable,
+ .mode_fixup = lvds_codec_mode_fixup,
};
static int lvds_codec_probe(struct platform_device *pdev)
@@ -81,6 +105,7 @@ static int lvds_codec_probe(struct platform_device *pdev)
struct device_node *panel_node;
struct drm_panel *panel;
struct lvds_codec *lvds_codec;
+ const char *mapping;
u32 val;
lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL);
@@ -133,6 +158,31 @@ static int lvds_codec_probe(struct platform_device *pdev)
DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE;
}
+ /*
+ * Decoder input LVDS format is a property of the decoder chip or even
+ * its strapping. Handle data-mapping the same way lvds-panel does. In
+ * case data-mapping is not present, do nothing, since there are still
+ * legacy bindings which do not specify this property.
+ */
+ if (lvds_codec->connector_type != DRM_MODE_CONNECTOR_LVDS) {
+ ret = of_property_read_string(dev->of_node, "data-mapping",
+ &mapping);
+ if (ret < 0) {
+ dev_err(dev, "missing 'data-mapping' DT property\n");
+ } else {
+ if (!strcmp(mapping, "jeida-18")) {
+ lvds_codec->bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG;
+ } else if (!strcmp(mapping, "jeida-24")) {
+ lvds_codec->bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA;
+ } else if (!strcmp(mapping, "vesa-24")) {
+ lvds_codec->bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG;
+ } else {
+ dev_err(dev, "invalid 'data-mapping' DT property\n");
+ return -EINVAL;
+ }
+ }
+ }
+
/*
* The panel_bridge bridge is attached to the panel's of_node,
* but we need a bridge attached to our of_node for our user
--
2.30.2
