From: Kalyan Thota <kalyant@xxxxxxxxxxxxxx>
[ Upstream commit 627dc55c273dab308303a5217bd3e767d7083ddb ]
DPU runtime resume will request for a min vote on the AXI bus as
it is a necessary step before turning ON the AXI clock.
The change does below
1) Move the icc path set before requesting runtime get_sync.
2) remove the dependency of hw catalog for min ib vote
as it is initialized at a later point.
Signed-off-by: Kalyan Thota <kalyan_t@xxxxxxxxxxxxxx>
Tested-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
Signed-off-by: Rob Clark <robdclark@xxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 374b0e8471e6..0f1b04ef61f2 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -43,6 +43,8 @@
#define DPU_DEBUGFS_DIR "msm_dpu"
#define DPU_DEBUGFS_HWMASKNAME "hw_log_mask"
+#define MIN_IB_BW 400000000ULL /* Min ib vote 400MB */
+
static int dpu_kms_hw_init(struct msm_kms *kms);
static void _dpu_kms_mmu_destroy(struct dpu_kms *dpu_kms);
@@ -931,6 +933,9 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
DPU_DEBUG("REG_DMA is not defined");
}
+ if (of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss"))
+ dpu_kms_parse_data_bus_icc_path(dpu_kms);
+
pm_runtime_get_sync(&dpu_kms->pdev->dev);
dpu_kms->core_rev = readl_relaxed(dpu_kms->mmio + 0x0);
@@ -1032,9 +1037,6 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
dpu_vbif_init_memtypes(dpu_kms);
- if (of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss"))
- dpu_kms_parse_data_bus_icc_path(dpu_kms);
-
pm_runtime_put_sync(&dpu_kms->pdev->dev);
return 0;
@@ -1191,10 +1193,10 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev)
ddev = dpu_kms->dev;
+ WARN_ON(!(dpu_kms->num_paths));
/* Min vote of BW is required before turning on AXI clk */
for (i = 0; i < dpu_kms->num_paths; i++)
- icc_set_bw(dpu_kms->path[i], 0,
- dpu_kms->catalog->perf.min_dram_ib);
+ icc_set_bw(dpu_kms->path[i], 0, Bps_to_icc(MIN_IB_BW));
rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true);
if (rc) {
--
2.30.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
