Re: [PATCH v3] drivers: introduce and use WANT_DMA_CMA for soft dependencies on DMA_CMA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12.04.21 15:12, Robin Murphy wrote:
On 2021-04-09 14:39, David Hildenbrand wrote:
On 09.04.21 15:35, Arnd Bergmann wrote:
On Fri, Apr 9, 2021 at 1:21 PM David Hildenbrand <david@xxxxxxxxxx>
wrote:

Random drivers should not override a user configuration of core knobs
(e.g., CONFIG_DMA_CMA=n). Applicable drivers would like to use DMA_CMA,
which depends on CMA, if possible; however, these drivers also have to
tolerate if DMA_CMA is not available/functioning, for example, if no CMA
area for DMA_CMA use has been setup via "cma=X". In the worst case, the
driver cannot do it's job properly in some configurations.

For example, commit 63f5677544b3 ("drm/etnaviv: select CMA and
DMA_CMA if
available") documents
          While this is no build dependency, etnaviv will only work
correctly
          on most systems if CMA and DMA_CMA are enabled. Select both
options
          if available to avoid users ending up with a non-working GPU
due to
          a lacking kernel config.
So etnaviv really wants to have DMA_CMA, however, can deal with some
cases
where it is not available.

Let's introduce WANT_DMA_CMA and use it in most cases where drivers
select CMA/DMA_CMA, or depend on DMA_CMA (in a wrong way via CMA because
of recursive dependency issues).

We'll assume that any driver that selects DRM_GEM_CMA_HELPER or
DRM_KMS_CMA_HELPER would like to use DMA_CMA if possible.

With this change, distributions can disable CONFIG_CMA or
CONFIG_DMA_CMA, without it silently getting enabled again by random
drivers. Also, we'll now automatically try to enabled both, CONFIG_CMA
and CONFIG_DMA_CMA if they are unspecified and any driver is around that
selects WANT_DMA_CMA -- also implicitly via DRM_GEM_CMA_HELPER or
DRM_KMS_CMA_HELPER.

For example, if any driver selects WANT_DMA_CMA and we do a
"make olddefconfig":

1. With "# CONFIG_CMA is not set" and no specification of
     "CONFIG_DMA_CMA"

-> CONFIG_DMA_CMA won't be part of .config

2. With no specification of CONFIG_CMA or CONFIG_DMA_CMA

Contiguous Memory Allocator (CMA) [Y/n/?] (NEW)
DMA Contiguous Memory Allocator (DMA_CMA) [Y/n/?] (NEW)

3. With "# CONFIG_CMA is not set" and "# CONFIG_DMA_CMA is not set"

-> CONFIG_DMA_CMA will be removed from .config

Note: drivers/remoteproc seems to be special; commit c51e882cd711
("remoteproc/davinci: Update Kconfig to depend on DMA_CMA") explains
that
there is a real dependency to DMA_CMA for it to work; leave that
dependency
in place and don't convert it to a soft dependency.

I don't think this dependency is fundamentally different from the others,
though davinci machines tend to have less memory than a lot of the
other machines, so it's more likely to fail without CMA.


I was also unsure - and Lucas had similar thoughts. If you want, I can
send a v4 also taking care of this.

TBH I think it should all just be removed. DMA_CMA is effectively an
internal feature of the DMA API, and drivers which simply use the DMA
API shouldn't really be trying to assume *how* things might be allocated
at runtime - CMA is hardly the only way. Platform-level assumptions
about the presence or not of IOMMUs, memory carveouts, etc., and whether
it even matters - e.g. a device with a tiny LCD may only need display
buffers which still fit in a regular MAX_ORDER allocation - could go in
platform-specific configs, but I really don't think they belong at the
generic subsystem level.

We already have various examples like I2S drivers that won't even probe
without a dmaengine provider being present, or host controller drivers
which are useless without their corresponding phy driver (and I'm
guessing you can probably also do higher-level things like include the
block layer but omit all filesystem drivers). I don't believe it's
Kconfig's job to try to guess whether a given configuration is *useful*,
only to enforce that's it's valid to build.

That would mean: if it's not a built-time dependency, don't mention it in Kconfig.

If that were true, why do we have have defaults modeled in Kconfig then?

IMHO, some part of Kconfig is to give you sane defaults.

--
Thanks,

David / dhildenb

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux