Am 25.03.21 um 08:48 schrieb Thomas Hellström (Intel):
On 3/25/21 12:14 AM, Jason Gunthorpe wrote:
On Wed, Mar 24, 2021 at 09:07:53PM +0100, Thomas Hellström (Intel)
wrote:
On 3/24/21 7:31 PM, Christian König wrote:
Am 24.03.21 um 17:38 schrieb Jason Gunthorpe:
On Wed, Mar 24, 2021 at 04:50:14PM +0100, Thomas Hellström (Intel)
wrote:
On 3/24/21 2:48 PM, Jason Gunthorpe wrote:
On Wed, Mar 24, 2021 at 02:35:38PM +0100, Thomas Hellström
(Intel) wrote:
In an ideal world the creation/destruction of page
table levels would
by dynamic at this point, like THP.
Hmm, but I'm not sure what problem we're trying to solve
by changing the
interface in this way?
We are trying to make a sensible driver API to deal with huge
pages.
Currently if the core vm requests a huge pud, we give it
one, and if we
can't or don't want to (because of dirty-tracking, for
example, which is
always done on 4K page-level) we just return
VM_FAULT_FALLBACK, and the
fault is retried at a lower level.
Well, my thought would be to move the pte related stuff into
vmf_insert_range instead of recursing back via VM_FAULT_FALLBACK.
I don't know if the locking works out, but it feels cleaner that
the
driver tells the vmf how big a page it can stuff in, not the vm
telling the driver to stuff in a certain size page which it
might not
want to do.
Some devices want to work on a in-between page size like 64k so
they
can't form 2M pages but they can stuff 64k of 4K pages in a
batch on
every fault.
Hmm, yes, but we would in that case be limited anyway to insert
ranges
smaller than and equal to the fault size to avoid extensive and
possibly
unnecessary checks for contigous memory.
Why? The insert function is walking the page tables, it just updates
things as they are. It learns the arragement for free while doing the
walk.
The device has to always provide consistent data, if it overlaps into
pages that are already populated that is fine so long as it isn't
changing their addresses.
And then if we can't support the full fault size, we'd need to
either presume a size and alignment of the next level or search for
contigous memory in both directions around the fault address,
perhaps unnecessarily as well.
You don't really need to care about levels, the device should be
faulting in the largest memory regions it can within its efficiency.
If it works on 4M pages then it should be faulting 4M pages. The page
size of the underlying CPU doesn't really matter much other than some
tuning to impact how the device's allocator works.
Yes, but then we'd be adding a lot of complexity into this function
that is
already provided by the current interface for DAX, for little or no
gain, at
least in the drm/ttm setting. Please think of the following
situation: You
get a fault, you do an extensive time-consuming scan of your VRAM
buffer
object into which the fault goes and determine you can fault 1GB.
Now you
hand it to vmf_insert_range() and because the user-space address is
misaligned, or already partly populated because of a previous
eviction, you
can only fault single pages, and you end up faulting a full GB of
single
pages perhaps for a one-time small update.
Why would "you can only fault single pages" ever be true? If you have
1GB of pages then the vmf_insert_range should allocate enough page
table entries to consume it, regardless of alignment.
Ah yes, What I meant was you can only insert PTE size entries, either
because of misalignment or because the page-table is alredy
pre-populated with pmd size page directories, which you can't remove
with only the read side of the mmap lock held.
Please explain that further. Why do we need the mmap lock to insert PMDs
but not when insert PTEs?
And why shouldn't DAX switch to this kind of interface anyhow? It is
basically exactly the same problem. The underlying filesystem block
size is *not* necessarily aligned to the CPU page table sizes and DAX
would benefit from better handling of this mismatch.
First, I think we must sort out what "better handling" means. This is
my takeout of the discussion so far:
Claimed Pros: of vmf_insert_range()
* We get an interface that doesn't require knowledge of CPU page table
entry level sizes.
* We get the best efficiency when we look at what the GPU driver
provides. (I disagree on this one).
Claimed Cons:
* A new implementation that may get complicated particularly if it
involves modifying all of the DAX code
* The driver would have to know about those sizes anyway to get
alignment right (Applies to DRM, because we mmap buffer objects, not
physical address ranges. But not to DAX AFAICT),
I don't think so. We could just align all buffers to their next power of
two in size. Since we have plenty of offset space that shouldn't matter
much.
Apart from that I still don't fully get why we need this in the first place.
* We loose efficiency, because we are prepared to spend an extra
effort for alignment- and continuity checks when we know we can insert
a huge page table entry, but not if we know we can't
I don't think so either. See with don't need any extra effort for the
alignment nor the handling, it actually becomes much cheaper as far as I
can see.
In other words when you have a fault you don't care about the faulting
address that much, you only use it to determine the memory segment to map.
Then this whole memory segment is mapped into the address space of the
user application.
If can of course happen that we need to fiddle with addresses and sizes
because userspace only mmap a fraction of the underlying buffer, but in
reality we never do this.
* We loose efficiency because we might unnecessarily prefault a number
of PTE size page-table entries (really a special case of the above one).
I really don't see that either. When a buffer is accessed by the CPU it
is in > 90% of all cases completely accessed. Not faulting in full
ranges is just optimizing for a really unlikely case here.
Now in the context of quickly fixing a critical bug, the choice IMHO
becomes easy.
Well for quick fixing this I would rather disable huge pages for now.
Regards,
Christian.
On top of this, unless we want to do the walk trying increasingly
smaller
sizes of vmf_insert_xxx(), we'd have to use apply_to_page_range()
and teach
it about transhuge page table entries, because pagewalk.c can't be
used (It
can't populate page tables). That also means apply_to_page_range()
needs to
be complicated with page table locks since transhuge pages aren't
stable and
can be zapped and refaulted under us while we do the walk.
I didn't say it would be simple :) But we also need to stop hacking
around the sides of all this huge page stuff and come up with sensible
APIs that drivers can actually implement correctly. Exposing drivers
to specific kinds of page levels really feels like the wrong level of
abstraction.
I generally agree. But for the last sentence I think the potential
gain must be carefully weighed against the efficiency arguments.
Once we start doing this we should do it everywhere, the io_remap_pfn
stuff should be able to create huge special IO pages as well, for
instance.
I agree here as well. Here we can be more agressive as the contigous
range is already known and we IIRC hold the mmap lock in write mode.
On top of this, the user-space address allocator needs to know how
large gpu
pages are aligned in buffer objects to have a reasonable chance of
aligning
with CPU huge page boundaries which is a requirement to be able to
insert a
huge CPU page table entry, so the driver would basically need the
drm helper
that can do this alignment anyway.
Don't you have this problem anyhow?
Yes, but it sort of defeats the simplicity argument of the proposed
interface change.
/Thomas
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
