Re: [PATCH] drm/mediatek: force hsa hsa hfp packets multiple of line num to avoid screen shift

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Jitao:

Jitao Shi <jitao.shi@xxxxxxxxxxxx> 於 2021年4月7日 週三 下午10:37寫道:
>
> The bridge chip ANX7625 require the line packets ending at the sametime
> or ANX7625 will shift the screen.
>
> Change-Id: Ia324ad28fbff54140feedb9a1d6bfb2b246d0447
> Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index a1ff152ef468..e825a80862de 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -194,6 +194,8 @@ struct mtk_dsi {
>         struct clk *hs_clk;
>
>         u32 data_rate;
> +       /* force dsi line end without dsi_null data */
> +       bool force_dsi_end_without_null;
>
>         unsigned long mode_flags;
>         enum mipi_dsi_pixel_format format;
> @@ -495,6 +497,13 @@ static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi)
>                 DRM_WARN("HFP + HBP less than d-phy, FPS will under 60Hz\n");
>         }
>
> +       if (dsi->force_dsi_end_without_null) {
> +               horizontal_sync_active_byte = roundup(horizontal_sync_active_byte, dsi->lanes) - 2;
> +               horizontal_frontporch_byte = roundup(horizontal_frontporch_byte, dsi->lanes) - 2;
> +               horizontal_backporch_byte = roundup(horizontal_backporch_byte, dsi->lanes) - 2;
> +               horizontal_backporch_byte -= (vm->hactive * dsi_tmp_buf_bpp + 2) % dsi->lanes;
> +       }
> +
>         writel(horizontal_sync_active_byte, dsi->regs + DSI_HSA_WC);
>         writel(horizontal_backporch_byte, dsi->regs + DSI_HBP_WC);
>         writel(horizontal_frontporch_byte, dsi->regs + DSI_HFP_WC);
> @@ -1091,6 +1100,9 @@ static int mtk_dsi_probe(struct platform_device *pdev)
>         dsi->bridge.of_node = dev->of_node;
>         dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
>
> +       dsi->force_dsi_end_without_null = of_property_read_bool(dev->of_node,
> +                                                               "force_dsi_end_without_null");

If force_dsi_end_without_null is caused by ANX7625, I think we should
get this information from ANX7625.

Regards,
Chun-Kuang.

> +
>         drm_bridge_add(&dsi->bridge);
>
>         ret = component_add(&pdev->dev, &mtk_dsi_component_ops);
> --
> 2.25.1
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux