Re: [RESEND PATCH v6 2/4] backlight: rt4831: Adds DT binding document for Richtek RT4831 backlight

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Rob Herring <robh@xxxxxxxxxx> 於 2021年5月1日 週六 上午4:10寫道:
>
> On Mon, Apr 26, 2021 at 03:18:09PM +0800, cy_huang wrote:
> > From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> >
> > Adds DT binding document for Richtek RT4831 backlight.
> >
> > Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> > Reviewed-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
> > ---
> > Resend this v6 patch series to loop devicetree reviewers.
> >
> > For next, need to add the below line
> > Reviewed-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
> > ---
> >  .../leds/backlight/richtek,rt4831-backlight.yaml   | 65 ++++++++++++++++++++++
> >  include/dt-bindings/leds/rt4831-backlight.h        | 23 ++++++++
> >  2 files changed, 88 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
> >  create mode 100644 include/dt-bindings/leds/rt4831-backlight.h
> >
> > diff --git a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
> > new file mode 100644
> > index 00000000..4da6a66
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
> > @@ -0,0 +1,65 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/leds/backlight/richtek,rt4831-backlight.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Richtek RT4831 Backlight
> > +
> > +maintainers:
> > +  - ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> > +
> > +description: |
> > +  RT4831 is a mutifunctional device that can provide power to the LCD display
> > +  and LCD backlight.
> > +
> > +  For the LCD backlight, it can provide four channel WLED driving capability.
> > +  Each channel driving current is up to 30mA
> > +
> > +  Datasheet is available at
> > +  https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf
> > +
>
> Need to reference common backlight schema:
>
> allOf:
>   - $ref: common.yaml#
>
> > +properties:
> > +  compatible:
> > +    const: richtek,rt4831-backlight
> > +
> > +  default-brightness:
> > +    description: |
> > +      The default brightness that applied to the system on start-up.
> > +    $ref: /schemas/types.yaml#/definitions/uint32
>
> Drop description and $ref. Covered in common.yaml.
>
OK
> > +    minimum: 0
> > +    maximum: 2048
> > +
> > +  max-brightness:
> > +    description: |
> > +      The max brightness for the H/W limit
> > +    $ref: /schemas/types.yaml#/definitions/uint32
>
> And here.
>
OK

The above changes will be merged in next, thanks.
After mfd code patch reviewed, I'll send v7 for all of review comments.
> > +    minimum: 0
> > +    maximum: 2048
> > +
> > +  richtek,pwm-enable:
> > +    description: |
> > +      Specify the backlight dimming following by PWM duty or by SW control.
> > +    type: boolean
> > +
> > +  richtek,bled-ovp-sel:
> > +    description: |
> > +      Backlight OVP level selection, currently support 17V/21V/25V/29V.
> > +    $ref: /schemas/types.yaml#/definitions/uint8
> > +    default: 1
> > +    minimum: 0
> > +    maximum: 3
> > +
> > +  richtek,channel-use:
> > +    description: |
> > +      Backlight LED channel to be used.
> > +      BIT 0/1/2/3 is used to indicate led channel 1/2/3/4 enable or disable.
> > +    $ref: /schemas/types.yaml#/definitions/uint8
> > +    minimum: 1
> > +    maximum: 15
> > +
> > +required:
> > +  - compatible
> > +  - richtek,channel-use
> > +
> > +additionalProperties: false
> > diff --git a/include/dt-bindings/leds/rt4831-backlight.h b/include/dt-bindings/leds/rt4831-backlight.h
> > new file mode 100644
> > index 00000000..125c635
> > --- /dev/null
> > +++ b/include/dt-bindings/leds/rt4831-backlight.h
> > @@ -0,0 +1,23 @@
> > +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> > +/*
> > + * This header provides constants for rt4831 backlight bindings.
> > + *
> > + * Copyright (C) 2020, Richtek Technology Corp.
> > + * Author: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> > + */
> > +
> > +#ifndef _DT_BINDINGS_RT4831_BACKLIGHT_H
> > +#define _DT_BINDINGS_RT4831_BACKLIGHT_H
> > +
> > +#define RT4831_BLOVPLVL_17V  0
> > +#define RT4831_BLOVPLVL_21V  1
> > +#define RT4831_BLOVPLVL_25V  2
> > +#define RT4831_BLOVPLVL_29V  3
> > +
> > +#define RT4831_BLED_CH1EN    (1 << 0)
> > +#define RT4831_BLED_CH2EN    (1 << 1)
> > +#define RT4831_BLED_CH3EN    (1 << 2)
> > +#define RT4831_BLED_CH4EN    (1 << 3)
> > +#define RT4831_BLED_ALLCHEN  ((1 << 4) - 1)
> > +
> > +#endif /* _DT_BINDINGS_RT4831_BACKLIGHT_H */
> > --
> > 2.7.4
> >
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux