Re: [PATCH v1 0/3] Add support for next gen eDP driver on SnapDragon

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Wed, 5 May 2021 at 11:17, Sankeerth Billakanti
<sbillaka@xxxxxxxxxxxxxx> wrote:
>
> These patches add support for the next generation eDP driver on SnapDragon
> with dpu support. The existing eDP driver cannot support the new eDP
> hardware. So, to maintain backward compatibility, the older eDP driver is
> moved to v200 folder and the new generation eDP driver is added in
> the v510 folder.

What exactly does this version correspond to?
I assume that v510 corresponds to sdmshrike/sc8180x. Is it right?
Is it really so specific, or just v2/v5 would be enough? Not to
mention that this is the MDP/ version, while other blocks tend to use
block-specific versions/ids.

Also, how much does it differ from the current DP core supported via
drivers/gpu/drm/msm/dp ?

First two patches did not make it to the linux-msm, so I can not
comment on each of the lines.
However just my few cents (other reviewers might disagree though):

- I see little benefit in renaming the folders just for the sake of
renaming. You can put your code in drivers/gpu/drm/msm/edp-v510, if
you really insist on that. Note that for all other (even incompatible)
hardware types we still use single level of folders.

- Also I see that significant parts of code (e.g. AUX, bridge,
connector, maybe more) are just c&p of old edp code pieces. Please
share the code instead of duplicating it.

- Please consider updating register definitions in xml form and then
providing both changed xml files (to mesa project (?)) and generated
headers into the kernel.

- Please consider using clk_bulk_* functions instead of using
dss_module_power. I'm going to send a patchset reworking current users
to use the generic clk_bulk_* function family.

- In generic, this eDP clock handling seems to match closely DP clocks
handling (with all the name comparison, etc). Consider moving this to
a generic piece of code

- PHY seems to be a version of QMP PHY. Please use it, like it was
done for the DP itself. There is support for combined USB+DP PHYs
(both v3 and v4), so it should be possible to extend that for eDP.


