On Sun, Mar 21, 2021 at 12:43:40PM +0100, Linus Walleij wrote: > The KTD259 is just a newer version of the KTD253 and works > all the same. > > Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> (For Lee) Acked-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx> Daniel. > --- > .../bindings/leds/backlight/kinetic,ktd253.yaml | 9 ++++++--- > 1 file changed, 6 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml > index 7a6ec1f8c0f3..73fa59e62181 100644 > --- a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml > +++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml > @@ -4,13 +4,13 @@ > $id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd253.yaml# > $schema: http://devicetree.org/meta-schemas/core.yaml# > > -title: Kinetic Technologies KTD253 one-wire backlight > +title: Kinetic Technologies KTD253 and KTD259 one-wire backlight > > maintainers: > - Linus Walleij <linus.walleij@xxxxxxxxxx> > > description: | > - The Kinetic Technologies KTD253 is a white LED backlight that is > + The Kinetic Technologies KTD253 and KTD259 are white LED backlights > controlled by a single GPIO line. If you just turn on the backlight > it goes to maximum backlight then you can set the level of backlight > using pulses on the enable wire. This is sometimes referred to as > @@ -21,7 +21,10 @@ allOf: > > properties: > compatible: > - const: kinetic,ktd253 > + items: > + - enum: > + - kinetic,ktd253 > + - kinetic,ktd259 > > enable-gpios: > description: GPIO to use to enable/disable and dim the backlight. > -- > 2.29.2 > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
