Hi Paul, On Tue, Apr 13, 2021 at 07:09:17PM +0100, Paul Cercueil wrote: > Le lun. 12 avril 2021 à 17:46, Neil Armstrong a écrit : > > From: Phong LE <ple@xxxxxxxxxxxx> > > > > Add the ITE bridge HDMI it66121 bindings. > > > > Signed-off-by: Phong LE <ple@xxxxxxxxxxxx> > > Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> > > --- > > .../bindings/display/bridge/ite,it66121.yaml | 123 ++++++++++++++++++ > > 1 file changed, 123 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml > > > > diff --git > > a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml > > b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml > > new file mode 100644 > > index 000000000000..61ed6dc7740b > > --- /dev/null > > +++ > > b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml > > @@ -0,0 +1,123 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/display/bridge/ite,it66121.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: ITE it66121 HDMI bridge Device Tree Bindings > > + > > +maintainers: > > + - Phong LE <ple@xxxxxxxxxxxx> > > + - Neil Armstrong <narmstrong@xxxxxxxxxxxx> > > + > > +description: | > > + The IT66121 is a high-performance and low-power single channel HDMI > > + transmitter, fully compliant with HDMI 1.3a, HDCP 1.2 and backward > > compatible > > + to DVI 1.0 specifications. > > + > > +properties: > > + compatible: > > + const: ite,it66121 > > + > > + reg: > > + maxItems: 1 > > + description: base I2C address of the device > > + > > + reset-gpios: > > + maxItems: 1 > > + description: GPIO connected to active low reset > > + > > + vrf12-supply: > > + description: Regulator for 1.2V analog core power. > > + > > + vcn33-supply: > > + description: Regulator for 3.3V digital core power. > > + > > + vcn18-supply: > > + description: Regulator for 1.8V IO core power. > > + > > + interrupts: > > + maxItems: 1 > > + > > + ports: > > + $ref: /schemas/graph.yaml#/properties/ports > > + > > + properties: > > + port@0: > > + $ref: /schemas/graph.yaml#/$defs/port-base > > + unevaluatedProperties: false > > + description: DPI input port. > > + > > + properties: > > + endpoint: > > + $ref: /schemas/graph.yaml#/$defs/endpoint-base > > + unevaluatedProperties: false > > + > > + properties: > > + bus-width: > > + description: > > + Endpoint bus width. > > + enum: > > + - 12 # 12 data lines connected and dual-edge mode > > + - 24 # 24 data lines connected and single-edge > > mode > > + default: 24 > > + > > + port@1: > > + $ref: /schemas/graph.yaml#/properties/port > > + description: HDMI Connector port. > > + > > + required: > > + - port@0 > > + - port@1 > > Should port@1 really be required? Since the chip itself handles the > hotplug detection and stuff like DCC, I'm not sure what to connect here. It should be connected to a DT node that models the connector (Documentation/devicetree/bindings/display/connector/*). > > + > > +required: > > + - compatible > > + - reg > > + - reset-gpios > > + - vrf12-supply > > + - vcn33-supply > > + - vcn18-supply > > + - interrupts > > + - ports > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + i2c { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + it66121hdmitx: it66121hdmitx@4c { > > + compatible = "ite,it66121"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&ite_pins_default>; > > + vcn33-supply = <&mt6358_vcn33_wifi_reg>; > > + vcn18-supply = <&mt6358_vcn18_reg>; > > + vrf12-supply = <&mt6358_vrf12_reg>; > > + reset-gpios = <&pio 160 1 /* GPIO_ACTIVE_LOW */>; > > + interrupt-parent = <&pio>; > > + interrupts = <4 8 /* IRQ_TYPE_LEVEL_LOW */>; > > + reg = <0x4c>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + it66121_in: endpoint { > > + bus-width = <12>; > > + remote-endpoint = <&display_out>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + hdmi_conn_out: endpoint { > > + remote-endpoint = <&hdmi_conn_in>; > > + }; > > + }; > > + }; > > + }; > > + }; -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
