[PATCH 4/4] drm/i915/uapi: convert i915_query and friend to kernel doc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add a note about the two-step process.

v2(Tvrtko):
  - Also document the other method of just passing in a buffer which is
    large enough, which avoids two ioctl calls. Can make sense for
    smaller query items.

Suggested-by: Daniel Vetter <daniel@xxxxxxxx>
Signed-off-by: Matthew Auld <matthew.auld@xxxxxxxxx>
Cc: Joonas Lahtinen <joonas.lahtinen@xxxxxxxxxxxxxxx>
Cc: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
Cc: Jordan Justen <jordan.l.justen@xxxxxxxxx>
Cc: Daniel Vetter <daniel.vetter@xxxxxxxxx>
Cc: Kenneth Graunke <kenneth@xxxxxxxxxxxxx>
Cc: Jason Ekstrand <jason@xxxxxxxxxxxxxx>
Cc: Dave Airlie <airlied@xxxxxxxxx>
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
Cc: mesa-dev@xxxxxxxxxxxxxxxxxxxxx
Reviewed-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
---
 include/uapi/drm/i915_drm.h | 61 ++++++++++++++++++++++++++++++-------
 1 file changed, 50 insertions(+), 11 deletions(-)

diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h
index d79b51c12ff2..12f375c52317 100644
--- a/include/uapi/drm/i915_drm.h
+++ b/include/uapi/drm/i915_drm.h
@@ -2218,14 +2218,23 @@ struct drm_i915_perf_oa_config {
 	__u64 flex_regs_ptr;
 };
 
+/**
+ * struct drm_i915_query_item - An individual query for the kernel to process.
+ *
+ * The behaviour is determined by the @query_id. Note that exactly what
+ * @data_ptr is also depends on the specific @query_id.
+ */
 struct drm_i915_query_item {
+	/** @query_id: The id for this query */
 	__u64 query_id;
 #define DRM_I915_QUERY_TOPOLOGY_INFO    1
 #define DRM_I915_QUERY_ENGINE_INFO	2
 #define DRM_I915_QUERY_PERF_CONFIG      3
 /* Must be kept compact -- no holes and well documented */
 
-	/*
+	/**
+	 * @length:
+	 *
 	 * When set to zero by userspace, this is filled with the size of the
 	 * data to be written at the data_ptr pointer. The kernel sets this
 	 * value to a negative value to signal an error on a particular query
@@ -2233,21 +2242,26 @@ struct drm_i915_query_item {
 	 */
 	__s32 length;
 
-	/*
+	/**
+	 * @flags:
+	 *
 	 * When query_id == DRM_I915_QUERY_TOPOLOGY_INFO, must be 0.
 	 *
 	 * When query_id == DRM_I915_QUERY_PERF_CONFIG, must be one of the
-	 * following :
-	 *         - DRM_I915_QUERY_PERF_CONFIG_LIST
-	 *         - DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID
-	 *         - DRM_I915_QUERY_PERF_CONFIG_FOR_UUID
+	 * following:
+	 *
+	 *	- DRM_I915_QUERY_PERF_CONFIG_LIST
+	 *      - DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID
+	 *      - DRM_I915_QUERY_PERF_CONFIG_FOR_UUID
 	 */
 	__u32 flags;
 #define DRM_I915_QUERY_PERF_CONFIG_LIST          1
 #define DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID 2
 #define DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_ID   3
 
-	/*
+	/**
+	 * @data_ptr:
+	 *
 	 * Data will be written at the location pointed by data_ptr when the
 	 * value of length matches the length of the data to be written by the
 	 * kernel.
@@ -2255,16 +2269,41 @@ struct drm_i915_query_item {
 	__u64 data_ptr;
 };
 
+/**
+ * struct drm_i915_query - Supply an array of drm_i915_query_item for the kernel
+ * to fill out.
+ *
+ * Note that this is generally a two step process for each drm_i915_query_item
+ * in the array:
+ *
+ * 1. Call the DRM_IOCTL_I915_QUERY, giving it our array of drm_i915_query_item,
+ *    with drm_i915_query_item.size set to zero. The kernel will then fill in
+ *    the size, in bytes, which tells userspace how memory it needs to allocate
+ *    for the blob(say for an array of properties).
+ *
+ * 2. Next we call DRM_IOCTL_I915_QUERY again, this time with the
+ *    drm_i915_query_item.data_ptr equal to our newly allocated blob. Note that
+ *    the i915_query_item.size should still be the same as what the kernel
+ *    previously set. At this point the kernel can fill in the blob.
+ *
+ * Note that for some query items it can make sense for userspace to just pass
+ * in a buffer/blob equal to or larger than the required size. In this case only
+ * a single ioctl call is needed. For some smaller query items this can work
+ * quite well.
+ *
+ */
 struct drm_i915_query {
+	/** @num_items: The number of elements in the @items_ptr array */
 	__u32 num_items;
 
-	/*
-	 * Unused for now. Must be cleared to zero.
+	/**
+	 * @flags: Unused for now. Must be cleared to zero.
 	 */
 	__u32 flags;
 
-	/*
-	 * This points to an array of num_items drm_i915_query_item structures.
+	/**
+	 * @items_ptr: This points to an array of num_items drm_i915_query_item
+	 * structures.
 	 */
 	__u64 items_ptr;
 };
-- 
2.26.3

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux