Re: [PATCH v2 3/3] drm/msm/dp: check main link status before start aux read

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Kuogee Hsieh (2021-04-13 16:11:44)
> Make sure main link is in connection state before start aux
> read/write operation to avoid unnecessary long delay due to
> main link had been unplugged.
> 
> Signed-off-by: Kuogee Hsieh <khsieh@xxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/msm/dp/dp_aux.c  |  5 +++++
>  drivers/gpu/drm/msm/dp/dp_link.c | 20 +++++++++++++++-----
>  2 files changed, 20 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
> index 7c22bfe..fae3806 100644
> --- a/drivers/gpu/drm/msm/dp/dp_aux.c
> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
> @@ -343,6 +343,11 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
>  
>         mutex_lock(&aux->mutex);
>  
> +       if (!dp_catalog_link_is_connected(aux->catalog)) {
> +               ret = -ETIMEDOUT;
> +               goto unlock_exit;
> +       }

I get a crash here sometimes when plugging and unplugging an apple HDMI
dongle during suspend/resume. I guess device power management
(dp_pm_suspend()) is happening in parallel with aux transfers from the
kthread. Why doesn't the aux communication start reporting NAKs once the
cable is disconnected?

[  366.210058] hdmi-audio-codec hdmi-audio-codec.15.auto: calling platform_pm_suspend+0x0/0x60 @ 7175, parent: ae90000.displayport-controller
[  366.222825] hdmi-audio-codec hdmi-audio-codec.15.auto: platform_pm_suspend+0x0/0x60 returned 0 after 1 usecs
[  366.232939] msm-dp-display ae90000.displayport-controller: calling dp_pm_suspend+0x0/0x80 @ 7175, parent: ae00000.mdss
[  366.244006] msm-dp-display ae90000.displayport-controller: dp_pm_suspend+0x0/0x80 returned 0 after 79 usecs
[  366.254025] msm_dsi ae94000.dsi: calling pm_runtime_force_suspend+0x0/0xb4 @ 7175, parent: ae00000.mdss
[  366.263669] msm_dsi ae94000.dsi: pm_runtime_force_suspend+0x0/0xb4 returned 0 after 0 usecs
[  366.272290] panel-simple panel: calling platform_pm_suspend+0x0/0x60 @ 7175, parent: platform
[  366.272501] ti_sn65dsi86 2-002d: calling pm_runtime_force_suspend+0x0/0xb4 @ 176, parent: i2c-2
[  366.281055] panel-simple panel: platform_pm_suspend+0x0/0x60 returned 0 after 0 usecs
[  366.281081] leds mmc1::: calling led_suspend+0x0/0x4c @ 7175, parent: 7c4000.sdhci
[  366.290065] ti_sn65dsi86 2-002d: pm_runtime_force_suspend+0x0/0xb4 returned 0 after 0 usecs
[  366.298046] leds mmc1::: led_suspend+0x0/0x4c returned 0 after 1 usecs
[  366.302994] Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP
[  366.303006] Modules linked in: vhost_vsock vmw_vsock_virtio_transport_common vsock vhost rfcomm algif_hash algif_skcipher af_alg xt_cgroup uinput xt_MASQUERADE venus_enc hci_uart venus_dec btqca cros_ec_typec typec bluetooth qcom_spmi_adc5 snd_soc_sc7180 qcom_spmi_temp_alarm ecdh_generic qcom_spmi_adc_tm5 qcom_vadc_common snd_soc_qcom_common ecc snd_soc_rt5682_i2c snd_soc_rt5682 snd_soc_rl6231 venus_core v4l2_mem2mem snd_soc_lpass_sc7180 snd_soc_lpass_hdmi snd_soc_lpass_cpu snd_soc_lpass_platform snd_soc_max98357a fuse iio_trig_sysfs cros_ec_sensors cros_ec_sensors_ring cros_ec_lid_angle cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf cros_ec_sensorhub lzo_rle lzo_compress zram ath10k_snoc ath10k_core ath mac80211 cfg80211 cdc_ether usbnet r8152 mii uvcvideo videobuf2_vmalloc joydev
[  366.303211] CPU: 0 PID: 224 Comm: dp_hpd_handler Not tainted 5.4.109 #27
[  366.303216] Hardware name: Google Lazor (rev3+) with KB Backlight (DT)
[  366.303225] pstate: 60c00009 (nZCv daif +PAN +UAO)
[  366.303234] pc : dp_catalog_link_is_connected+0x20/0x34
[  366.303244] lr : dp_aux_transfer+0x44/0x284
[  366.303250] sp : ffffffc011bfbbe0
[  366.303254] x29: ffffffc011bfbbe0 x28: aaaaaaaaaaaaaaaa 
[  366.303262] x27: 000000000000000c x26: ffffff896f8212bc 
[  366.303269] x25: 0000000000000001 x24: 0000000000000001 
[  366.303275] x23: 0000000000000020 x22: ffffff896ff82118 
[  366.303282] x21: ffffffc011bfbc50 x20: ffffff896ff82090 
[  366.303289] x19: ffffff896ffc3598 x18: 0000000000000000 
[  366.303295] x17: 0000000000000000 x16: 0000000000000001 
[  366.303303] x15: 0000000000000000 x14: 00000000000002ef 
[  366.303311] x13: 0000000000000400 x12: ffffffeb896ea060 
[  366.303317] x11: 0000000000000000 x10: 0000000000000000 
[  366.303324] x9 : ffffff896f061100 x8 : ffffffc010582204 
[  366.303331] x7 : 000000b2b5593519 x6 : 00000000003033ff 
[  366.303338] x5 : 0000000000000000 x4 : 0000000000000001 
[  366.303345] x3 : ffffff896ff432a1 x2 : 0000000000000000 
[  366.303352] x1 : 0000000000000119 x0 : ffffff896ffc3598 
[  366.303360] Call trace:
[  366.303367]  dp_catalog_link_is_connected+0x20/0x34
[  366.303374]  dp_aux_transfer+0x44/0x284
[  366.303387]  drm_dp_dpcd_access+0x8c/0x11c
[  366.303393]  drm_dp_dpcd_read+0x64/0x10c
[  366.303399]  dp_link_process_request+0x94/0xaf8
[  366.303405]  dp_display_usbpd_attention_cb+0x38/0x140
[  366.303411]  hpd_event_thread+0x3f0/0x48c
[  366.303426]  kthread+0x140/0x17c
[  366.303439]  ret_from_fork+0x10/0x18
[  366.303458] Code: d503201f f85f0268 f9400508 91081108 (b9400108) 

> +
>         aux->native = msg->request & (DP_AUX_NATIVE_WRITE & DP_AUX_NATIVE_READ);
>  
>         /* Ignore address only message */
> diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c
> index be986da..d35b18e 100644
> --- a/drivers/gpu/drm/msm/dp/dp_link.c
> +++ b/drivers/gpu/drm/msm/dp/dp_link.c
> @@ -737,18 +737,25 @@ static int dp_link_parse_sink_count(struct dp_link *dp_link)
>         return 0;
>  }
>  
> -static void dp_link_parse_sink_status_field(struct dp_link_private *link)
> +static int dp_link_parse_sink_status_field(struct dp_link_private *link)
>  {
>         int len = 0;
>  
>         link->prev_sink_count = link->dp_link.sink_count;
> -       dp_link_parse_sink_count(&link->dp_link);
> +       len = dp_link_parse_sink_count(&link->dp_link);
> +       if (len < 0) {
> +               DRM_ERROR("DP lparse sink count failed\n");

Is it 'lparse' on purpose?

> +               return len;
> +       }
>  
>         len = drm_dp_dpcd_read_link_status(link->aux,
>                 link->link_status);
> -       if (len < DP_LINK_STATUS_SIZE)
> +       if (len < DP_LINK_STATUS_SIZE) {
>                 DRM_ERROR("DP link status read failed\n");
> -       dp_link_parse_request(link);
> +               return len;
> +       }
> +
> +       return dp_link_parse_request(link);
>  }
>  
>  /**
> @@ -1032,7 +1039,10 @@ int dp_link_process_request(struct dp_link *dp_link)
>  
>         dp_link_reset_data(link);
>  
> -       dp_link_parse_sink_status_field(link);
> +       ret = dp_link_parse_sink_status_field(link);
> +       if (ret) {
> +               return ret;
> +       }
>  
>         if (link->request.test_requested == DP_TEST_LINK_EDID_READ) {
>                 dp_link->sink_request |= DP_TEST_LINK_EDID_READ;

These are probably good fixes on their own given that
dp_link_parse_sink_count() can return an error and that was being
ignored.
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux