On 2021-03-24 08:18, Dmitry Baryshkov wrote:
The only PLL using multiple enable sequences is the 28nm PLL, which
just
does the single step in the loop. Push that support back into the PLL
code.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Reviewed-by: Abhinav Kumar <abhinavk@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 3 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 23 +++++--
.../gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 3 +-
drivers/gpu/drm/msm/dsi/phy/dsi_pll.c | 65 +++++++------------
drivers/gpu/drm/msm/dsi/phy/dsi_pll.h | 4 +-
5 files changed, 42 insertions(+), 56 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
index 6a63901da7a4..4386edfa91fe 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
@@ -1087,8 +1087,7 @@ struct msm_dsi_pll *msm_dsi_pll_14nm_init(struct
platform_device *pdev, int id)
pll_14nm->vco_delay = 1;
- pll->en_seq_cnt = 1;
- pll->enable_seqs[0] = dsi_pll_14nm_enable_seq;
+ pll->enable_seq = dsi_pll_14nm_enable_seq;
ret = pll_14nm_register(pll_14nm);
if (ret) {
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
index 2f502efa4dd5..760cf7956fa2 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
@@ -311,7 +311,7 @@ static const struct clk_ops
clk_ops_dsi_pll_28nm_vco = {
/*
* PLL Callbacks
*/
-static int dsi_pll_28nm_enable_seq_hpm(struct msm_dsi_pll *pll)
+static int _dsi_pll_28nm_enable_seq_hpm(struct msm_dsi_pll *pll)
{
struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
struct device *dev = &pll_28nm->pdev->dev;
@@ -386,6 +386,19 @@ static int dsi_pll_28nm_enable_seq_hpm(struct
msm_dsi_pll *pll)
return locked ? 0 : -EINVAL;
}
+static int dsi_pll_28nm_enable_seq_hpm(struct msm_dsi_pll *pll)
+{
+ int i, ret;
+
+ for (i = 0; i < 3; i++) {
+ ret = _dsi_pll_28nm_enable_seq_hpm(pll);
+ if (!ret)
+ return 0;
+ }
+
+ return ret;
+}
+
static int dsi_pll_28nm_enable_seq_lp(struct msm_dsi_pll *pll)
{
struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
@@ -619,15 +632,11 @@ struct msm_dsi_pll *msm_dsi_pll_28nm_init(struct
platform_device *pdev,
if (type == MSM_DSI_PHY_28NM_HPM) {
pll_28nm->vco_delay = 1;
- pll->en_seq_cnt = 3;
- pll->enable_seqs[0] = dsi_pll_28nm_enable_seq_hpm;
- pll->enable_seqs[1] = dsi_pll_28nm_enable_seq_hpm;
- pll->enable_seqs[2] = dsi_pll_28nm_enable_seq_hpm;
+ pll->enable_seq = dsi_pll_28nm_enable_seq_hpm;
} else if (type == MSM_DSI_PHY_28NM_LP) {
pll_28nm->vco_delay = 1000;
- pll->en_seq_cnt = 1;
- pll->enable_seqs[0] = dsi_pll_28nm_enable_seq_lp;
+ pll->enable_seq = dsi_pll_28nm_enable_seq_lp;
} else {
DRM_DEV_ERROR(&pdev->dev, "phy type (%d) is not 28nm\n", type);
return ERR_PTR(-EINVAL);
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
index 4a40513057e8..2cfb7edf91d8 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
@@ -515,8 +515,7 @@ struct msm_dsi_pll
*msm_dsi_pll_28nm_8960_init(struct platform_device *pdev,
pll->save_state = dsi_pll_28nm_save_state;
pll->restore_state = dsi_pll_28nm_restore_state;
- pll->en_seq_cnt = 1;
- pll->enable_seqs[0] = dsi_pll_28nm_enable_seq;
+ pll->enable_seq = dsi_pll_28nm_enable_seq;
ret = pll_28nm_register(pll_28nm);
if (ret) {
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_pll.c
b/drivers/gpu/drm/msm/dsi/phy/dsi_pll.c
index 3dc65877fa10..9e9fa90bf504 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_pll.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_pll.c
@@ -5,46 +5,6 @@
#include "dsi_pll.h"
-static int dsi_pll_enable(struct msm_dsi_pll *pll)
-{
- int i, ret = 0;
-
- /*
- * Certain PLLs do not allow VCO rate update when it is on.
- * Keep track of their status to turn on/off after set rate success.
- */
- if (unlikely(pll->pll_on))
- return 0;
-
- /* Try all enable sequences until one succeeds */
- for (i = 0; i < pll->en_seq_cnt; i++) {
- ret = pll->enable_seqs[i](pll);
- DBG("DSI PLL %s after sequence #%d",
- ret ? "unlocked" : "locked", i + 1);
- if (!ret)
- break;
- }
-
- if (ret) {
- DRM_ERROR("DSI PLL failed to lock\n");
- return ret;
- }
-
- pll->pll_on = true;
-
- return 0;
-}
-
-static void dsi_pll_disable(struct msm_dsi_pll *pll)
-{
- if (unlikely(!pll->pll_on))
- return;
-
- pll->disable_seq(pll);
-
- pll->pll_on = false;
-}
-
/*
* DSI PLL Helper functions
*/
@@ -64,15 +24,36 @@ long msm_dsi_pll_helper_clk_round_rate(struct
clk_hw *hw,
int msm_dsi_pll_helper_clk_prepare(struct clk_hw *hw)
{
struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ int ret = 0;
- return dsi_pll_enable(pll);
+ /*
+ * Certain PLLs do not allow VCO rate update when it is on.
+ * Keep track of their status to turn on/off after set rate success.
+ */
+ if (unlikely(pll->pll_on))
+ return 0;
+
+ ret = pll->enable_seq(pll);
+ if (ret) {
+ DRM_ERROR("DSI PLL failed to lock\n");
+ return ret;
+ }
+
+ pll->pll_on = true;
+
+ return 0;
}
void msm_dsi_pll_helper_clk_unprepare(struct clk_hw *hw)
{
struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- dsi_pll_disable(pll);
+ if (unlikely(!pll->pll_on))
+ return;
+
+ pll->disable_seq(pll);
+
+ pll->pll_on = false;
}
void msm_dsi_pll_helper_unregister_clks(struct platform_device *pdev,
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_pll.h
b/drivers/gpu/drm/msm/dsi/phy/dsi_pll.h
index bbecb1de5678..eebf90671eec 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_pll.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_pll.h
@@ -12,7 +12,6 @@
#include "dsi.h"
#define NUM_DSI_CLOCKS_MAX 6
-#define MAX_DSI_PLL_EN_SEQS 10
struct msm_dsi_pll {
enum msm_dsi_phy_type type;
@@ -23,9 +22,8 @@ struct msm_dsi_pll {
unsigned long min_rate;
unsigned long max_rate;
- u32 en_seq_cnt;
- int (*enable_seqs[MAX_DSI_PLL_EN_SEQS])(struct msm_dsi_pll *pll);
+ int (*enable_seq)(struct msm_dsi_pll *pll);
void (*disable_seq)(struct msm_dsi_pll *pll);
int (*get_provider)(struct msm_dsi_pll *pll,
struct clk **byte_clk_provider,
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
