The connector_type for following two EDT displays is missing:
- EDT ETM0430G0DH6
- EDT ETM0700G0BDH6
Both are parallel displays thus add the corresponding connector_type.
Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
---
drivers/gpu/drm/panel/panel-simple.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 44583d0ed902..723c09a82c4c 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1900,6 +1900,7 @@ static const struct panel_desc edt_etm0430g0dh6 = {
.width = 95,
.height = 54,
},
+ .connector_type = DRM_MODE_CONNECTOR_DPI,
};
static const struct drm_display_mode edt_et057090dhu_mode = {
@@ -1964,6 +1965,7 @@ static const struct panel_desc edt_etm0700g0bdh6 = {
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
+ .connector_type = DRM_MODE_CONNECTOR_DPI,
};
static const struct display_timing evervision_vgg804821_timing = {
--
2.25.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