> These are baseline changes with which we can enable display. The new eDP
> controller can also support additional features such as backlight control,
> PSR etc. which will be enabled in subsequent patch series.
>
> Summary of changes:
> DPU driver interface to the new eDP v510 display driver.
> New generation eDP controller and phy driver implementation.
> A common interface to choose enable the required eDP driver.
>
> Sankeerth Billakanti (3):
>   drm/msm/edp: support multiple generations of edp hardware
>   drm/msm/edp: add support for next gen edp
>   drm/msm/disp/dpu1: add support for edp encoder
>
>  drivers/gpu/drm/msm/Makefile                      |   19 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c       |    7 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c           |   33 +
>  drivers/gpu/drm/msm/edp/edp.c                     |  198 ---
>  drivers/gpu/drm/msm/edp/edp.h                     |   78 -
>  drivers/gpu/drm/msm/edp/edp.xml.h                 |  380 -----
>  drivers/gpu/drm/msm/edp/edp_aux.c                 |  264 ----
>  drivers/gpu/drm/msm/edp/edp_bridge.c              |  111 --
>  drivers/gpu/drm/msm/edp/edp_common.c              |   38 +
>  drivers/gpu/drm/msm/edp/edp_common.h              |   47 +
>  drivers/gpu/drm/msm/edp/edp_connector.c           |  132 --
>  drivers/gpu/drm/msm/edp/edp_ctrl.c                | 1375 ------------------
>  drivers/gpu/drm/msm/edp/edp_phy.c                 |   98 --
>  drivers/gpu/drm/msm/edp/v200/edp.xml.h            |  380 +++++
>  drivers/gpu/drm/msm/edp/v200/edp_v200.c           |  210 +++
>  drivers/gpu/drm/msm/edp/v200/edp_v200.h           |   70 +
>  drivers/gpu/drm/msm/edp/v200/edp_v200_aux.c       |  264 ++++
>  drivers/gpu/drm/msm/edp/v200/edp_v200_bridge.c    |  111 ++
>  drivers/gpu/drm/msm/edp/v200/edp_v200_connector.c |  132 ++
>  drivers/gpu/drm/msm/edp/v200/edp_v200_ctrl.c      | 1375 ++++++++++++++++++
>  drivers/gpu/drm/msm/edp/v200/edp_v200_phy.c       |   98 ++
>  drivers/gpu/drm/msm/edp/v510/edp_v510.c           |  220 +++
>  drivers/gpu/drm/msm/edp/v510/edp_v510.h           |  151 ++
>  drivers/gpu/drm/msm/edp/v510/edp_v510_aux.c       |  268 ++++
>  drivers/gpu/drm/msm/edp/v510/edp_v510_bridge.c    |  111 ++
>  drivers/gpu/drm/msm/edp/v510/edp_v510_connector.c |  117 ++
>  drivers/gpu/drm/msm/edp/v510/edp_v510_ctrl.c      | 1583 +++++++++++++++++++++
>  drivers/gpu/drm/msm/edp/v510/edp_v510_phy.c       |  641 +++++++++
>  drivers/gpu/drm/msm/edp/v510/edp_v510_reg.h       |  339 +++++
>  29 files changed, 6207 insertions(+), 2643 deletions(-)
>  delete mode 100644 drivers/gpu/drm/msm/edp/edp.c
>  delete mode 100644 drivers/gpu/drm/msm/edp/edp.h
>  delete mode 100644 drivers/gpu/drm/msm/edp/edp.xml.h
>  delete mode 100644 drivers/gpu/drm/msm/edp/edp_aux.c
>  delete mode 100644 drivers/gpu/drm/msm/edp/edp_bridge.c
>  create mode 100644 drivers/gpu/drm/msm/edp/edp_common.c
>  create mode 100644 drivers/gpu/drm/msm/edp/edp_common.h
>  delete mode 100644 drivers/gpu/drm/msm/edp/edp_connector.c
>  delete mode 100644 drivers/gpu/drm/msm/edp/edp_ctrl.c
>  delete mode 100644 drivers/gpu/drm/msm/edp/edp_phy.c
>  create mode 100644 drivers/gpu/drm/msm/edp/v200/edp.xml.h
>  create mode 100644 drivers/gpu/drm/msm/edp/v200/edp_v200.c
>  create mode 100644 drivers/gpu/drm/msm/edp/v200/edp_v200.h
>  create mode 100644 drivers/gpu/drm/msm/edp/v200/edp_v200_aux.c
>  create mode 100644 drivers/gpu/drm/msm/edp/v200/edp_v200_bridge.c
>  create mode 100644 drivers/gpu/drm/msm/edp/v200/edp_v200_connector.c
>  create mode 100644 drivers/gpu/drm/msm/edp/v200/edp_v200_ctrl.c
>  create mode 100644 drivers/gpu/drm/msm/edp/v200/edp_v200_phy.c
>  create mode 100644 drivers/gpu/drm/msm/edp/v510/edp_v510.c
>  create mode 100644 drivers/gpu/drm/msm/edp/v510/edp_v510.h
>  create mode 100644 drivers/gpu/drm/msm/edp/v510/edp_v510_aux.c
>  create mode 100644 drivers/gpu/drm/msm/edp/v510/edp_v510_bridge.c
>  create mode 100644 drivers/gpu/drm/msm/edp/v510/edp_v510_connector.c
>  create mode 100644 drivers/gpu/drm/msm/edp/v510/edp_v510_ctrl.c
>  create mode 100644 drivers/gpu/drm/msm/edp/v510/edp_v510_phy.c
>  create mode 100644 drivers/gpu/drm/msm/edp/v510/edp_v510_reg.h
>
> --
> The Qualcomm Innovatin Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
>


--
With best wishes
Dmitry
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux