Hello, I get errors about missing symbol in the lontium-lt8912b module. Is the problem self-evident or do you need the config as well? I don't need the driver for anything, it was just auto-enabled because it's new and the change has not been reviewed. Thanks Michal > > Last output: > WRAP arch/powerpc/boot/zImage.maple > WRAP arch/powerpc/boot/zImage.pseries > make[2]: *** Deleting file 'modules-only.symvers' > MODPOST modules-only.symvers > ERROR: modpost: "drm_display_mode_to_videomode" [drivers/gpu/drm/bridge/lontium-lt8912b.ko] undefined! > make[2]: *** [../scripts/Makefile.modpost:150: modules-only.symvers] Error 1 > make[1]: *** [/home/abuild/rpmbuild/BUILD/kernel-vanilla-5.12.0.13670.g5e321ded302d/linux-5.12-13670-g5e321ded302d/Makefile:1770: modules] Error 2 > make: *** [../Makefile:215: __sub-make] Error 2 > error: Bad exit status from /var/tmp/rpm-tmp.q1oSIp (%build) _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
