On Wed, Apr 28, 2021 at 5:21 PM Alex Deucher <alexdeucher@xxxxxxxxx> wrote: > > On Tue, Apr 20, 2021 at 5:25 PM Alex Deucher <alexdeucher@xxxxxxxxx> wrote: > > > > On Fri, Apr 16, 2021 at 12:29 PM Mario Kleiner > > <mario.kleiner.de@xxxxxxxxx> wrote: > > > > > > Friendly ping to the AMD people. Nicholas, Harry, Alex, any feedback? > > > Would be great to get this in sooner than later. > > > > > > > No objections from me. > > > > I don't have any objections to merging this. Are the IGT tests available? > Any preference on whether I merge this through the AMD tree or drm-misc? Alex > Alex > > > Alex > > > > > > > Thanks and have a nice weekend, > > > -mario > > > > > > On Fri, Mar 19, 2021 at 10:03 PM Mario Kleiner > > > <mario.kleiner.de@xxxxxxxxx> wrote: > > > > > > > > Hi, > > > > > > > > this patch series adds the fourcc's for 16 bit fixed point unorm > > > > framebuffers to the core, and then an implementation for AMD gpu's > > > > with DisplayCore. > > > > > > > > This is intended to allow for pageflipping to, and direct scanout of, > > > > Vulkan swapchain images in the format VK_FORMAT_R16G16B16A16_UNORM. > > > > I have patched AMD's GPUOpen amdvlk OSS driver to enable this format > > > > for swapchains, mapping to DRM_FORMAT_XBGR16161616: > > > > Link: https://github.com/kleinerm/pal/commit/a25d4802074b13a8d5f7edc96ae45469ecbac3c4 > > > > > > > > My main motivation for this is squeezing every bit of precision > > > > out of the hardware for scientific and medical research applications, > > > > where fp16 in the unorm range is limited to ~11 bpc effective linear > > > > precision in the upper half [0.5;1.0] of the unorm range, although > > > > the hardware could do at least 12 bpc. > > > > > > > > It has been successfully tested on AMD RavenRidge (DCN-1), and with > > > > Polaris11 (DCE-11.2). Up to two displays were active on RavenRidge > > > > (DP 2560x1440@144Hz + HDMI 2560x1440@120Hz), the maximum supported > > > > on my hw, both running at 10 bpc DP output depth. > > > > > > > > Up to three displays were active on the Polaris (DP 2560x1440@144Hz + > > > > 2560x1440@100Hz USB-C DP-altMode-to-HDMI converter + eDP 2880x1800@60Hz > > > > Apple Retina panel), all running at 10 bpc output depth. > > > > > > > > No malfunctions, visual artifacts or other oddities were observed > > > > (apart from an adventureous mess of cables and adapters on my desk), > > > > suggesting it works. > > > > > > > > I used my automatic photometer measurement procedure to verify the > > > > effective output precision of 10 bpc DP native signal + spatial > > > > dithering in the gpu as enabled by the amdgpu driver. Results show > > > > the expected 12 bpc precision i hoped for -- the current upper limit > > > > for AMD display hw afaik. > > > > > > > > So it seems to work in the way i hoped :). > > > > > > > > Some open questions wrt. AMD DC, to be addressed in this patch series, or follow up > > > > patches if neccessary: > > > > > > > > - For the atomic check for plane scaling, the current patch will > > > > apply the same hw limits as for other rgb fixed point fb's, e.g., > > > > for 8 bpc rgb8. Is this correct? Or would we need to use the fp16 > > > > limits, because this is also a 64 bpp format? Or something new > > > > entirely? > > > > > > > > - I haven't added the new fourcc to the DCC tables yet. Should i? > > > > > > > > - I had to change an assert for DCE to allow 36bpp linebuffers (patch 4/5). > > > > It looks to me as if that assert was inconsistent with other places > > > > in the driver where COLOR_DEPTH121212 is supported, and looking at > > > > the code, the change seems harmless. At least on DCE-11.2 the change > > > > didn't cause any noticeable (by myself) or measurable (by my equipment) > > > > problems on any of the 3 connected displays. > > > > > > > > - Related to that change, while i needed to increase lb pixelsize to 36bpp > > > > to get > 10 bpc effective precision on DCN, i didn't need to do that > > > > on DCE. Also no change of lb pixelsize was needed on either DCN or DCe > > > > to get > 10 bpc precision for fp16 framebuffers, so something seems to > > > > behave differently for floating point 16 vs. fixed point 16. This all > > > > seems to suggest one could leave lb pixelsize at the old 30 bpp value > > > > on at least DCE-11.2 and still get the > 10 bpc precision if one wanted > > > > to avoid the changes of patch 4/5. > > > > > > > > Thanks, > > > > -mario > > > > > > > > > > > _______________________________________________ > > > dri-devel mailing list > > > dri-devel@xxxxxxxxxxxxxxxxxxxxx > > > https://lists.freedesktop.org/mailman/listinfo/dri-devel _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
