We'll need to have the HVS binding before the HDMI controllers so that we can check whether the firmware allows to run in 4kp60. Reorder a bit the component list, and document the current constraints we're aware of. Acked-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx> Acked-by: Thomas Zimmermann <tzimmermann@xxxxxxx> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx> --- drivers/gpu/drm/vc4/vc4_drv.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c index cd1fb75c66a7..fef31d6eea60 100644 --- a/drivers/gpu/drm/vc4/vc4_drv.c +++ b/drivers/gpu/drm/vc4/vc4_drv.c @@ -339,12 +339,21 @@ static const struct component_master_ops vc4_drm_ops = { .unbind = vc4_drm_unbind, }; +/* + * This list determines the binding order of our components, and we have + * a few constraints: + * - The TXP driver needs to be bound before the PixelValves (CRTC) + * but after the HVS to set the possible_crtc field properly + * - The HDMI driver needs to be bound after the HVS so that we can + * lookup the HVS maximum core clock rate and figure out if we + * support 4kp60 or not. + */ static struct platform_driver *const component_drivers[] = { + &vc4_hvs_driver, &vc4_hdmi_driver, &vc4_vec_driver, &vc4_dpi_driver, &vc4_dsi_driver, - &vc4_hvs_driver, &vc4_txp_driver, &vc4_crtc_driver, &vc4_v3d_driver, -- 2.30.2 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel