Each phy version is tightly coupled with the corresponding PLL code,
there is no need to keep them separate. Fuse source files together in
order to simplify DSI code.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/gpu/drm/msm/Makefile | 9 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 873 +++++++++++++
drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 1089 ++++++++++++++++
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 637 ++++++++++
.../gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 519 ++++++++
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 904 ++++++++++++++
.../gpu/drm/msm/dsi/{pll => phy}/dsi_pll.c | 0
.../gpu/drm/msm/dsi/{pll => phy}/dsi_pll.h | 0
drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 881 -------------
drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c | 1096 -----------------
drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c | 643 ----------
.../gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c | 526 --------
drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c | 912 --------------
13 files changed, 4023 insertions(+), 4066 deletions(-)
rename drivers/gpu/drm/msm/dsi/{pll => phy}/dsi_pll.c (100%)
rename drivers/gpu/drm/msm/dsi/{pll => phy}/dsi_pll.h (100%)
delete mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
delete mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c
delete mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c
delete mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
delete mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c
diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 3cc906121fb3..1be6996b80b7 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -136,13 +136,6 @@ msm-$(CONFIG_DRM_MSM_DSI_14NM_PHY) += dsi/phy/dsi_phy_14nm.o
msm-$(CONFIG_DRM_MSM_DSI_10NM_PHY) += dsi/phy/dsi_phy_10nm.o
msm-$(CONFIG_DRM_MSM_DSI_7NM_PHY) += dsi/phy/dsi_phy_7nm.o
-ifeq ($(CONFIG_DRM_MSM_DSI_PLL),y)
-msm-y += dsi/pll/dsi_pll.o
-msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/pll/dsi_pll_28nm.o
-msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/pll/dsi_pll_28nm_8960.o
-msm-$(CONFIG_DRM_MSM_DSI_14NM_PHY) += dsi/pll/dsi_pll_14nm.o
-msm-$(CONFIG_DRM_MSM_DSI_10NM_PHY) += dsi/pll/dsi_pll_10nm.o
-msm-$(CONFIG_DRM_MSM_DSI_7NM_PHY) += dsi/pll/dsi_pll_7nm.o
-endif
+msm-$(CONFIG_DRM_MSM_DSI_PLL) += dsi/phy/dsi_pll.o
obj-$(CONFIG_DRM_MSM) += msm.o
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
index d1b92d4dc197..535d7e2393ae 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
@@ -3,11 +3,884 @@
* Copyright (c) 2018, The Linux Foundation
*/
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/iopoll.h>
+#include "dsi_pll.h"
#include "dsi_phy.h"
#include "dsi.xml.h"
+/*
+ * DSI PLL 10nm - clock diagram (eg: DSI0):
+ *
+ * dsi0_pll_out_div_clk dsi0_pll_bit_clk
+ * | |
+ * | |
+ * +---------+ | +----------+ | +----+
+ * dsi0vco_clk ---| out_div |--o--| divl_3_0 |--o--| /8 |-- dsi0_phy_pll_out_byteclk
+ * +---------+ | +----------+ | +----+
+ * | |
+ * | | dsi0_pll_by_2_bit_clk
+ * | | |
+ * | | +----+ | |\ dsi0_pclk_mux
+ * | |--| /2 |--o--| \ |
+ * | | +----+ | \ | +---------+
+ * | --------------| |--o--| div_7_4 |-- dsi0_phy_pll_out_dsiclk
+ * |------------------------------| / +---------+
+ * | +-----+ | /
+ * -----------| /4? |--o----------|/
+ * +-----+ | |
+ * | |dsiclk_sel
+ * |
+ * dsi0_pll_post_out_div_clk
+ */
+
+#define DSI_BYTE_PLL_CLK 0
+#define DSI_PIXEL_PLL_CLK 1
+#define NUM_PROVIDED_CLKS 2
+
+#define VCO_REF_CLK_RATE 19200000
+
+struct dsi_pll_regs {
+ u32 pll_prop_gain_rate;
+ u32 pll_lockdet_rate;
+ u32 decimal_div_start;
+ u32 frac_div_start_low;
+ u32 frac_div_start_mid;
+ u32 frac_div_start_high;
+ u32 pll_clock_inverters;
+ u32 ssc_stepsize_low;
+ u32 ssc_stepsize_high;
+ u32 ssc_div_per_low;
+ u32 ssc_div_per_high;
+ u32 ssc_adjper_low;
+ u32 ssc_adjper_high;
+ u32 ssc_control;
+};
+
+struct dsi_pll_config {
+ u32 ref_freq;
+ bool div_override;
+ u32 output_div;
+ bool ignore_frac;
+ bool disable_prescaler;
+ bool enable_ssc;
+ bool ssc_center;
+ u32 dec_bits;
+ u32 frac_bits;
+ u32 lock_timer;
+ u32 ssc_freq;
+ u32 ssc_offset;
+ u32 ssc_adj_per;
+ u32 thresh_cycles;
+ u32 refclk_cycles;
+};
+
+struct pll_10nm_cached_state {
+ unsigned long vco_rate;
+ u8 bit_clk_div;
+ u8 pix_clk_div;
+ u8 pll_out_div;
+ u8 pll_mux;
+};
+
+struct dsi_pll_10nm {
+ struct msm_dsi_pll base;
+
+ int id;
+ struct platform_device *pdev;
+
+ void __iomem *phy_cmn_mmio;
+ void __iomem *mmio;
+
+ u64 vco_ref_clk_rate;
+ u64 vco_current_rate;
+
+ /* protects REG_DSI_10nm_PHY_CMN_CLK_CFG0 register */
+ spinlock_t postdiv_lock;
+
+ int vco_delay;
+ struct dsi_pll_config pll_configuration;
+ struct dsi_pll_regs reg_setup;
+
+ /* private clocks: */
+ struct clk_hw *out_div_clk_hw;
+ struct clk_hw *bit_clk_hw;
+ struct clk_hw *byte_clk_hw;
+ struct clk_hw *by_2_bit_clk_hw;
+ struct clk_hw *post_out_div_clk_hw;
+ struct clk_hw *pclk_mux_hw;
+ struct clk_hw *out_dsiclk_hw;
+
+ /* clock-provider: */
+ struct clk_hw_onecell_data *hw_data;
+
+ struct pll_10nm_cached_state cached_state;
+
+ enum msm_dsi_phy_usecase uc;
+ struct dsi_pll_10nm *slave;
+};
+
+#define to_pll_10nm(x) container_of(x, struct dsi_pll_10nm, base)
+
+/*
+ * Global list of private DSI PLL struct pointers. We need this for Dual DSI
+ * mode, where the master PLL's clk_ops needs access the slave's private data
+ */
+static struct dsi_pll_10nm *pll_10nm_list[DSI_MAX];
+
+static void dsi_pll_setup_config(struct dsi_pll_10nm *pll)
+{
+ struct dsi_pll_config *config = &pll->pll_configuration;
+
+ config->ref_freq = pll->vco_ref_clk_rate;
+ config->output_div = 1;
+ config->dec_bits = 8;
+ config->frac_bits = 18;
+ config->lock_timer = 64;
+ config->ssc_freq = 31500;
+ config->ssc_offset = 5000;
+ config->ssc_adj_per = 2;
+ config->thresh_cycles = 32;
+ config->refclk_cycles = 256;
+
+ config->div_override = false;
+ config->ignore_frac = false;
+ config->disable_prescaler = false;
+
+ config->enable_ssc = false;
+ config->ssc_center = 0;
+}
+
+static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll)
+{
+ struct dsi_pll_config *config = &pll->pll_configuration;
+ struct dsi_pll_regs *regs = &pll->reg_setup;
+ u64 fref = pll->vco_ref_clk_rate;
+ u64 pll_freq;
+ u64 divider;
+ u64 dec, dec_multiple;
+ u32 frac;
+ u64 multiplier;
+
+ pll_freq = pll->vco_current_rate;
+
+ if (config->disable_prescaler)
+ divider = fref;
+ else
+ divider = fref * 2;
+
+ multiplier = 1 << config->frac_bits;
+ dec_multiple = div_u64(pll_freq * multiplier, divider);
+ dec = div_u64_rem(dec_multiple, multiplier, &frac);
+
+ if (pll_freq <= 1900000000UL)
+ regs->pll_prop_gain_rate = 8;
+ else if (pll_freq <= 3000000000UL)
+ regs->pll_prop_gain_rate = 10;
+ else
+ regs->pll_prop_gain_rate = 12;
+ if (pll_freq < 1100000000UL)
+ regs->pll_clock_inverters = 8;
+ else
+ regs->pll_clock_inverters = 0;
+
+ regs->pll_lockdet_rate = config->lock_timer;
+ regs->decimal_div_start = dec;
+ regs->frac_div_start_low = (frac & 0xff);
+ regs->frac_div_start_mid = (frac & 0xff00) >> 8;
+ regs->frac_div_start_high = (frac & 0x30000) >> 16;
+}
+
+#define SSC_CENTER BIT(0)
+#define SSC_EN BIT(1)
+
+static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll)
+{
+ struct dsi_pll_config *config = &pll->pll_configuration;
+ struct dsi_pll_regs *regs = &pll->reg_setup;
+ u32 ssc_per;
+ u32 ssc_mod;
+ u64 ssc_step_size;
+ u64 frac;
+
+ if (!config->enable_ssc) {
+ DBG("SSC not enabled\n");
+ return;
+ }
+
+ ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / 2 - 1;
+ ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1);
+ ssc_per -= ssc_mod;
+
+ frac = regs->frac_div_start_low |
+ (regs->frac_div_start_mid << 8) |
+ (regs->frac_div_start_high << 16);
+ ssc_step_size = regs->decimal_div_start;
+ ssc_step_size *= (1 << config->frac_bits);
+ ssc_step_size += frac;
+ ssc_step_size *= config->ssc_offset;
+ ssc_step_size *= (config->ssc_adj_per + 1);
+ ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1));
+ ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000);
+
+ regs->ssc_div_per_low = ssc_per & 0xFF;
+ regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8;
+ regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF);
+ regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8);
+ regs->ssc_adjper_low = config->ssc_adj_per & 0xFF;
+ regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8;
+
+ regs->ssc_control = config->ssc_center ? SSC_CENTER : 0;
+
+ pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n",
+ regs->decimal_div_start, frac, config->frac_bits);
+ pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n",
+ ssc_per, (u32)ssc_step_size, config->ssc_adj_per);
+}
+
+static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll)
+{
+ void __iomem *base = pll->mmio;
+ struct dsi_pll_regs *regs = &pll->reg_setup;
+
+ if (pll->pll_configuration.enable_ssc) {
+ pr_debug("SSC is enabled\n");
+
+ pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_LOW_1,
+ regs->ssc_stepsize_low);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_HIGH_1,
+ regs->ssc_stepsize_high);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_LOW_1,
+ regs->ssc_div_per_low);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_HIGH_1,
+ regs->ssc_div_per_high);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_LOW_1,
+ regs->ssc_adjper_low);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_HIGH_1,
+ regs->ssc_adjper_high);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_CONTROL,
+ SSC_EN | regs->ssc_control);
+ }
+}
+
+static void dsi_pll_config_hzindep_reg(struct dsi_pll_10nm *pll)
+{
+ void __iomem *base = pll->mmio;
+
+ pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_ONE, 0x80);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_TWO, 0x03);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_THREE, 0x00);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_DSM_DIVIDER, 0x00);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_FEEDBACK_DIVIDER, 0x4e);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_CALIBRATION_SETTINGS, 0x40);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_BAND_SEL_CAL_SETTINGS_THREE,
+ 0xba);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_FREQ_DETECT_SETTINGS_ONE, 0x0c);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_OUTDIV, 0x00);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_CORE_OVERRIDE, 0x00);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_DIGITAL_TIMERS_TWO, 0x08);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_PROP_GAIN_RATE_1, 0x08);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_BAND_SET_RATE_1, 0xc0);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_INT_GAIN_IFILT_BAND_1, 0xfa);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_FL_INT_GAIN_PFILT_BAND_1,
+ 0x4c);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCK_OVERRIDE, 0x80);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_PFILT, 0x29);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_IFILT, 0x3f);
+}
+
+static void dsi_pll_commit(struct dsi_pll_10nm *pll)
+{
+ void __iomem *base = pll->mmio;
+ struct dsi_pll_regs *reg = &pll->reg_setup;
+
+ pll_write(base + REG_DSI_10nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_DECIMAL_DIV_START_1,
+ reg->decimal_div_start);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_LOW_1,
+ reg->frac_div_start_low);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_MID_1,
+ reg->frac_div_start_mid);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1,
+ reg->frac_div_start_high);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1,
+ reg->pll_lockdet_rate);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCK_DELAY, 0x06);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_CMODE, 0x10);
+ pll_write(base + REG_DSI_10nm_PHY_PLL_CLOCK_INVERTERS,
+ reg->pll_clock_inverters);
+}
+
+static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+
+ DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_10nm->id, rate,
+ parent_rate);
+
+ pll_10nm->vco_current_rate = rate;
+ pll_10nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;
+
+ dsi_pll_setup_config(pll_10nm);
+
+ dsi_pll_calc_dec_frac(pll_10nm);
+
+ dsi_pll_calc_ssc(pll_10nm);
+
+ dsi_pll_commit(pll_10nm);
+
+ dsi_pll_config_hzindep_reg(pll_10nm);
+
+ dsi_pll_ssc_commit(pll_10nm);
+
+ /* flush, ensure all register writes are done*/
+ wmb();
+
+ return 0;
+}
+
+static int dsi_pll_10nm_lock_status(struct dsi_pll_10nm *pll)
+{
+ struct device *dev = &pll->pdev->dev;
+ int rc;
+ u32 status = 0;
+ u32 const delay_us = 100;
+ u32 const timeout_us = 5000;
+
+ rc = readl_poll_timeout_atomic(pll->mmio +
+ REG_DSI_10nm_PHY_PLL_COMMON_STATUS_ONE,
+ status,
+ ((status & BIT(0)) > 0),
+ delay_us,
+ timeout_us);
+ if (rc)
+ DRM_DEV_ERROR(dev, "DSI PLL(%d) lock failed, status=0x%08x\n",
+ pll->id, status);
+
+ return rc;
+}
+
+static void dsi_pll_disable_pll_bias(struct dsi_pll_10nm *pll)
+{
+ u32 data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0);
+
+ pll_write(pll->mmio + REG_DSI_10nm_PHY_PLL_SYSTEM_MUXES, 0);
+ pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0,
+ data & ~BIT(5));
+ ndelay(250);
+}
+
+static void dsi_pll_enable_pll_bias(struct dsi_pll_10nm *pll)
+{
+ u32 data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0);
+
+ pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0,
+ data | BIT(5));
+ pll_write(pll->mmio + REG_DSI_10nm_PHY_PLL_SYSTEM_MUXES, 0xc0);
+ ndelay(250);
+}
+
+static void dsi_pll_disable_global_clk(struct dsi_pll_10nm *pll)
+{
+ u32 data;
+
+ data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1);
+ pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1,
+ data & ~BIT(5));
+}
+
+static void dsi_pll_enable_global_clk(struct dsi_pll_10nm *pll)
+{
+ u32 data;
+
+ data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1);
+ pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1,
+ data | BIT(5));
+}
+
+static int dsi_pll_10nm_vco_prepare(struct clk_hw *hw)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+ struct device *dev = &pll_10nm->pdev->dev;
+ int rc;
+
+ dsi_pll_enable_pll_bias(pll_10nm);
+ if (pll_10nm->slave)
+ dsi_pll_enable_pll_bias(pll_10nm->slave);
+
+ rc = dsi_pll_10nm_vco_set_rate(hw,pll_10nm->vco_current_rate, 0);
+ if (rc) {
+ DRM_DEV_ERROR(dev, "vco_set_rate failed, rc=%d\n", rc);
+ return rc;
+ }
+
+ /* Start PLL */
+ pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_PLL_CNTRL,
+ 0x01);
+
+ /*
+ * ensure all PLL configurations are written prior to checking
+ * for PLL lock.
+ */
+ wmb();
+
+ /* Check for PLL lock */
+ rc = dsi_pll_10nm_lock_status(pll_10nm);
+ if (rc) {
+ DRM_DEV_ERROR(dev, "PLL(%d) lock failed\n", pll_10nm->id);
+ goto error;
+ }
+
+ pll->pll_on = true;
+
+ dsi_pll_enable_global_clk(pll_10nm);
+ if (pll_10nm->slave)
+ dsi_pll_enable_global_clk(pll_10nm->slave);
+
+ pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_RBUF_CTRL,
+ 0x01);
+ if (pll_10nm->slave)
+ pll_write(pll_10nm->slave->phy_cmn_mmio +
+ REG_DSI_10nm_PHY_CMN_RBUF_CTRL, 0x01);
+
+error:
+ return rc;
+}
+
+static void dsi_pll_disable_sub(struct dsi_pll_10nm *pll)
+{
+ pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_RBUF_CTRL, 0);
+ dsi_pll_disable_pll_bias(pll);
+}
+
+static void dsi_pll_10nm_vco_unprepare(struct clk_hw *hw)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+
+ /*
+ * To avoid any stray glitches while abruptly powering down the PLL
+ * make sure to gate the clock using the clock enable bit before
+ * powering down the PLL
+ */
+ dsi_pll_disable_global_clk(pll_10nm);
+ pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_PLL_CNTRL, 0);
+ dsi_pll_disable_sub(pll_10nm);
+ if (pll_10nm->slave) {
+ dsi_pll_disable_global_clk(pll_10nm->slave);
+ dsi_pll_disable_sub(pll_10nm->slave);
+ }
+ /* flush, ensure all register writes are done */
+ wmb();
+ pll->pll_on = false;
+}
+
+static unsigned long dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+ struct dsi_pll_config *config = &pll_10nm->pll_configuration;
+ void __iomem *base = pll_10nm->mmio;
+ u64 ref_clk = pll_10nm->vco_ref_clk_rate;
+ u64 vco_rate = 0x0;
+ u64 multiplier;
+ u32 frac;
+ u32 dec;
+ u64 pll_freq, tmp64;
+
+ dec = pll_read(base + REG_DSI_10nm_PHY_PLL_DECIMAL_DIV_START_1);
+ dec &= 0xff;
+
+ frac = pll_read(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_LOW_1);
+ frac |= ((pll_read(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_MID_1) &
+ 0xff) << 8);
+ frac |= ((pll_read(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1) &
+ 0x3) << 16);
+
+ /*
+ * TODO:
+ * 1. Assumes prescaler is disabled
+ */
+ multiplier = 1 << config->frac_bits;
+ pll_freq = dec * (ref_clk * 2);
+ tmp64 = (ref_clk * 2 * frac);
+ pll_freq += div_u64(tmp64, multiplier);
+
+ vco_rate = pll_freq;
+
+ DBG("DSI PLL%d returning vco rate = %lu, dec = %x, frac = %x",
+ pll_10nm->id, (unsigned long)vco_rate, dec, frac);
+
+ return (unsigned long)vco_rate;
+}
+
+static const struct clk_ops clk_ops_dsi_pll_10nm_vco = {
+ .round_rate = msm_dsi_pll_helper_clk_round_rate,
+ .set_rate = dsi_pll_10nm_vco_set_rate,
+ .recalc_rate = dsi_pll_10nm_vco_recalc_rate,
+ .prepare = dsi_pll_10nm_vco_prepare,
+ .unprepare = dsi_pll_10nm_vco_unprepare,
+};
+
+/*
+ * PLL Callbacks
+ */
+
+static void dsi_pll_10nm_save_state(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+ struct pll_10nm_cached_state *cached = &pll_10nm->cached_state;
+ void __iomem *phy_base = pll_10nm->phy_cmn_mmio;
+ u32 cmn_clk_cfg0, cmn_clk_cfg1;
+
+ cached->pll_out_div = pll_read(pll_10nm->mmio +
+ REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE);
+ cached->pll_out_div &= 0x3;
+
+ cmn_clk_cfg0 = pll_read(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG0);
+ cached->bit_clk_div = cmn_clk_cfg0 & 0xf;
+ cached->pix_clk_div = (cmn_clk_cfg0 & 0xf0) >> 4;
+
+ cmn_clk_cfg1 = pll_read(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1);
+ cached->pll_mux = cmn_clk_cfg1 & 0x3;
+
+ DBG("DSI PLL%d outdiv %x bit_clk_div %x pix_clk_div %x pll_mux %x",
+ pll_10nm->id, cached->pll_out_div, cached->bit_clk_div,
+ cached->pix_clk_div, cached->pll_mux);
+}
+
+static int dsi_pll_10nm_restore_state(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+ struct pll_10nm_cached_state *cached = &pll_10nm->cached_state;
+ void __iomem *phy_base = pll_10nm->phy_cmn_mmio;
+ u32 val;
+ int ret;
+
+ val = pll_read(pll_10nm->mmio + REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE);
+ val &= ~0x3;
+ val |= cached->pll_out_div;
+ pll_write(pll_10nm->mmio + REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE, val);
+
+ pll_write(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG0,
+ cached->bit_clk_div | (cached->pix_clk_div << 4));
+
+ val = pll_read(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1);
+ val &= ~0x3;
+ val |= cached->pll_mux;
+ pll_write(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1, val);
+
+ ret = dsi_pll_10nm_vco_set_rate(&pll->clk_hw, pll_10nm->vco_current_rate, pll_10nm->vco_ref_clk_rate);
+ if (ret) {
+ DRM_DEV_ERROR(&pll_10nm->pdev->dev,
+ "restore vco rate failed. ret=%d\n", ret);
+ return ret;
+ }
+
+ DBG("DSI PLL%d", pll_10nm->id);
+
+ return 0;
+}
+
+static int dsi_pll_10nm_set_usecase(struct msm_dsi_pll *pll,
+ enum msm_dsi_phy_usecase uc)
+{
+ struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+ void __iomem *base = pll_10nm->phy_cmn_mmio;
+ u32 data = 0x0; /* internal PLL */
+
+ DBG("DSI PLL%d", pll_10nm->id);
+
+ switch (uc) {
+ case MSM_DSI_PHY_STANDALONE:
+ break;
+ case MSM_DSI_PHY_MASTER:
+ pll_10nm->slave = pll_10nm_list[(pll_10nm->id + 1) % DSI_MAX];
+ break;
+ case MSM_DSI_PHY_SLAVE:
+ data = 0x1; /* external PLL */
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* set PLL src */
+ pll_write(base + REG_DSI_10nm_PHY_CMN_CLK_CFG1, (data << 2));
+
+ pll_10nm->uc = uc;
+
+ return 0;
+}
+
+static int dsi_pll_10nm_get_provider(struct msm_dsi_pll *pll,
+ struct clk **byte_clk_provider,
+ struct clk **pixel_clk_provider)
+{
+ struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+ struct clk_hw_onecell_data *hw_data = pll_10nm->hw_data;
+
+ DBG("DSI PLL%d", pll_10nm->id);
+
+ if (byte_clk_provider)
+ *byte_clk_provider = hw_data->hws[DSI_BYTE_PLL_CLK]->clk;
+ if (pixel_clk_provider)
+ *pixel_clk_provider = hw_data->hws[DSI_PIXEL_PLL_CLK]->clk;
+
+ return 0;
+}
+
+static void dsi_pll_10nm_destroy(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+ struct device *dev = &pll_10nm->pdev->dev;
+
+ DBG("DSI PLL%d", pll_10nm->id);
+ of_clk_del_provider(dev->of_node);
+
+ clk_hw_unregister_divider(pll_10nm->out_dsiclk_hw);
+ clk_hw_unregister_mux(pll_10nm->pclk_mux_hw);
+ clk_hw_unregister_fixed_factor(pll_10nm->post_out_div_clk_hw);
+ clk_hw_unregister_fixed_factor(pll_10nm->by_2_bit_clk_hw);
+ clk_hw_unregister_fixed_factor(pll_10nm->byte_clk_hw);
+ clk_hw_unregister_divider(pll_10nm->bit_clk_hw);
+ clk_hw_unregister_divider(pll_10nm->out_div_clk_hw);
+ clk_hw_unregister(&pll_10nm->base.clk_hw);
+}
+
+/*
+ * The post dividers and mux clocks are created using the standard divider and
+ * mux API. Unlike the 14nm PHY, the slave PLL doesn't need its dividers/mux
+ * state to follow the master PLL's divider/mux state. Therefore, we don't
+ * require special clock ops that also configure the slave PLL registers
+ */
+static int pll_10nm_register(struct dsi_pll_10nm *pll_10nm)
+{
+ char clk_name[32], parent[32], vco_name[32];
+ char parent2[32], parent3[32], parent4[32];
+ struct clk_init_data vco_init = {
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .name = vco_name,
+ .flags = CLK_IGNORE_UNUSED,
+ .ops = &clk_ops_dsi_pll_10nm_vco,
+ };
+ struct device *dev = &pll_10nm->pdev->dev;
+ struct clk_hw_onecell_data *hw_data;
+ struct clk_hw *hw;
+ int ret;
+
+ DBG("DSI%d", pll_10nm->id);
+
+ hw_data = devm_kzalloc(dev, sizeof(*hw_data) +
+ NUM_PROVIDED_CLKS * sizeof(struct clk_hw *),
+ GFP_KERNEL);
+ if (!hw_data)
+ return -ENOMEM;
+
+ snprintf(vco_name, 32, "dsi%dvco_clk", pll_10nm->id);
+ pll_10nm->base.clk_hw.init = &vco_init;
+
+ ret = clk_hw_register(dev, &pll_10nm->base.clk_hw);
+ if (ret)
+ return ret;
+
+ snprintf(clk_name, 32, "dsi%d_pll_out_div_clk", pll_10nm->id);
+ snprintf(parent, 32, "dsi%dvco_clk", pll_10nm->id);
+
+ hw = clk_hw_register_divider(dev, clk_name,
+ parent, CLK_SET_RATE_PARENT,
+ pll_10nm->mmio +
+ REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE,
+ 0, 2, CLK_DIVIDER_POWER_OF_TWO, NULL);
+ if (IS_ERR(hw)) {
+ ret = PTR_ERR(hw);
+ goto err_base_clk_hw;
+ }
+
+ pll_10nm->out_div_clk_hw = hw;
+
+ snprintf(clk_name, 32, "dsi%d_pll_bit_clk", pll_10nm->id);
+ snprintf(parent, 32, "dsi%d_pll_out_div_clk", pll_10nm->id);
+
+ /* BIT CLK: DIV_CTRL_3_0 */
+ hw = clk_hw_register_divider(dev, clk_name, parent,
+ CLK_SET_RATE_PARENT,
+ pll_10nm->phy_cmn_mmio +
+ REG_DSI_10nm_PHY_CMN_CLK_CFG0,
+ 0, 4, CLK_DIVIDER_ONE_BASED,
+ &pll_10nm->postdiv_lock);
+ if (IS_ERR(hw)) {
+ ret = PTR_ERR(hw);
+ goto err_out_div_clk_hw;
+ }
+
+ pll_10nm->bit_clk_hw = hw;
+
+ snprintf(clk_name, 32, "dsi%d_phy_pll_out_byteclk", pll_10nm->id);
+ snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_10nm->id);
+
+ /* DSI Byte clock = VCO_CLK / OUT_DIV / BIT_DIV / 8 */
+ hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
+ CLK_SET_RATE_PARENT, 1, 8);
+ if (IS_ERR(hw)) {
+ ret = PTR_ERR(hw);
+ goto err_bit_clk_hw;
+ }
+
+ pll_10nm->byte_clk_hw = hw;
+ hw_data->hws[DSI_BYTE_PLL_CLK] = hw;
+
+ snprintf(clk_name, 32, "dsi%d_pll_by_2_bit_clk", pll_10nm->id);
+ snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_10nm->id);
+
+ hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
+ 0, 1, 2);
+ if (IS_ERR(hw)) {
+ ret = PTR_ERR(hw);
+ goto err_byte_clk_hw;
+ }
+
+ pll_10nm->by_2_bit_clk_hw = hw;
+
+ snprintf(clk_name, 32, "dsi%d_pll_post_out_div_clk", pll_10nm->id);
+ snprintf(parent, 32, "dsi%d_pll_out_div_clk", pll_10nm->id);
+
+ hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
+ 0, 1, 4);
+ if (IS_ERR(hw)) {
+ ret = PTR_ERR(hw);
+ goto err_by_2_bit_clk_hw;
+ }
+
+ pll_10nm->post_out_div_clk_hw = hw;
+
+ snprintf(clk_name, 32, "dsi%d_pclk_mux", pll_10nm->id);
+ snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_10nm->id);
+ snprintf(parent2, 32, "dsi%d_pll_by_2_bit_clk", pll_10nm->id);
+ snprintf(parent3, 32, "dsi%d_pll_out_div_clk", pll_10nm->id);
+ snprintf(parent4, 32, "dsi%d_pll_post_out_div_clk", pll_10nm->id);
+
+ hw = clk_hw_register_mux(dev, clk_name,
+ ((const char *[]){
+ parent, parent2, parent3, parent4
+ }), 4, 0, pll_10nm->phy_cmn_mmio +
+ REG_DSI_10nm_PHY_CMN_CLK_CFG1,
+ 0, 2, 0, NULL);
+ if (IS_ERR(hw)) {
+ ret = PTR_ERR(hw);
+ goto err_post_out_div_clk_hw;
+ }
+
+ pll_10nm->pclk_mux_hw = hw;
+
+ snprintf(clk_name, 32, "dsi%d_phy_pll_out_dsiclk", pll_10nm->id);
+ snprintf(parent, 32, "dsi%d_pclk_mux", pll_10nm->id);
+
+ /* PIX CLK DIV : DIV_CTRL_7_4*/
+ hw = clk_hw_register_divider(dev, clk_name, parent,
+ 0, pll_10nm->phy_cmn_mmio +
+ REG_DSI_10nm_PHY_CMN_CLK_CFG0,
+ 4, 4, CLK_DIVIDER_ONE_BASED,
+ &pll_10nm->postdiv_lock);
+ if (IS_ERR(hw)) {
+ ret = PTR_ERR(hw);
+ goto err_pclk_mux_hw;
+ }
+
+ pll_10nm->out_dsiclk_hw = hw;
+ hw_data->hws[DSI_PIXEL_PLL_CLK] = hw;
+
+ hw_data->num = NUM_PROVIDED_CLKS;
+ pll_10nm->hw_data = hw_data;
+
+ ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+ pll_10nm->hw_data);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret);
+ goto err_dsiclk_hw;
+ }
+
+ return 0;
+
+err_dsiclk_hw:
+ clk_hw_unregister_divider(pll_10nm->out_dsiclk_hw);
+err_pclk_mux_hw:
+ clk_hw_unregister_mux(pll_10nm->pclk_mux_hw);
+err_post_out_div_clk_hw:
+ clk_hw_unregister_fixed_factor(pll_10nm->post_out_div_clk_hw);
+err_by_2_bit_clk_hw:
+ clk_hw_unregister_fixed_factor(pll_10nm->by_2_bit_clk_hw);
+err_byte_clk_hw:
+ clk_hw_unregister_fixed_factor(pll_10nm->byte_clk_hw);
+err_bit_clk_hw:
+ clk_hw_unregister_divider(pll_10nm->bit_clk_hw);
+err_out_div_clk_hw:
+ clk_hw_unregister_divider(pll_10nm->out_div_clk_hw);
+err_base_clk_hw:
+ clk_hw_unregister(&pll_10nm->base.clk_hw);
+
+ return ret;
+}
+
+struct msm_dsi_pll *msm_dsi_pll_10nm_init(struct platform_device *pdev, int id)
+{
+ struct dsi_pll_10nm *pll_10nm;
+ struct msm_dsi_pll *pll;
+ int ret;
+
+ pll_10nm = devm_kzalloc(&pdev->dev, sizeof(*pll_10nm), GFP_KERNEL);
+ if (!pll_10nm)
+ return ERR_PTR(-ENOMEM);
+
+ DBG("DSI PLL%d", id);
+
+ pll_10nm->pdev = pdev;
+ pll_10nm->id = id;
+ pll_10nm_list[id] = pll_10nm;
+
+ pll_10nm->phy_cmn_mmio = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
+ if (IS_ERR_OR_NULL(pll_10nm->phy_cmn_mmio)) {
+ DRM_DEV_ERROR(&pdev->dev, "failed to map CMN PHY base\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ pll_10nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL");
+ if (IS_ERR_OR_NULL(pll_10nm->mmio)) {
+ DRM_DEV_ERROR(&pdev->dev, "failed to map PLL base\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ spin_lock_init(&pll_10nm->postdiv_lock);
+
+ pll = &pll_10nm->base;
+ pll->min_rate = 1000000000UL;
+ pll->max_rate = 3500000000UL;
+ pll->get_provider = dsi_pll_10nm_get_provider;
+ pll->destroy = dsi_pll_10nm_destroy;
+ pll->save_state = dsi_pll_10nm_save_state;
+ pll->restore_state = dsi_pll_10nm_restore_state;
+ pll->set_usecase = dsi_pll_10nm_set_usecase;
+
+ pll_10nm->vco_delay = 1;
+
+ ret = pll_10nm_register(pll_10nm);
+ if (ret) {
+ DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
+ return ERR_PTR(ret);
+ }
+
+ /* TODO: Remove this when we have proper display handover support */
+ msm_dsi_pll_save_state(pll);
+
+ return pll;
+}
+
static int dsi_phy_hw_v3_0_is_pll_on(struct msm_dsi_phy *phy)
{
void __iomem *base = phy->base;
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
index 519400501bcd..4cf289ff8d7e 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
@@ -3,13 +3,1102 @@
* Copyright (c) 2016, The Linux Foundation. All rights reserved.
*/
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/delay.h>
#include "dsi_phy.h"
+#include "dsi_pll.h"
#include "dsi.xml.h"
#define PHY_14NM_CKLN_IDX 4
+/*
+ * DSI PLL 14nm - clock diagram (eg: DSI0):
+ *
+ * dsi0n1_postdiv_clk
+ * |
+ * |
+ * +----+ | +----+
+ * dsi0vco_clk ---| n1 |--o--| /8 |-- dsi0pllbyte
+ * +----+ | +----+
+ * | dsi0n1_postdivby2_clk
+ * | +----+ |
+ * o---| /2 |--o--|\
+ * | +----+ | \ +----+
+ * | | |--| n2 |-- dsi0pll
+ * o--------------| / +----+
+ * |/
+ */
+
+#define POLL_MAX_READS 15
+#define POLL_TIMEOUT_US 1000
+
+#define NUM_PROVIDED_CLKS 2
+
+#define VCO_REF_CLK_RATE 19200000
+#define VCO_MIN_RATE 1300000000UL
+#define VCO_MAX_RATE 2600000000UL
+
+#define DSI_BYTE_PLL_CLK 0
+#define DSI_PIXEL_PLL_CLK 1
+
+#define DSI_PLL_DEFAULT_VCO_POSTDIV 1
+
+struct dsi_pll_input {
+ u32 fref; /* reference clk */
+ u32 fdata; /* bit clock rate */
+ u32 dsiclk_sel; /* Mux configuration (see diagram) */
+ u32 ssc_en; /* SSC enable/disable */
+ u32 ldo_en;
+
+ /* fixed params */
+ u32 refclk_dbler_en;
+ u32 vco_measure_time;
+ u32 kvco_measure_time;
+ u32 bandgap_timer;
+ u32 pll_wakeup_timer;
+ u32 plllock_cnt;
+ u32 plllock_rng;
+ u32 ssc_center;
+ u32 ssc_adj_period;
+ u32 ssc_spread;
+ u32 ssc_freq;
+ u32 pll_ie_trim;
+ u32 pll_ip_trim;
+ u32 pll_iptat_trim;
+ u32 pll_cpcset_cur;
+ u32 pll_cpmset_cur;
+
+ u32 pll_icpmset;
+ u32 pll_icpcset;
+
+ u32 pll_icpmset_p;
+ u32 pll_icpmset_m;
+
+ u32 pll_icpcset_p;
+ u32 pll_icpcset_m;
+
+ u32 pll_lpf_res1;
+ u32 pll_lpf_cap1;
+ u32 pll_lpf_cap2;
+ u32 pll_c3ctrl;
+ u32 pll_r3ctrl;
+};
+
+struct dsi_pll_output {
+ u32 pll_txclk_en;
+ u32 dec_start;
+ u32 div_frac_start;
+ u32 ssc_period;
+ u32 ssc_step_size;
+ u32 plllock_cmp;
+ u32 pll_vco_div_ref;
+ u32 pll_vco_count;
+ u32 pll_kvco_div_ref;
+ u32 pll_kvco_count;
+ u32 pll_misc1;
+ u32 pll_lpf2_postdiv;
+ u32 pll_resetsm_cntrl;
+ u32 pll_resetsm_cntrl2;
+ u32 pll_resetsm_cntrl5;
+ u32 pll_kvco_code;
+
+ u32 cmn_clk_cfg0;
+ u32 cmn_clk_cfg1;
+ u32 cmn_ldo_cntrl;
+
+ u32 pll_postdiv;
+ u32 fcvo;
+};
+
+struct pll_14nm_cached_state {
+ unsigned long vco_rate;
+ u8 n2postdiv;
+ u8 n1postdiv;
+};
+
+struct dsi_pll_14nm {
+ struct msm_dsi_pll base;
+
+ int id;
+ struct platform_device *pdev;
+
+ void __iomem *phy_cmn_mmio;
+ void __iomem *mmio;
+
+ int vco_delay;
+
+ struct dsi_pll_input in;
+ struct dsi_pll_output out;
+
+ /* protects REG_DSI_14nm_PHY_CMN_CLK_CFG0 register */
+ spinlock_t postdiv_lock;
+
+ u64 vco_current_rate;
+ u64 vco_ref_clk_rate;
+
+ /* private clocks: */
+ struct clk_hw *hws[NUM_DSI_CLOCKS_MAX];
+ u32 num_hws;
+
+ /* clock-provider: */
+ struct clk_hw_onecell_data *hw_data;
+
+ struct pll_14nm_cached_state cached_state;
+
+ enum msm_dsi_phy_usecase uc;
+ struct dsi_pll_14nm *slave;
+};
+
+#define to_pll_14nm(x) container_of(x, struct dsi_pll_14nm, base)
+
+/*
+ * Private struct for N1/N2 post-divider clocks. These clocks are similar to
+ * the generic clk_divider class of clocks. The only difference is that it
+ * also sets the slave DSI PLL's post-dividers if in Dual DSI mode
+ */
+struct dsi_pll_14nm_postdiv {
+ struct clk_hw hw;
+
+ /* divider params */
+ u8 shift;
+ u8 width;
+ u8 flags; /* same flags as used by clk_divider struct */
+
+ struct dsi_pll_14nm *pll;
+};
+
+#define to_pll_14nm_postdiv(_hw) container_of(_hw, struct dsi_pll_14nm_postdiv, hw)
+
+/*
+ * Global list of private DSI PLL struct pointers. We need this for Dual DSI
+ * mode, where the master PLL's clk_ops needs access the slave's private data
+ */
+static struct dsi_pll_14nm *pll_14nm_list[DSI_MAX];
+
+static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm,
+ u32 nb_tries, u32 timeout_us)
+{
+ bool pll_locked = false;
+ void __iomem *base = pll_14nm->mmio;
+ u32 tries, val;
+
+ tries = nb_tries;
+ while (tries--) {
+ val = pll_read(base +
+ REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS);
+ pll_locked = !!(val & BIT(5));
+
+ if (pll_locked)
+ break;
+
+ udelay(timeout_us);
+ }
+
+ if (!pll_locked) {
+ tries = nb_tries;
+ while (tries--) {
+ val = pll_read(base +
+ REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS);
+ pll_locked = !!(val & BIT(0));
+
+ if (pll_locked)
+ break;
+
+ udelay(timeout_us);
+ }
+ }
+
+ DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* ");
+
+ return pll_locked;
+}
+
+static void dsi_pll_14nm_input_init(struct dsi_pll_14nm *pll)
+{
+ pll->in.fref = pll->vco_ref_clk_rate;
+ pll->in.fdata = 0;
+ pll->in.dsiclk_sel = 1; /* Use the /2 path in Mux */
+ pll->in.ldo_en = 0; /* disabled for now */
+
+ /* fixed input */
+ pll->in.refclk_dbler_en = 0;
+ pll->in.vco_measure_time = 5;
+ pll->in.kvco_measure_time = 5;
+ pll->in.bandgap_timer = 4;
+ pll->in.pll_wakeup_timer = 5;
+ pll->in.plllock_cnt = 1;
+ pll->in.plllock_rng = 0;
+
+ /*
+ * SSC is enabled by default. We might need DT props for configuring
+ * some SSC params like PPM and center/down spread etc.
+ */
+ pll->in.ssc_en = 1;
+ pll->in.ssc_center = 0; /* down spread by default */
+ pll->in.ssc_spread = 5; /* PPM / 1000 */
+ pll->in.ssc_freq = 31500; /* default recommended */
+ pll->in.ssc_adj_period = 37;
+
+ pll->in.pll_ie_trim = 4;
+ pll->in.pll_ip_trim = 4;
+ pll->in.pll_cpcset_cur = 1;
+ pll->in.pll_cpmset_cur = 1;
+ pll->in.pll_icpmset = 4;
+ pll->in.pll_icpcset = 4;
+ pll->in.pll_icpmset_p = 0;
+ pll->in.pll_icpmset_m = 0;
+ pll->in.pll_icpcset_p = 0;
+ pll->in.pll_icpcset_m = 0;
+ pll->in.pll_lpf_res1 = 3;
+ pll->in.pll_lpf_cap1 = 11;
+ pll->in.pll_lpf_cap2 = 1;
+ pll->in.pll_iptat_trim = 7;
+ pll->in.pll_c3ctrl = 2;
+ pll->in.pll_r3ctrl = 1;
+}
+
+#define CEIL(x, y) (((x) + ((y) - 1)) / (y))
+
+static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll)
+{
+ u32 period, ssc_period;
+ u32 ref, rem;
+ u64 step_size;
+
+ DBG("vco=%lld ref=%lld", pll->vco_current_rate, pll->vco_ref_clk_rate);
+
+ ssc_period = pll->in.ssc_freq / 500;
+ period = (u32)pll->vco_ref_clk_rate / 1000;
+ ssc_period = CEIL(period, ssc_period);
+ ssc_period -= 1;
+ pll->out.ssc_period = ssc_period;
+
+ DBG("ssc freq=%d spread=%d period=%d", pll->in.ssc_freq,
+ pll->in.ssc_spread, pll->out.ssc_period);
+
+ step_size = (u32)pll->vco_current_rate;
+ ref = pll->vco_ref_clk_rate;
+ ref /= 1000;
+ step_size = div_u64(step_size, ref);
+ step_size <<= 20;
+ step_size = div_u64(step_size, 1000);
+ step_size *= pll->in.ssc_spread;
+ step_size = div_u64(step_size, 1000);
+ step_size *= (pll->in.ssc_adj_period + 1);
+
+ rem = 0;
+ step_size = div_u64_rem(step_size, ssc_period + 1, &rem);
+ if (rem)
+ step_size++;
+
+ DBG("step_size=%lld", step_size);
+
+ step_size &= 0x0ffff; /* take lower 16 bits */
+
+ pll->out.ssc_step_size = step_size;
+}
+
+static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll)
+{
+ struct dsi_pll_input *pin = &pll->in;
+ struct dsi_pll_output *pout = &pll->out;
+ u64 multiplier = BIT(20);
+ u64 dec_start_multiple, dec_start, pll_comp_val;
+ u32 duration, div_frac_start;
+ u64 vco_clk_rate = pll->vco_current_rate;
+ u64 fref = pll->vco_ref_clk_rate;
+
+ DBG("vco_clk_rate=%lld ref_clk_rate=%lld", vco_clk_rate, fref);
+
+ dec_start_multiple = div_u64(vco_clk_rate * multiplier, fref);
+ div_u64_rem(dec_start_multiple, multiplier, &div_frac_start);
+
+ dec_start = div_u64(dec_start_multiple, multiplier);
+
+ pout->dec_start = (u32)dec_start;
+ pout->div_frac_start = div_frac_start;
+
+ if (pin->plllock_cnt == 0)
+ duration = 1024;
+ else if (pin->plllock_cnt == 1)
+ duration = 256;
+ else if (pin->plllock_cnt == 2)
+ duration = 128;
+ else
+ duration = 32;
+
+ pll_comp_val = duration * dec_start_multiple;
+ pll_comp_val = div_u64(pll_comp_val, multiplier);
+ do_div(pll_comp_val, 10);
+
+ pout->plllock_cmp = (u32)pll_comp_val;
+
+ pout->pll_txclk_en = 1;
+ pout->cmn_ldo_cntrl = 0x3c;
+}
+
+static u32 pll_14nm_kvco_slop(u32 vrate)
+{
+ u32 slop = 0;
+
+ if (vrate > VCO_MIN_RATE && vrate <= 1800000000UL)
+ slop = 600;
+ else if (vrate > 1800000000UL && vrate < 2300000000UL)
+ slop = 400;
+ else if (vrate > 2300000000UL && vrate < VCO_MAX_RATE)
+ slop = 280;
+
+ return slop;
+}
+
+static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll)
+{
+ struct dsi_pll_input *pin = &pll->in;
+ struct dsi_pll_output *pout = &pll->out;
+ u64 vco_clk_rate = pll->vco_current_rate;
+ u64 fref = pll->vco_ref_clk_rate;
+ u64 data;
+ u32 cnt;
+
+ data = fref * pin->vco_measure_time;
+ do_div(data, 1000000);
+ data &= 0x03ff; /* 10 bits */
+ data -= 2;
+ pout->pll_vco_div_ref = data;
+
+ data = div_u64(vco_clk_rate, 1000000); /* unit is Mhz */
+ data *= pin->vco_measure_time;
+ do_div(data, 10);
+ pout->pll_vco_count = data;
+
+ data = fref * pin->kvco_measure_time;
+ do_div(data, 1000000);
+ data &= 0x03ff; /* 10 bits */
+ data -= 1;
+ pout->pll_kvco_div_ref = data;
+
+ cnt = pll_14nm_kvco_slop(vco_clk_rate);
+ cnt *= 2;
+ cnt /= 100;
+ cnt *= pin->kvco_measure_time;
+ pout->pll_kvco_count = cnt;
+
+ pout->pll_misc1 = 16;
+ pout->pll_resetsm_cntrl = 48;
+ pout->pll_resetsm_cntrl2 = pin->bandgap_timer << 3;
+ pout->pll_resetsm_cntrl5 = pin->pll_wakeup_timer;
+ pout->pll_kvco_code = 0;
+}
+
+static void pll_db_commit_ssc(struct dsi_pll_14nm *pll)
+{
+ void __iomem *base = pll->mmio;
+ struct dsi_pll_input *pin = &pll->in;
+ struct dsi_pll_output *pout = &pll->out;
+ u8 data;
+
+ data = pin->ssc_adj_period;
+ data &= 0x0ff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER1, data);
+ data = (pin->ssc_adj_period >> 8);
+ data &= 0x03;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER2, data);
+
+ data = pout->ssc_period;
+ data &= 0x0ff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER1, data);
+ data = (pout->ssc_period >> 8);
+ data &= 0x0ff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER2, data);
+
+ data = pout->ssc_step_size;
+ data &= 0x0ff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE1, data);
+ data = (pout->ssc_step_size >> 8);
+ data &= 0x0ff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE2, data);
+
+ data = (pin->ssc_center & 0x01);
+ data <<= 1;
+ data |= 0x01; /* enable */
+ pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_EN_CENTER, data);
+
+ wmb(); /* make sure register committed */
+}
+
+static void pll_db_commit_common(struct dsi_pll_14nm *pll,
+ struct dsi_pll_input *pin,
+ struct dsi_pll_output *pout)
+{
+ void __iomem *base = pll->mmio;
+ u8 data;
+
+ /* confgiure the non frequency dependent pll registers */
+ data = 0;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_SYSCLK_EN_RESET, data);
+
+ data = pout->pll_txclk_en;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, data);
+
+ data = pout->pll_resetsm_cntrl;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, data);
+ data = pout->pll_resetsm_cntrl2;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, data);
+ data = pout->pll_resetsm_cntrl5;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, data);
+
+ data = pout->pll_vco_div_ref & 0xff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF1, data);
+ data = (pout->pll_vco_div_ref >> 8) & 0x3;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF2, data);
+
+ data = pout->pll_kvco_div_ref & 0xff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF1, data);
+ data = (pout->pll_kvco_div_ref >> 8) & 0x3;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF2, data);
+
+ data = pout->pll_misc1;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, data);
+
+ data = pin->pll_ie_trim;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, data);
+
+ data = pin->pll_ip_trim;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, data);
+
+ data = pin->pll_cpmset_cur << 3 | pin->pll_cpcset_cur;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, data);
+
+ data = pin->pll_icpcset_p << 3 | pin->pll_icpcset_m;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, data);
+
+ data = pin->pll_icpmset_p << 3 | pin->pll_icpcset_m;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, data);
+
+ data = pin->pll_icpmset << 3 | pin->pll_icpcset;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, data);
+
+ data = pin->pll_lpf_cap2 << 4 | pin->pll_lpf_cap1;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, data);
+
+ data = pin->pll_iptat_trim;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, data);
+
+ data = pin->pll_c3ctrl | pin->pll_r3ctrl << 4;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, data);
+}
+
+static void pll_14nm_software_reset(struct dsi_pll_14nm *pll_14nm)
+{
+ void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
+
+ /* de assert pll start and apply pll sw reset */
+
+ /* stop pll */
+ pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 0);
+
+ /* pll sw reset */
+ pll_write_udelay(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_1, 0x20, 10);
+ wmb(); /* make sure register committed */
+
+ pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_1, 0);
+ wmb(); /* make sure register committed */
+}
+
+static void pll_db_commit_14nm(struct dsi_pll_14nm *pll,
+ struct dsi_pll_input *pin,
+ struct dsi_pll_output *pout)
+{
+ void __iomem *base = pll->mmio;
+ void __iomem *cmn_base = pll->phy_cmn_mmio;
+ u8 data;
+
+ DBG("DSI%d PLL", pll->id);
+
+ data = pout->cmn_ldo_cntrl;
+ pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, data);
+
+ pll_db_commit_common(pll, pin, pout);
+
+ pll_14nm_software_reset(pll);
+
+ data = pin->dsiclk_sel; /* set dsiclk_sel = 1 */
+ pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, data);
+
+ data = 0xff; /* data, clk, pll normal operation */
+ pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_0, data);
+
+ /* configure the frequency dependent pll registers */
+ data = pout->dec_start;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_DEC_START, data);
+
+ data = pout->div_frac_start & 0xff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1, data);
+ data = (pout->div_frac_start >> 8) & 0xff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2, data);
+ data = (pout->div_frac_start >> 16) & 0xf;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3, data);
+
+ data = pout->plllock_cmp & 0xff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP1, data);
+
+ data = (pout->plllock_cmp >> 8) & 0xff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP2, data);
+
+ data = (pout->plllock_cmp >> 16) & 0x3;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP3, data);
+
+ data = pin->plllock_cnt << 1 | pin->plllock_rng << 3;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP_EN, data);
+
+ data = pout->pll_vco_count & 0xff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT1, data);
+ data = (pout->pll_vco_count >> 8) & 0xff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT2, data);
+
+ data = pout->pll_kvco_count & 0xff;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT1, data);
+ data = (pout->pll_kvco_count >> 8) & 0x3;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT2, data);
+
+ data = (pout->pll_postdiv - 1) << 4 | pin->pll_lpf_res1;
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, data);
+
+ if (pin->ssc_en)
+ pll_db_commit_ssc(pll);
+
+ wmb(); /* make sure register committed */
+}
+
+/*
+ * VCO clock Callbacks
+ */
+static int dsi_pll_14nm_vco_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
+ struct dsi_pll_input *pin = &pll_14nm->in;
+ struct dsi_pll_output *pout = &pll_14nm->out;
+
+ DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_14nm->id, rate,
+ parent_rate);
+
+ pll_14nm->vco_current_rate = rate;
+ pll_14nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;
+
+ dsi_pll_14nm_input_init(pll_14nm);
+
+ /*
+ * This configures the post divider internal to the VCO. It's
+ * fixed to divide by 1 for now.
+ *
+ * tx_band = pll_postdiv.
+ * 0: divided by 1
+ * 1: divided by 2
+ * 2: divided by 4
+ * 3: divided by 8
+ */
+ pout->pll_postdiv = DSI_PLL_DEFAULT_VCO_POSTDIV;
+
+ pll_14nm_dec_frac_calc(pll_14nm);
+
+ if (pin->ssc_en)
+ pll_14nm_ssc_calc(pll_14nm);
+
+ pll_14nm_calc_vco_count(pll_14nm);
+
+ /* commit the slave DSI PLL registers if we're master. Note that we
+ * don't lock the slave PLL. We just ensure that the PLL/PHY registers
+ * of the master and slave are identical
+ */
+ if (pll_14nm->uc == MSM_DSI_PHY_MASTER) {
+ struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
+
+ pll_db_commit_14nm(pll_14nm_slave, pin, pout);
+ }
+
+ pll_db_commit_14nm(pll_14nm, pin, pout);
+
+ return 0;
+}
+
+static unsigned long dsi_pll_14nm_vco_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
+ void __iomem *base = pll_14nm->mmio;
+ u64 vco_rate, multiplier = BIT(20);
+ u32 div_frac_start;
+ u32 dec_start;
+ u64 ref_clk = parent_rate;
+
+ dec_start = pll_read(base + REG_DSI_14nm_PHY_PLL_DEC_START);
+ dec_start &= 0x0ff;
+
+ DBG("dec_start = %x", dec_start);
+
+ div_frac_start = (pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3)
+ & 0xf) << 16;
+ div_frac_start |= (pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2)
+ & 0xff) << 8;
+ div_frac_start |= pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1)
+ & 0xff;
+
+ DBG("div_frac_start = %x", div_frac_start);
+
+ vco_rate = ref_clk * dec_start;
+
+ vco_rate += ((ref_clk * div_frac_start) / multiplier);
+
+ /*
+ * Recalculating the rate from dec_start and frac_start doesn't end up
+ * the rate we originally set. Convert the freq to KHz, round it up and
+ * convert it back to MHz.
+ */
+ vco_rate = DIV_ROUND_UP_ULL(vco_rate, 1000) * 1000;
+
+ DBG("returning vco rate = %lu", (unsigned long)vco_rate);
+
+ return (unsigned long)vco_rate;
+}
+
+static const struct clk_ops clk_ops_dsi_pll_14nm_vco = {
+ .round_rate = msm_dsi_pll_helper_clk_round_rate,
+ .set_rate = dsi_pll_14nm_vco_set_rate,
+ .recalc_rate = dsi_pll_14nm_vco_recalc_rate,
+ .prepare = msm_dsi_pll_helper_clk_prepare,
+ .unprepare = msm_dsi_pll_helper_clk_unprepare,
+};
+
+/*
+ * N1 and N2 post-divider clock callbacks
+ */
+#define div_mask(width) ((1 << (width)) - 1)
+static unsigned long dsi_pll_14nm_postdiv_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw);
+ struct dsi_pll_14nm *pll_14nm = postdiv->pll;
+ void __iomem *base = pll_14nm->phy_cmn_mmio;
+ u8 shift = postdiv->shift;
+ u8 width = postdiv->width;
+ u32 val;
+
+ DBG("DSI%d PLL parent rate=%lu", pll_14nm->id, parent_rate);
+
+ val = pll_read(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0) >> shift;
+ val &= div_mask(width);
+
+ return divider_recalc_rate(hw, parent_rate, val, NULL,
+ postdiv->flags, width);
+}
+
+static long dsi_pll_14nm_postdiv_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *prate)
+{
+ struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw);
+ struct dsi_pll_14nm *pll_14nm = postdiv->pll;
+
+ DBG("DSI%d PLL parent rate=%lu", pll_14nm->id, rate);
+
+ return divider_round_rate(hw, rate, prate, NULL,
+ postdiv->width,
+ postdiv->flags);
+}
+
+static int dsi_pll_14nm_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw);
+ struct dsi_pll_14nm *pll_14nm = postdiv->pll;
+ void __iomem *base = pll_14nm->phy_cmn_mmio;
+ spinlock_t *lock = &pll_14nm->postdiv_lock;
+ u8 shift = postdiv->shift;
+ u8 width = postdiv->width;
+ unsigned int value;
+ unsigned long flags = 0;
+ u32 val;
+
+ DBG("DSI%d PLL parent rate=%lu parent rate %lu", pll_14nm->id, rate,
+ parent_rate);
+
+ value = divider_get_val(rate, parent_rate, NULL, postdiv->width,
+ postdiv->flags);
+
+ spin_lock_irqsave(lock, flags);
+
+ val = pll_read(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0);
+ val &= ~(div_mask(width) << shift);
+
+ val |= value << shift;
+ pll_write(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, val);
+
+ /* If we're master in dual DSI mode, then the slave PLL's post-dividers
+ * follow the master's post dividers
+ */
+ if (pll_14nm->uc == MSM_DSI_PHY_MASTER) {
+ struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
+ void __iomem *slave_base = pll_14nm_slave->phy_cmn_mmio;
+
+ pll_write(slave_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, val);
+ }
+
+ spin_unlock_irqrestore(lock, flags);
+
+ return 0;
+}
+
+static const struct clk_ops clk_ops_dsi_pll_14nm_postdiv = {
+ .recalc_rate = dsi_pll_14nm_postdiv_recalc_rate,
+ .round_rate = dsi_pll_14nm_postdiv_round_rate,
+ .set_rate = dsi_pll_14nm_postdiv_set_rate,
+};
+
+/*
+ * PLL Callbacks
+ */
+
+static int dsi_pll_14nm_enable_seq(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
+ void __iomem *base = pll_14nm->mmio;
+ void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
+ bool locked;
+
+ DBG("");
+
+ pll_write(base + REG_DSI_14nm_PHY_PLL_VREF_CFG1, 0x10);
+ pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 1);
+
+ locked = pll_14nm_poll_for_ready(pll_14nm, POLL_MAX_READS,
+ POLL_TIMEOUT_US);
+
+ if (unlikely(!locked))
+ DRM_DEV_ERROR(&pll_14nm->pdev->dev, "DSI PLL lock failed\n");
+ else
+ DBG("DSI PLL lock success");
+
+ return locked ? 0 : -EINVAL;
+}
+
+static void dsi_pll_14nm_disable_seq(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
+ void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
+
+ DBG("");
+
+ pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 0);
+}
+
+static void dsi_pll_14nm_save_state(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
+ struct pll_14nm_cached_state *cached_state = &pll_14nm->cached_state;
+ void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
+ u32 data;
+
+ data = pll_read(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0);
+
+ cached_state->n1postdiv = data & 0xf;
+ cached_state->n2postdiv = (data >> 4) & 0xf;
+
+ DBG("DSI%d PLL save state %x %x", pll_14nm->id,
+ cached_state->n1postdiv, cached_state->n2postdiv);
+
+ cached_state->vco_rate = clk_hw_get_rate(&pll->clk_hw);
+}
+
+static int dsi_pll_14nm_restore_state(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
+ struct pll_14nm_cached_state *cached_state = &pll_14nm->cached_state;
+ void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
+ u32 data;
+ int ret;
+
+ ret = dsi_pll_14nm_vco_set_rate(&pll->clk_hw,
+ cached_state->vco_rate, 0);
+ if (ret) {
+ DRM_DEV_ERROR(&pll_14nm->pdev->dev,
+ "restore vco rate failed. ret=%d\n", ret);
+ return ret;
+ }
+
+ data = cached_state->n1postdiv | (cached_state->n2postdiv << 4);
+
+ DBG("DSI%d PLL restore state %x %x", pll_14nm->id,
+ cached_state->n1postdiv, cached_state->n2postdiv);
+
+ pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, data);
+
+ /* also restore post-dividers for slave DSI PLL */
+ if (pll_14nm->uc == MSM_DSI_PHY_MASTER) {
+ struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
+ void __iomem *slave_base = pll_14nm_slave->phy_cmn_mmio;
+
+ pll_write(slave_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, data);
+ }
+
+ return 0;
+}
+
+static int dsi_pll_14nm_set_usecase(struct msm_dsi_pll *pll,
+ enum msm_dsi_phy_usecase uc)
+{
+ struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
+ void __iomem *base = pll_14nm->mmio;
+ u32 clkbuflr_en, bandgap = 0;
+
+ switch (uc) {
+ case MSM_DSI_PHY_STANDALONE:
+ clkbuflr_en = 0x1;
+ break;
+ case MSM_DSI_PHY_MASTER:
+ clkbuflr_en = 0x3;
+ pll_14nm->slave = pll_14nm_list[(pll_14nm->id + 1) % DSI_MAX];
+ break;
+ case MSM_DSI_PHY_SLAVE:
+ clkbuflr_en = 0x0;
+ bandgap = 0x3;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ pll_write(base + REG_DSI_14nm_PHY_PLL_CLKBUFLR_EN, clkbuflr_en);
+ if (bandgap)
+ pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_BANDGAP, bandgap);
+
+ pll_14nm->uc = uc;
+
+ return 0;
+}
+
+static int dsi_pll_14nm_get_provider(struct msm_dsi_pll *pll,
+ struct clk **byte_clk_provider,
+ struct clk **pixel_clk_provider)
+{
+ struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
+ struct clk_hw_onecell_data *hw_data = pll_14nm->hw_data;
+
+ if (byte_clk_provider)
+ *byte_clk_provider = hw_data->hws[DSI_BYTE_PLL_CLK]->clk;
+ if (pixel_clk_provider)
+ *pixel_clk_provider = hw_data->hws[DSI_PIXEL_PLL_CLK]->clk;
+
+ return 0;
+}
+
+static void dsi_pll_14nm_destroy(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
+ struct platform_device *pdev = pll_14nm->pdev;
+ int num_hws = pll_14nm->num_hws;
+
+ of_clk_del_provider(pdev->dev.of_node);
+
+ while (num_hws--)
+ clk_hw_unregister(pll_14nm->hws[num_hws]);
+}
+
+static struct clk_hw *pll_14nm_postdiv_register(struct dsi_pll_14nm *pll_14nm,
+ const char *name,
+ const char *parent_name,
+ unsigned long flags,
+ u8 shift)
+{
+ struct dsi_pll_14nm_postdiv *pll_postdiv;
+ struct device *dev = &pll_14nm->pdev->dev;
+ struct clk_init_data postdiv_init = {
+ .parent_names = (const char *[]) { parent_name },
+ .num_parents = 1,
+ .name = name,
+ .flags = flags,
+ .ops = &clk_ops_dsi_pll_14nm_postdiv,
+ };
+ int ret;
+
+ pll_postdiv = devm_kzalloc(dev, sizeof(*pll_postdiv), GFP_KERNEL);
+ if (!pll_postdiv)
+ return ERR_PTR(-ENOMEM);
+
+ pll_postdiv->pll = pll_14nm;
+ pll_postdiv->shift = shift;
+ /* both N1 and N2 postdividers are 4 bits wide */
+ pll_postdiv->width = 4;
+ /* range of each divider is from 1 to 15 */
+ pll_postdiv->flags = CLK_DIVIDER_ONE_BASED;
+ pll_postdiv->hw.init = &postdiv_init;
+
+ ret = clk_hw_register(dev, &pll_postdiv->hw);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return &pll_postdiv->hw;
+}
+
+static int pll_14nm_register(struct dsi_pll_14nm *pll_14nm)
+{
+ char clk_name[32], parent[32], vco_name[32];
+ struct clk_init_data vco_init = {
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .name = vco_name,
+ .flags = CLK_IGNORE_UNUSED,
+ .ops = &clk_ops_dsi_pll_14nm_vco,
+ };
+ struct device *dev = &pll_14nm->pdev->dev;
+ struct clk_hw **hws = pll_14nm->hws;
+ struct clk_hw_onecell_data *hw_data;
+ struct clk_hw *hw;
+ int num = 0;
+ int ret;
+
+ DBG("DSI%d", pll_14nm->id);
+
+ hw_data = devm_kzalloc(dev, sizeof(*hw_data) +
+ NUM_PROVIDED_CLKS * sizeof(struct clk_hw *),
+ GFP_KERNEL);
+ if (!hw_data)
+ return -ENOMEM;
+
+ snprintf(vco_name, 32, "dsi%dvco_clk", pll_14nm->id);
+ pll_14nm->base.clk_hw.init = &vco_init;
+
+ ret = clk_hw_register(dev, &pll_14nm->base.clk_hw);
+ if (ret)
+ return ret;
+
+ hws[num++] = &pll_14nm->base.clk_hw;
+
+ snprintf(clk_name, 32, "dsi%dn1_postdiv_clk", pll_14nm->id);
+ snprintf(parent, 32, "dsi%dvco_clk", pll_14nm->id);
+
+ /* N1 postdiv, bits 0-3 in REG_DSI_14nm_PHY_CMN_CLK_CFG0 */
+ hw = pll_14nm_postdiv_register(pll_14nm, clk_name, parent,
+ CLK_SET_RATE_PARENT, 0);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ hws[num++] = hw;
+
+ snprintf(clk_name, 32, "dsi%dpllbyte", pll_14nm->id);
+ snprintf(parent, 32, "dsi%dn1_postdiv_clk", pll_14nm->id);
+
+ /* DSI Byte clock = VCO_CLK / N1 / 8 */
+ hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
+ CLK_SET_RATE_PARENT, 1, 8);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ hws[num++] = hw;
+ hw_data->hws[DSI_BYTE_PLL_CLK] = hw;
+
+ snprintf(clk_name, 32, "dsi%dn1_postdivby2_clk", pll_14nm->id);
+ snprintf(parent, 32, "dsi%dn1_postdiv_clk", pll_14nm->id);
+
+ /*
+ * Skip the mux for now, force DSICLK_SEL to 1, Add a /2 divider
+ * on the way. Don't let it set parent.
+ */
+ hw = clk_hw_register_fixed_factor(dev, clk_name, parent, 0, 1, 2);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ hws[num++] = hw;
+
+ snprintf(clk_name, 32, "dsi%dpll", pll_14nm->id);
+ snprintf(parent, 32, "dsi%dn1_postdivby2_clk", pll_14nm->id);
+
+ /* DSI pixel clock = VCO_CLK / N1 / 2 / N2
+ * This is the output of N2 post-divider, bits 4-7 in
+ * REG_DSI_14nm_PHY_CMN_CLK_CFG0. Don't let it set parent.
+ */
+ hw = pll_14nm_postdiv_register(pll_14nm, clk_name, parent, 0, 4);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ hws[num++] = hw;
+ hw_data->hws[DSI_PIXEL_PLL_CLK] = hw;
+
+ pll_14nm->num_hws = num;
+
+ hw_data->num = NUM_PROVIDED_CLKS;
+ pll_14nm->hw_data = hw_data;
+
+ ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+ pll_14nm->hw_data);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+struct msm_dsi_pll *msm_dsi_pll_14nm_init(struct platform_device *pdev, int id)
+{
+ struct dsi_pll_14nm *pll_14nm;
+ struct msm_dsi_pll *pll;
+ int ret;
+
+ if (!pdev)
+ return ERR_PTR(-ENODEV);
+
+ pll_14nm = devm_kzalloc(&pdev->dev, sizeof(*pll_14nm), GFP_KERNEL);
+ if (!pll_14nm)
+ return ERR_PTR(-ENOMEM);
+
+ DBG("PLL%d", id);
+
+ pll_14nm->pdev = pdev;
+ pll_14nm->id = id;
+ pll_14nm_list[id] = pll_14nm;
+
+ pll_14nm->phy_cmn_mmio = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
+ if (IS_ERR_OR_NULL(pll_14nm->phy_cmn_mmio)) {
+ DRM_DEV_ERROR(&pdev->dev, "failed to map CMN PHY base\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ pll_14nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL");
+ if (IS_ERR_OR_NULL(pll_14nm->mmio)) {
+ DRM_DEV_ERROR(&pdev->dev, "failed to map PLL base\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ spin_lock_init(&pll_14nm->postdiv_lock);
+
+ pll = &pll_14nm->base;
+ pll->min_rate = VCO_MIN_RATE;
+ pll->max_rate = VCO_MAX_RATE;
+ pll->get_provider = dsi_pll_14nm_get_provider;
+ pll->destroy = dsi_pll_14nm_destroy;
+ pll->disable_seq = dsi_pll_14nm_disable_seq;
+ pll->save_state = dsi_pll_14nm_save_state;
+ pll->restore_state = dsi_pll_14nm_restore_state;
+ pll->set_usecase = dsi_pll_14nm_set_usecase;
+
+ pll_14nm->vco_delay = 1;
+
+ pll->en_seq_cnt = 1;
+ pll->enable_seqs[0] = dsi_pll_14nm_enable_seq;
+
+ ret = pll_14nm_register(pll_14nm);
+ if (ret) {
+ DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
+ return ERR_PTR(ret);
+ }
+
+ return pll;
+}
+
static void dsi_14nm_dphy_set_timing(struct msm_dsi_phy *phy,
struct msm_dsi_dphy_timing *timing,
int lane_idx)
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
index c3c580cfd8b1..b2eac57700ce 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
@@ -3,9 +3,646 @@
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*/
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+
#include "dsi_phy.h"
+#include "dsi_pll.h"
#include "dsi.xml.h"
+/*
+ * DSI PLL 28nm - clock diagram (eg: DSI0):
+ *
+ * dsi0analog_postdiv_clk
+ * | dsi0indirect_path_div2_clk
+ * | |
+ * +------+ | +----+ | |\ dsi0byte_mux
+ * dsi0vco_clk --o--| DIV1 |--o--| /2 |--o--| \ |
+ * | +------+ +----+ | m| | +----+
+ * | | u|--o--| /4 |-- dsi0pllbyte
+ * | | x| +----+
+ * o--------------------------| /
+ * | |/
+ * | +------+
+ * o----------| DIV3 |------------------------- dsi0pll
+ * +------+
+ */
+
+#define POLL_MAX_READS 10
+#define POLL_TIMEOUT_US 50
+
+#define NUM_PROVIDED_CLKS 2
+
+#define VCO_REF_CLK_RATE 19200000
+#define VCO_MIN_RATE 350000000
+#define VCO_MAX_RATE 750000000
+
+#define DSI_BYTE_PLL_CLK 0
+#define DSI_PIXEL_PLL_CLK 1
+
+#define LPFR_LUT_SIZE 10
+struct lpfr_cfg {
+ unsigned long vco_rate;
+ u32 resistance;
+};
+
+/* Loop filter resistance: */
+static const struct lpfr_cfg lpfr_lut[LPFR_LUT_SIZE] = {
+ { 479500000, 8 },
+ { 480000000, 11 },
+ { 575500000, 8 },
+ { 576000000, 12 },
+ { 610500000, 8 },
+ { 659500000, 9 },
+ { 671500000, 10 },
+ { 672000000, 14 },
+ { 708500000, 10 },
+ { 750000000, 11 },
+};
+
+struct pll_28nm_cached_state {
+ unsigned long vco_rate;
+ u8 postdiv3;
+ u8 postdiv1;
+ u8 byte_mux;
+};
+
+struct dsi_pll_28nm {
+ struct msm_dsi_pll base;
+
+ int id;
+ struct platform_device *pdev;
+ void __iomem *mmio;
+
+ int vco_delay;
+
+ /* private clocks: */
+ struct clk *clks[NUM_DSI_CLOCKS_MAX];
+ u32 num_clks;
+
+ /* clock-provider: */
+ struct clk *provided_clks[NUM_PROVIDED_CLKS];
+ struct clk_onecell_data clk_data;
+
+ struct pll_28nm_cached_state cached_state;
+};
+
+#define to_pll_28nm(x) container_of(x, struct dsi_pll_28nm, base)
+
+static bool pll_28nm_poll_for_ready(struct dsi_pll_28nm *pll_28nm,
+ u32 nb_tries, u32 timeout_us)
+{
+ bool pll_locked = false;
+ u32 val;
+
+ while (nb_tries--) {
+ val = pll_read(pll_28nm->mmio + REG_DSI_28nm_PHY_PLL_STATUS);
+ pll_locked = !!(val & DSI_28nm_PHY_PLL_STATUS_PLL_RDY);
+
+ if (pll_locked)
+ break;
+
+ udelay(timeout_us);
+ }
+ DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* ");
+
+ return pll_locked;
+}
+
+static void pll_28nm_software_reset(struct dsi_pll_28nm *pll_28nm)
+{
+ void __iomem *base = pll_28nm->mmio;
+
+ /*
+ * Add HW recommended delays after toggling the software
+ * reset bit off and back on.
+ */
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_TEST_CFG,
+ DSI_28nm_PHY_PLL_TEST_CFG_PLL_SW_RESET, 1);
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_TEST_CFG, 0x00, 1);
+}
+
+/*
+ * Clock Callbacks
+ */
+static int dsi_pll_28nm_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+ struct device *dev = &pll_28nm->pdev->dev;
+ void __iomem *base = pll_28nm->mmio;
+ unsigned long div_fbx1000, gen_vco_clk;
+ u32 refclk_cfg, frac_n_mode, frac_n_value;
+ u32 sdm_cfg0, sdm_cfg1, sdm_cfg2, sdm_cfg3;
+ u32 cal_cfg10, cal_cfg11;
+ u32 rem;
+ int i;
+
+ VERB("rate=%lu, parent's=%lu", rate, parent_rate);
+
+ /* Force postdiv2 to be div-4 */
+ pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV2_CFG, 3);
+
+ /* Configure the Loop filter resistance */
+ for (i = 0; i < LPFR_LUT_SIZE; i++)
+ if (rate <= lpfr_lut[i].vco_rate)
+ break;
+ if (i == LPFR_LUT_SIZE) {
+ DRM_DEV_ERROR(dev, "unable to get loop filter resistance. vco=%lu\n",
+ rate);
+ return -EINVAL;
+ }
+ pll_write(base + REG_DSI_28nm_PHY_PLL_LPFR_CFG, lpfr_lut[i].resistance);
+
+ /* Loop filter capacitance values : c1 and c2 */
+ pll_write(base + REG_DSI_28nm_PHY_PLL_LPFC1_CFG, 0x70);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_LPFC2_CFG, 0x15);
+
+ rem = rate % VCO_REF_CLK_RATE;
+ if (rem) {
+ refclk_cfg = DSI_28nm_PHY_PLL_REFCLK_CFG_DBLR;
+ frac_n_mode = 1;
+ div_fbx1000 = rate / (VCO_REF_CLK_RATE / 500);
+ gen_vco_clk = div_fbx1000 * (VCO_REF_CLK_RATE / 500);
+ } else {
+ refclk_cfg = 0x0;
+ frac_n_mode = 0;
+ div_fbx1000 = rate / (VCO_REF_CLK_RATE / 1000);
+ gen_vco_clk = div_fbx1000 * (VCO_REF_CLK_RATE / 1000);
+ }
+
+ DBG("refclk_cfg = %d", refclk_cfg);
+
+ rem = div_fbx1000 % 1000;
+ frac_n_value = (rem << 16) / 1000;
+
+ DBG("div_fb = %lu", div_fbx1000);
+ DBG("frac_n_value = %d", frac_n_value);
+
+ DBG("Generated VCO Clock: %lu", gen_vco_clk);
+ rem = 0;
+ sdm_cfg1 = pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1);
+ sdm_cfg1 &= ~DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET__MASK;
+ if (frac_n_mode) {
+ sdm_cfg0 = 0x0;
+ sdm_cfg0 |= DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV(0);
+ sdm_cfg1 |= DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET(
+ (u32)(((div_fbx1000 / 1000) & 0x3f) - 1));
+ sdm_cfg3 = frac_n_value >> 8;
+ sdm_cfg2 = frac_n_value & 0xff;
+ } else {
+ sdm_cfg0 = DSI_28nm_PHY_PLL_SDM_CFG0_BYP;
+ sdm_cfg0 |= DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV(
+ (u32)(((div_fbx1000 / 1000) & 0x3f) - 1));
+ sdm_cfg1 |= DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET(0);
+ sdm_cfg2 = 0;
+ sdm_cfg3 = 0;
+ }
+
+ DBG("sdm_cfg0=%d", sdm_cfg0);
+ DBG("sdm_cfg1=%d", sdm_cfg1);
+ DBG("sdm_cfg2=%d", sdm_cfg2);
+ DBG("sdm_cfg3=%d", sdm_cfg3);
+
+ cal_cfg11 = (u32)(gen_vco_clk / (256 * 1000000));
+ cal_cfg10 = (u32)((gen_vco_clk % (256 * 1000000)) / 1000000);
+ DBG("cal_cfg10=%d, cal_cfg11=%d", cal_cfg10, cal_cfg11);
+
+ pll_write(base + REG_DSI_28nm_PHY_PLL_CHGPUMP_CFG, 0x02);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG3, 0x2b);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG4, 0x06);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d);
+
+ pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1, sdm_cfg1);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG2,
+ DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0(sdm_cfg2));
+ pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG3,
+ DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8(sdm_cfg3));
+ pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG4, 0x00);
+
+ /* Add hardware recommended delay for correct PLL configuration */
+ if (pll_28nm->vco_delay)
+ udelay(pll_28nm->vco_delay);
+
+ pll_write(base + REG_DSI_28nm_PHY_PLL_REFCLK_CFG, refclk_cfg);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_PWRGEN_CFG, 0x00);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_VCOLPF_CFG, 0x31);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0, sdm_cfg0);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG0, 0x12);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG6, 0x30);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG7, 0x00);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG8, 0x60);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG9, 0x00);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG10, cal_cfg10 & 0xff);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG11, cal_cfg11 & 0xff);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_EFUSE_CFG, 0x20);
+
+ return 0;
+}
+
+static int dsi_pll_28nm_clk_is_enabled(struct clk_hw *hw)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+ return pll_28nm_poll_for_ready(pll_28nm, POLL_MAX_READS,
+ POLL_TIMEOUT_US);
+}
+
+static unsigned long dsi_pll_28nm_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+ void __iomem *base = pll_28nm->mmio;
+ u32 sdm0, doubler, sdm_byp_div;
+ u32 sdm_dc_off, sdm_freq_seed, sdm2, sdm3;
+ u32 ref_clk = VCO_REF_CLK_RATE;
+ unsigned long vco_rate;
+
+ VERB("parent_rate=%lu", parent_rate);
+
+ /* Check to see if the ref clk doubler is enabled */
+ doubler = pll_read(base + REG_DSI_28nm_PHY_PLL_REFCLK_CFG) &
+ DSI_28nm_PHY_PLL_REFCLK_CFG_DBLR;
+ ref_clk += (doubler * VCO_REF_CLK_RATE);
+
+ /* see if it is integer mode or sdm mode */
+ sdm0 = pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0);
+ if (sdm0 & DSI_28nm_PHY_PLL_SDM_CFG0_BYP) {
+ /* integer mode */
+ sdm_byp_div = FIELD(
+ pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0),
+ DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV) + 1;
+ vco_rate = ref_clk * sdm_byp_div;
+ } else {
+ /* sdm mode */
+ sdm_dc_off = FIELD(
+ pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1),
+ DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET);
+ DBG("sdm_dc_off = %d", sdm_dc_off);
+ sdm2 = FIELD(pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG2),
+ DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0);
+ sdm3 = FIELD(pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG3),
+ DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8);
+ sdm_freq_seed = (sdm3 << 8) | sdm2;
+ DBG("sdm_freq_seed = %d", sdm_freq_seed);
+
+ vco_rate = (ref_clk * (sdm_dc_off + 1)) +
+ mult_frac(ref_clk, sdm_freq_seed, BIT(16));
+ DBG("vco rate = %lu", vco_rate);
+ }
+
+ DBG("returning vco rate = %lu", vco_rate);
+
+ return vco_rate;
+}
+
+static const struct clk_ops clk_ops_dsi_pll_28nm_vco = {
+ .round_rate = msm_dsi_pll_helper_clk_round_rate,
+ .set_rate = dsi_pll_28nm_clk_set_rate,
+ .recalc_rate = dsi_pll_28nm_clk_recalc_rate,
+ .prepare = msm_dsi_pll_helper_clk_prepare,
+ .unprepare = msm_dsi_pll_helper_clk_unprepare,
+ .is_enabled = dsi_pll_28nm_clk_is_enabled,
+};
+
+/*
+ * PLL Callbacks
+ */
+static int dsi_pll_28nm_enable_seq_hpm(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+ struct device *dev = &pll_28nm->pdev->dev;
+ void __iomem *base = pll_28nm->mmio;
+ u32 max_reads = 5, timeout_us = 100;
+ bool locked;
+ u32 val;
+ int i;
+
+ DBG("id=%d", pll_28nm->id);
+
+ pll_28nm_software_reset(pll_28nm);
+
+ /*
+ * PLL power up sequence.
+ * Add necessary delays recommended by hardware.
+ */
+ val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B;
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 1);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B;
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B;
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE;
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600);
+
+ for (i = 0; i < 2; i++) {
+ /* DSI Uniphy lock detect setting */
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2,
+ 0x0c, 100);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d);
+
+ /* poll for PLL ready status */
+ locked = pll_28nm_poll_for_ready(pll_28nm,
+ max_reads, timeout_us);
+ if (locked)
+ break;
+
+ pll_28nm_software_reset(pll_28nm);
+
+ /*
+ * PLL power up sequence.
+ * Add necessary delays recommended by hardware.
+ */
+ val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B;
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 1);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B;
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B;
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 250);
+
+ val &= ~DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B;
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B;
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE;
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600);
+ }
+
+ if (unlikely(!locked))
+ DRM_DEV_ERROR(dev, "DSI PLL lock failed\n");
+ else
+ DBG("DSI PLL Lock success");
+
+ return locked ? 0 : -EINVAL;
+}
+
+static int dsi_pll_28nm_enable_seq_lp(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+ struct device *dev = &pll_28nm->pdev->dev;
+ void __iomem *base = pll_28nm->mmio;
+ bool locked;
+ u32 max_reads = 10, timeout_us = 50;
+ u32 val;
+
+ DBG("id=%d", pll_28nm->id);
+
+ pll_28nm_software_reset(pll_28nm);
+
+ /*
+ * PLL power up sequence.
+ * Add necessary delays recommended by hardware.
+ */
+ pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_CAL_CFG1, 0x34, 500);
+
+ val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B;
+ pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B;
+ pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500);
+
+ val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B |
+ DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE;
+ pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500);
+
+ /* DSI PLL toggle lock detect setting */
+ pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x04, 500);
+ pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x05, 512);
+
+ locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, timeout_us);
+
+ if (unlikely(!locked))
+ DRM_DEV_ERROR(dev, "DSI PLL lock failed\n");
+ else
+ DBG("DSI PLL lock success");
+
+ return locked ? 0 : -EINVAL;
+}
+
+static void dsi_pll_28nm_disable_seq(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+ DBG("id=%d", pll_28nm->id);
+ pll_write(pll_28nm->mmio + REG_DSI_28nm_PHY_PLL_GLB_CFG, 0x00);
+}
+
+static void dsi_pll_28nm_save_state(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+ struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state;
+ void __iomem *base = pll_28nm->mmio;
+
+ cached_state->postdiv3 =
+ pll_read(base + REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG);
+ cached_state->postdiv1 =
+ pll_read(base + REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG);
+ cached_state->byte_mux = pll_read(base + REG_DSI_28nm_PHY_PLL_VREG_CFG);
+ if (dsi_pll_28nm_clk_is_enabled(&pll->clk_hw))
+ cached_state->vco_rate = clk_hw_get_rate(&pll->clk_hw);
+ else
+ cached_state->vco_rate = 0;
+}
+
+static int dsi_pll_28nm_restore_state(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+ struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state;
+ void __iomem *base = pll_28nm->mmio;
+ int ret;
+
+ ret = dsi_pll_28nm_clk_set_rate(&pll->clk_hw,
+ cached_state->vco_rate, 0);
+ if (ret) {
+ DRM_DEV_ERROR(&pll_28nm->pdev->dev,
+ "restore vco rate failed. ret=%d\n", ret);
+ return ret;
+ }
+
+ pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG,
+ cached_state->postdiv3);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG,
+ cached_state->postdiv1);
+ pll_write(base + REG_DSI_28nm_PHY_PLL_VREG_CFG,
+ cached_state->byte_mux);
+
+ return 0;
+}
+
+static int dsi_pll_28nm_get_provider(struct msm_dsi_pll *pll,
+ struct clk **byte_clk_provider,
+ struct clk **pixel_clk_provider)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+ if (byte_clk_provider)
+ *byte_clk_provider = pll_28nm->provided_clks[DSI_BYTE_PLL_CLK];
+ if (pixel_clk_provider)
+ *pixel_clk_provider =
+ pll_28nm->provided_clks[DSI_PIXEL_PLL_CLK];
+
+ return 0;
+}
+
+static void dsi_pll_28nm_destroy(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+ int i;
+
+ msm_dsi_pll_helper_unregister_clks(pll_28nm->pdev,
+ pll_28nm->clks, pll_28nm->num_clks);
+
+ for (i = 0; i < NUM_PROVIDED_CLKS; i++)
+ pll_28nm->provided_clks[i] = NULL;
+
+ pll_28nm->num_clks = 0;
+ pll_28nm->clk_data.clks = NULL;
+ pll_28nm->clk_data.clk_num = 0;
+}
+
+static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm)
+{
+ char clk_name[32], parent1[32], parent2[32], vco_name[32];
+ struct clk_init_data vco_init = {
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .name = vco_name,
+ .flags = CLK_IGNORE_UNUSED,
+ .ops = &clk_ops_dsi_pll_28nm_vco,
+ };
+ struct device *dev = &pll_28nm->pdev->dev;
+ struct clk **clks = pll_28nm->clks;
+ struct clk **provided_clks = pll_28nm->provided_clks;
+ int num = 0;
+ int ret;
+
+ DBG("%d", pll_28nm->id);
+
+ snprintf(vco_name, 32, "dsi%dvco_clk", pll_28nm->id);
+ pll_28nm->base.clk_hw.init = &vco_init;
+ clks[num++] = clk_register(dev, &pll_28nm->base.clk_hw);
+
+ snprintf(clk_name, 32, "dsi%danalog_postdiv_clk", pll_28nm->id);
+ snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->id);
+ clks[num++] = clk_register_divider(dev, clk_name,
+ parent1, CLK_SET_RATE_PARENT,
+ pll_28nm->mmio +
+ REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG,
+ 0, 4, 0, NULL);
+
+ snprintf(clk_name, 32, "dsi%dindirect_path_div2_clk", pll_28nm->id);
+ snprintf(parent1, 32, "dsi%danalog_postdiv_clk", pll_28nm->id);
+ clks[num++] = clk_register_fixed_factor(dev, clk_name,
+ parent1, CLK_SET_RATE_PARENT,
+ 1, 2);
+
+ snprintf(clk_name, 32, "dsi%dpll", pll_28nm->id);
+ snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->id);
+ clks[num++] = provided_clks[DSI_PIXEL_PLL_CLK] =
+ clk_register_divider(dev, clk_name,
+ parent1, 0, pll_28nm->mmio +
+ REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG,
+ 0, 8, 0, NULL);
+
+ snprintf(clk_name, 32, "dsi%dbyte_mux", pll_28nm->id);
+ snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->id);
+ snprintf(parent2, 32, "dsi%dindirect_path_div2_clk", pll_28nm->id);
+ clks[num++] = clk_register_mux(dev, clk_name,
+ ((const char *[]){
+ parent1, parent2
+ }), 2, CLK_SET_RATE_PARENT, pll_28nm->mmio +
+ REG_DSI_28nm_PHY_PLL_VREG_CFG, 1, 1, 0, NULL);
+
+ snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->id);
+ snprintf(parent1, 32, "dsi%dbyte_mux", pll_28nm->id);
+ clks[num++] = provided_clks[DSI_BYTE_PLL_CLK] =
+ clk_register_fixed_factor(dev, clk_name,
+ parent1, CLK_SET_RATE_PARENT, 1, 4);
+
+ pll_28nm->num_clks = num;
+
+ pll_28nm->clk_data.clk_num = NUM_PROVIDED_CLKS;
+ pll_28nm->clk_data.clks = provided_clks;
+
+ ret = of_clk_add_provider(dev->of_node,
+ of_clk_src_onecell_get, &pll_28nm->clk_data);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+struct msm_dsi_pll *msm_dsi_pll_28nm_init(struct platform_device *pdev,
+ enum msm_dsi_phy_type type, int id)
+{
+ struct dsi_pll_28nm *pll_28nm;
+ struct msm_dsi_pll *pll;
+ int ret;
+
+ if (!pdev)
+ return ERR_PTR(-ENODEV);
+
+ pll_28nm = devm_kzalloc(&pdev->dev, sizeof(*pll_28nm), GFP_KERNEL);
+ if (!pll_28nm)
+ return ERR_PTR(-ENOMEM);
+
+ pll_28nm->pdev = pdev;
+ pll_28nm->id = id;
+
+ pll_28nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL");
+ if (IS_ERR_OR_NULL(pll_28nm->mmio)) {
+ DRM_DEV_ERROR(&pdev->dev, "%s: failed to map pll base\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ pll = &pll_28nm->base;
+ pll->min_rate = VCO_MIN_RATE;
+ pll->max_rate = VCO_MAX_RATE;
+ pll->get_provider = dsi_pll_28nm_get_provider;
+ pll->destroy = dsi_pll_28nm_destroy;
+ pll->disable_seq = dsi_pll_28nm_disable_seq;
+ pll->save_state = dsi_pll_28nm_save_state;
+ pll->restore_state = dsi_pll_28nm_restore_state;
+
+ if (type == MSM_DSI_PHY_28NM_HPM) {
+ pll_28nm->vco_delay = 1;
+
+ pll->en_seq_cnt = 3;
+ pll->enable_seqs[0] = dsi_pll_28nm_enable_seq_hpm;
+ pll->enable_seqs[1] = dsi_pll_28nm_enable_seq_hpm;
+ pll->enable_seqs[2] = dsi_pll_28nm_enable_seq_hpm;
+ } else if (type == MSM_DSI_PHY_28NM_LP) {
+ pll_28nm->vco_delay = 1000;
+
+ pll->en_seq_cnt = 1;
+ pll->enable_seqs[0] = dsi_pll_28nm_enable_seq_lp;
+ } else {
+ DRM_DEV_ERROR(&pdev->dev, "phy type (%d) is not 28nm\n", type);
+ return ERR_PTR(-EINVAL);
+ }
+
+ ret = pll_28nm_register(pll_28nm);
+ if (ret) {
+ DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
+ return ERR_PTR(ret);
+ }
+
+ return pll;
+}
+
+
static void dsi_28nm_dphy_set_timing(struct msm_dsi_phy *phy,
struct msm_dsi_dphy_timing *timing)
{
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
index f22583353957..50ed935a5d3e 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
@@ -3,11 +3,530 @@
* Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
*/
+#include <linux/clk-provider.h>
#include <linux/delay.h>
#include "dsi_phy.h"
+#include "dsi_pll.h"
#include "dsi.xml.h"
+/*
+ * DSI PLL 28nm (8960/A family) - clock diagram (eg: DSI1):
+ *
+ *
+ * +------+
+ * dsi1vco_clk ----o-----| DIV1 |---dsi1pllbit (not exposed as clock)
+ * F * byte_clk | +------+
+ * | bit clock divider (F / 8)
+ * |
+ * | +------+
+ * o-----| DIV2 |---dsi0pllbyte---o---> To byte RCG
+ * | +------+ | (sets parent rate)
+ * | byte clock divider (F) |
+ * | |
+ * | o---> To esc RCG
+ * | (doesn't set parent rate)
+ * |
+ * | +------+
+ * o-----| DIV3 |----dsi0pll------o---> To dsi RCG
+ * +------+ | (sets parent rate)
+ * dsi clock divider (F * magic) |
+ * |
+ * o---> To pixel rcg
+ * (doesn't set parent rate)
+ */
+
+#define POLL_MAX_READS 8000
+#define POLL_TIMEOUT_US 1
+
+#define NUM_PROVIDED_CLKS 2
+
+#define VCO_REF_CLK_RATE 27000000
+#define VCO_MIN_RATE 600000000
+#define VCO_MAX_RATE 1200000000
+
+#define DSI_BYTE_PLL_CLK 0
+#define DSI_PIXEL_PLL_CLK 1
+
+#define VCO_PREF_DIV_RATIO 27
+
+struct pll_28nm_cached_state {
+ unsigned long vco_rate;
+ u8 postdiv3;
+ u8 postdiv2;
+ u8 postdiv1;
+};
+
+struct clk_bytediv {
+ struct clk_hw hw;
+ void __iomem *reg;
+};
+
+struct dsi_pll_28nm {
+ struct msm_dsi_pll base;
+
+ int id;
+ struct platform_device *pdev;
+ void __iomem *mmio;
+
+ /* custom byte clock divider */
+ struct clk_bytediv *bytediv;
+
+ /* private clocks: */
+ struct clk *clks[NUM_DSI_CLOCKS_MAX];
+ u32 num_clks;
+
+ /* clock-provider: */
+ struct clk *provided_clks[NUM_PROVIDED_CLKS];
+ struct clk_onecell_data clk_data;
+
+ struct pll_28nm_cached_state cached_state;
+};
+
+#define to_pll_28nm(x) container_of(x, struct dsi_pll_28nm, base)
+
+static bool pll_28nm_poll_for_ready(struct dsi_pll_28nm *pll_28nm,
+ int nb_tries, int timeout_us)
+{
+ bool pll_locked = false;
+ u32 val;
+
+ while (nb_tries--) {
+ val = pll_read(pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_RDY);
+ pll_locked = !!(val & DSI_28nm_8960_PHY_PLL_RDY_PLL_RDY);
+
+ if (pll_locked)
+ break;
+
+ udelay(timeout_us);
+ }
+ DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* ");
+
+ return pll_locked;
+}
+
+/*
+ * Clock Callbacks
+ */
+static int dsi_pll_28nm_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+ void __iomem *base = pll_28nm->mmio;
+ u32 val, temp, fb_divider;
+
+ DBG("rate=%lu, parent's=%lu", rate, parent_rate);
+
+ temp = rate / 10;
+ val = VCO_REF_CLK_RATE / 10;
+ fb_divider = (temp * VCO_PREF_DIV_RATIO) / val;
+ fb_divider = fb_divider / 2 - 1;
+ pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1,
+ fb_divider & 0xff);
+
+ val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2);
+
+ val |= (fb_divider >> 8) & 0x07;
+
+ pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2,
+ val);
+
+ val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3);
+
+ val |= (VCO_PREF_DIV_RATIO - 1) & 0x3f;
+
+ pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3,
+ val);
+
+ pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_6,
+ 0xf);
+
+ val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
+ val |= 0x7 << 4;
+ pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8,
+ val);
+
+ return 0;
+}
+
+static int dsi_pll_28nm_clk_is_enabled(struct clk_hw *hw)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+ return pll_28nm_poll_for_ready(pll_28nm, POLL_MAX_READS,
+ POLL_TIMEOUT_US);
+}
+
+static unsigned long dsi_pll_28nm_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+ void __iomem *base = pll_28nm->mmio;
+ unsigned long vco_rate;
+ u32 status, fb_divider, temp, ref_divider;
+
+ VERB("parent_rate=%lu", parent_rate);
+
+ status = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0);
+
+ if (status & DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE) {
+ fb_divider = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1);
+ fb_divider &= 0xff;
+ temp = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2) & 0x07;
+ fb_divider = (temp << 8) | fb_divider;
+ fb_divider += 1;
+
+ ref_divider = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3);
+ ref_divider &= 0x3f;
+ ref_divider += 1;
+
+ /* multiply by 2 */
+ vco_rate = (parent_rate / ref_divider) * fb_divider * 2;
+ } else {
+ vco_rate = 0;
+ }
+
+ DBG("returning vco rate = %lu", vco_rate);
+
+ return vco_rate;
+}
+
+static const struct clk_ops clk_ops_dsi_pll_28nm_vco = {
+ .round_rate = msm_dsi_pll_helper_clk_round_rate,
+ .set_rate = dsi_pll_28nm_clk_set_rate,
+ .recalc_rate = dsi_pll_28nm_clk_recalc_rate,
+ .prepare = msm_dsi_pll_helper_clk_prepare,
+ .unprepare = msm_dsi_pll_helper_clk_unprepare,
+ .is_enabled = dsi_pll_28nm_clk_is_enabled,
+};
+
+/*
+ * Custom byte clock divier clk_ops
+ *
+ * This clock is the entry point to configuring the PLL. The user (dsi host)
+ * will set this clock's rate to the desired byte clock rate. The VCO lock
+ * frequency is a multiple of the byte clock rate. The multiplication factor
+ * (shown as F in the diagram above) is a function of the byte clock rate.
+ *
+ * This custom divider clock ensures that its parent (VCO) is set to the
+ * desired rate, and that the byte clock postdivider (POSTDIV2) is configured
+ * accordingly
+ */
+#define to_clk_bytediv(_hw) container_of(_hw, struct clk_bytediv, hw)
+
+static unsigned long clk_bytediv_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_bytediv *bytediv = to_clk_bytediv(hw);
+ unsigned int div;
+
+ div = pll_read(bytediv->reg) & 0xff;
+
+ return parent_rate / (div + 1);
+}
+
+/* find multiplication factor(wrt byte clock) at which the VCO should be set */
+static unsigned int get_vco_mul_factor(unsigned long byte_clk_rate)
+{
+ unsigned long bit_mhz;
+
+ /* convert to bit clock in Mhz */
+ bit_mhz = (byte_clk_rate * 8) / 1000000;
+
+ if (bit_mhz < 125)
+ return 64;
+ else if (bit_mhz < 250)
+ return 32;
+ else if (bit_mhz < 600)
+ return 16;
+ else
+ return 8;
+}
+
+static long clk_bytediv_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ unsigned long best_parent;
+ unsigned int factor;
+
+ factor = get_vco_mul_factor(rate);
+
+ best_parent = rate * factor;
+ *prate = clk_hw_round_rate(clk_hw_get_parent(hw), best_parent);
+
+ return *prate / factor;
+}
+
+static int clk_bytediv_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_bytediv *bytediv = to_clk_bytediv(hw);
+ u32 val;
+ unsigned int factor;
+
+ factor = get_vco_mul_factor(rate);
+
+ val = pll_read(bytediv->reg);
+ val |= (factor - 1) & 0xff;
+ pll_write(bytediv->reg, val);
+
+ return 0;
+}
+
+/* Our special byte clock divider ops */
+static const struct clk_ops clk_bytediv_ops = {
+ .round_rate = clk_bytediv_round_rate,
+ .set_rate = clk_bytediv_set_rate,
+ .recalc_rate = clk_bytediv_recalc_rate,
+};
+
+/*
+ * PLL Callbacks
+ */
+static int dsi_pll_28nm_enable_seq(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+ struct device *dev = &pll_28nm->pdev->dev;
+ void __iomem *base = pll_28nm->mmio;
+ bool locked;
+ unsigned int bit_div, byte_div;
+ int max_reads = 1000, timeout_us = 100;
+ u32 val;
+
+ DBG("id=%d", pll_28nm->id);
+
+ /*
+ * before enabling the PLL, configure the bit clock divider since we
+ * don't expose it as a clock to the outside world
+ * 1: read back the byte clock divider that should already be set
+ * 2: divide by 8 to get bit clock divider
+ * 3: write it to POSTDIV1
+ */
+ val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9);
+ byte_div = val + 1;
+ bit_div = byte_div / 8;
+
+ val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
+ val &= ~0xf;
+ val |= (bit_div - 1);
+ pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8, val);
+
+ /* enable the PLL */
+ pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0,
+ DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE);
+
+ locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, timeout_us);
+
+ if (unlikely(!locked))
+ DRM_DEV_ERROR(dev, "DSI PLL lock failed\n");
+ else
+ DBG("DSI PLL lock success");
+
+ return locked ? 0 : -EINVAL;
+}
+
+static void dsi_pll_28nm_disable_seq(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+ DBG("id=%d", pll_28nm->id);
+ pll_write(pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_0, 0x00);
+}
+
+static void dsi_pll_28nm_save_state(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+ struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state;
+ void __iomem *base = pll_28nm->mmio;
+
+ cached_state->postdiv3 =
+ pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_10);
+ cached_state->postdiv2 =
+ pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9);
+ cached_state->postdiv1 =
+ pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
+
+ cached_state->vco_rate = clk_hw_get_rate(&pll->clk_hw);
+}
+
+static int dsi_pll_28nm_restore_state(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+ struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state;
+ void __iomem *base = pll_28nm->mmio;
+ int ret;
+
+ ret = dsi_pll_28nm_clk_set_rate(&pll->clk_hw,
+ cached_state->vco_rate, 0);
+ if (ret) {
+ DRM_DEV_ERROR(&pll_28nm->pdev->dev,
+ "restore vco rate failed. ret=%d\n", ret);
+ return ret;
+ }
+
+ pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_10,
+ cached_state->postdiv3);
+ pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9,
+ cached_state->postdiv2);
+ pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8,
+ cached_state->postdiv1);
+
+ return 0;
+}
+
+static int dsi_pll_28nm_get_provider(struct msm_dsi_pll *pll,
+ struct clk **byte_clk_provider,
+ struct clk **pixel_clk_provider)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+ if (byte_clk_provider)
+ *byte_clk_provider = pll_28nm->provided_clks[DSI_BYTE_PLL_CLK];
+ if (pixel_clk_provider)
+ *pixel_clk_provider =
+ pll_28nm->provided_clks[DSI_PIXEL_PLL_CLK];
+
+ return 0;
+}
+
+static void dsi_pll_28nm_destroy(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+ msm_dsi_pll_helper_unregister_clks(pll_28nm->pdev,
+ pll_28nm->clks, pll_28nm->num_clks);
+}
+
+static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm)
+{
+ char *clk_name, *parent_name, *vco_name;
+ struct clk_init_data vco_init = {
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .flags = CLK_IGNORE_UNUSED,
+ .ops = &clk_ops_dsi_pll_28nm_vco,
+ };
+ struct device *dev = &pll_28nm->pdev->dev;
+ struct clk **clks = pll_28nm->clks;
+ struct clk **provided_clks = pll_28nm->provided_clks;
+ struct clk_bytediv *bytediv;
+ struct clk_init_data bytediv_init = { };
+ int ret, num = 0;
+
+ DBG("%d", pll_28nm->id);
+
+ bytediv = devm_kzalloc(dev, sizeof(*bytediv), GFP_KERNEL);
+ if (!bytediv)
+ return -ENOMEM;
+
+ vco_name = devm_kzalloc(dev, 32, GFP_KERNEL);
+ if (!vco_name)
+ return -ENOMEM;
+
+ parent_name = devm_kzalloc(dev, 32, GFP_KERNEL);
+ if (!parent_name)
+ return -ENOMEM;
+
+ clk_name = devm_kzalloc(dev, 32, GFP_KERNEL);
+ if (!clk_name)
+ return -ENOMEM;
+
+ pll_28nm->bytediv = bytediv;
+
+ snprintf(vco_name, 32, "dsi%dvco_clk", pll_28nm->id);
+ vco_init.name = vco_name;
+
+ pll_28nm->base.clk_hw.init = &vco_init;
+
+ clks[num++] = clk_register(dev, &pll_28nm->base.clk_hw);
+
+ /* prepare and register bytediv */
+ bytediv->hw.init = &bytediv_init;
+ bytediv->reg = pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_9;
+
+ snprintf(parent_name, 32, "dsi%dvco_clk", pll_28nm->id);
+ snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->id);
+
+ bytediv_init.name = clk_name;
+ bytediv_init.ops = &clk_bytediv_ops;
+ bytediv_init.flags = CLK_SET_RATE_PARENT;
+ bytediv_init.parent_names = (const char * const *) &parent_name;
+ bytediv_init.num_parents = 1;
+
+ /* DIV2 */
+ clks[num++] = provided_clks[DSI_BYTE_PLL_CLK] =
+ clk_register(dev, &bytediv->hw);
+
+ snprintf(clk_name, 32, "dsi%dpll", pll_28nm->id);
+ /* DIV3 */
+ clks[num++] = provided_clks[DSI_PIXEL_PLL_CLK] =
+ clk_register_divider(dev, clk_name,
+ parent_name, 0, pll_28nm->mmio +
+ REG_DSI_28nm_8960_PHY_PLL_CTRL_10,
+ 0, 8, 0, NULL);
+
+ pll_28nm->num_clks = num;
+
+ pll_28nm->clk_data.clk_num = NUM_PROVIDED_CLKS;
+ pll_28nm->clk_data.clks = provided_clks;
+
+ ret = of_clk_add_provider(dev->of_node,
+ of_clk_src_onecell_get, &pll_28nm->clk_data);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev,
+ int id)
+{
+ struct dsi_pll_28nm *pll_28nm;
+ struct msm_dsi_pll *pll;
+ int ret;
+
+ if (!pdev)
+ return ERR_PTR(-ENODEV);
+
+ pll_28nm = devm_kzalloc(&pdev->dev, sizeof(*pll_28nm), GFP_KERNEL);
+ if (!pll_28nm)
+ return ERR_PTR(-ENOMEM);
+
+ pll_28nm->pdev = pdev;
+ pll_28nm->id = id + 1;
+
+ pll_28nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL");
+ if (IS_ERR_OR_NULL(pll_28nm->mmio)) {
+ DRM_DEV_ERROR(&pdev->dev, "%s: failed to map pll base\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ pll = &pll_28nm->base;
+ pll->min_rate = VCO_MIN_RATE;
+ pll->max_rate = VCO_MAX_RATE;
+ pll->get_provider = dsi_pll_28nm_get_provider;
+ pll->destroy = dsi_pll_28nm_destroy;
+ pll->disable_seq = dsi_pll_28nm_disable_seq;
+ pll->save_state = dsi_pll_28nm_save_state;
+ pll->restore_state = dsi_pll_28nm_restore_state;
+
+ pll->en_seq_cnt = 1;
+ pll->enable_seqs[0] = dsi_pll_28nm_enable_seq;
+
+ ret = pll_28nm_register(pll_28nm);
+ if (ret) {
+ DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
+ return ERR_PTR(ret);
+ }
+
+ return pll;
+}
+
static void dsi_28nm_dphy_set_timing(struct msm_dsi_phy *phy,
struct msm_dsi_dphy_timing *timing)
{
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index 79c034ae075d..e85de26744b7 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -3,11 +3,915 @@
* Copyright (c) 2018, The Linux Foundation
*/
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/iopoll.h>
+#include "dsi_pll.h"
#include "dsi_phy.h"
#include "dsi.xml.h"
+/*
+ * DSI PLL 7nm - clock diagram (eg: DSI0): TODO: updated CPHY diagram
+ *
+ * dsi0_pll_out_div_clk dsi0_pll_bit_clk
+ * | |
+ * | |
+ * +---------+ | +----------+ | +----+
+ * dsi0vco_clk ---| out_div |--o--| divl_3_0 |--o--| /8 |-- dsi0_phy_pll_out_byteclk
+ * +---------+ | +----------+ | +----+
+ * | |
+ * | | dsi0_pll_by_2_bit_clk
+ * | | |
+ * | | +----+ | |\ dsi0_pclk_mux
+ * | |--| /2 |--o--| \ |
+ * | | +----+ | \ | +---------+
+ * | --------------| |--o--| div_7_4 |-- dsi0_phy_pll_out_dsiclk
+ * |------------------------------| / +---------+
+ * | +-----+ | /
+ * -----------| /4? |--o----------|/
+ * +-----+ | |
+ * | |dsiclk_sel
+ * |
+ * dsi0_pll_post_out_div_clk
+ */
+
+#define DSI_BYTE_PLL_CLK 0
+#define DSI_PIXEL_PLL_CLK 1
+#define NUM_PROVIDED_CLKS 2
+
+#define VCO_REF_CLK_RATE 19200000
+
+struct dsi_pll_regs {
+ u32 pll_prop_gain_rate;
+ u32 pll_lockdet_rate;
+ u32 decimal_div_start;
+ u32 frac_div_start_low;
+ u32 frac_div_start_mid;
+ u32 frac_div_start_high;
+ u32 pll_clock_inverters;
+ u32 ssc_stepsize_low;
+ u32 ssc_stepsize_high;
+ u32 ssc_div_per_low;
+ u32 ssc_div_per_high;
+ u32 ssc_adjper_low;
+ u32 ssc_adjper_high;
+ u32 ssc_control;
+};
+
+struct dsi_pll_config {
+ u32 ref_freq;
+ bool div_override;
+ u32 output_div;
+ bool ignore_frac;
+ bool disable_prescaler;
+ bool enable_ssc;
+ bool ssc_center;
+ u32 dec_bits;
+ u32 frac_bits;
+ u32 lock_timer;
+ u32 ssc_freq;
+ u32 ssc_offset;
+ u32 ssc_adj_per;
+ u32 thresh_cycles;
+ u32 refclk_cycles;
+};
+
+struct pll_7nm_cached_state {
+ unsigned long vco_rate;
+ u8 bit_clk_div;
+ u8 pix_clk_div;
+ u8 pll_out_div;
+ u8 pll_mux;
+};
+
+struct dsi_pll_7nm {
+ struct msm_dsi_pll base;
+
+ int id;
+ struct platform_device *pdev;
+
+ void __iomem *phy_cmn_mmio;
+ void __iomem *mmio;
+
+ u64 vco_ref_clk_rate;
+ u64 vco_current_rate;
+
+ /* protects REG_DSI_7nm_PHY_CMN_CLK_CFG0 register */
+ spinlock_t postdiv_lock;
+
+ int vco_delay;
+ struct dsi_pll_config pll_configuration;
+ struct dsi_pll_regs reg_setup;
+
+ /* private clocks: */
+ struct clk_hw *out_div_clk_hw;
+ struct clk_hw *bit_clk_hw;
+ struct clk_hw *byte_clk_hw;
+ struct clk_hw *by_2_bit_clk_hw;
+ struct clk_hw *post_out_div_clk_hw;
+ struct clk_hw *pclk_mux_hw;
+ struct clk_hw *out_dsiclk_hw;
+
+ /* clock-provider: */
+ struct clk_hw_onecell_data *hw_data;
+
+ struct pll_7nm_cached_state cached_state;
+
+ enum msm_dsi_phy_usecase uc;
+ struct dsi_pll_7nm *slave;
+};
+
+#define to_pll_7nm(x) container_of(x, struct dsi_pll_7nm, base)
+
+/*
+ * Global list of private DSI PLL struct pointers. We need this for Dual DSI
+ * mode, where the master PLL's clk_ops needs access the slave's private data
+ */
+static struct dsi_pll_7nm *pll_7nm_list[DSI_MAX];
+
+static void dsi_pll_setup_config(struct dsi_pll_7nm *pll)
+{
+ struct dsi_pll_config *config = &pll->pll_configuration;
+
+ config->ref_freq = pll->vco_ref_clk_rate;
+ config->output_div = 1;
+ config->dec_bits = 8;
+ config->frac_bits = 18;
+ config->lock_timer = 64;
+ config->ssc_freq = 31500;
+ config->ssc_offset = 4800;
+ config->ssc_adj_per = 2;
+ config->thresh_cycles = 32;
+ config->refclk_cycles = 256;
+
+ config->div_override = false;
+ config->ignore_frac = false;
+ config->disable_prescaler = false;
+
+ /* TODO: ssc enable */
+ config->enable_ssc = false;
+ config->ssc_center = 0;
+}
+
+static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll)
+{
+ struct dsi_pll_config *config = &pll->pll_configuration;
+ struct dsi_pll_regs *regs = &pll->reg_setup;
+ u64 fref = pll->vco_ref_clk_rate;
+ u64 pll_freq;
+ u64 divider;
+ u64 dec, dec_multiple;
+ u32 frac;
+ u64 multiplier;
+
+ pll_freq = pll->vco_current_rate;
+
+ if (config->disable_prescaler)
+ divider = fref;
+ else
+ divider = fref * 2;
+
+ multiplier = 1 << config->frac_bits;
+ dec_multiple = div_u64(pll_freq * multiplier, divider);
+ div_u64_rem(dec_multiple, multiplier, &frac);
+
+ dec = div_u64(dec_multiple, multiplier);
+
+ if (pll->base.type != MSM_DSI_PHY_7NM_V4_1)
+ regs->pll_clock_inverters = 0x28;
+ else if (pll_freq <= 1000000000ULL)
+ regs->pll_clock_inverters = 0xa0;
+ else if (pll_freq <= 2500000000ULL)
+ regs->pll_clock_inverters = 0x20;
+ else if (pll_freq <= 3020000000ULL)
+ regs->pll_clock_inverters = 0x00;
+ else
+ regs->pll_clock_inverters = 0x40;
+
+ regs->pll_lockdet_rate = config->lock_timer;
+ regs->decimal_div_start = dec;
+ regs->frac_div_start_low = (frac & 0xff);
+ regs->frac_div_start_mid = (frac & 0xff00) >> 8;
+ regs->frac_div_start_high = (frac & 0x30000) >> 16;
+}
+
+#define SSC_CENTER BIT(0)
+#define SSC_EN BIT(1)
+
+static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll)
+{
+ struct dsi_pll_config *config = &pll->pll_configuration;
+ struct dsi_pll_regs *regs = &pll->reg_setup;
+ u32 ssc_per;
+ u32 ssc_mod;
+ u64 ssc_step_size;
+ u64 frac;
+
+ if (!config->enable_ssc) {
+ DBG("SSC not enabled\n");
+ return;
+ }
+
+ ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / 2 - 1;
+ ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1);
+ ssc_per -= ssc_mod;
+
+ frac = regs->frac_div_start_low |
+ (regs->frac_div_start_mid << 8) |
+ (regs->frac_div_start_high << 16);
+ ssc_step_size = regs->decimal_div_start;
+ ssc_step_size *= (1 << config->frac_bits);
+ ssc_step_size += frac;
+ ssc_step_size *= config->ssc_offset;
+ ssc_step_size *= (config->ssc_adj_per + 1);
+ ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1));
+ ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000);
+
+ regs->ssc_div_per_low = ssc_per & 0xFF;
+ regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8;
+ regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF);
+ regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8);
+ regs->ssc_adjper_low = config->ssc_adj_per & 0xFF;
+ regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8;
+
+ regs->ssc_control = config->ssc_center ? SSC_CENTER : 0;
+
+ pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n",
+ regs->decimal_div_start, frac, config->frac_bits);
+ pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n",
+ ssc_per, (u32)ssc_step_size, config->ssc_adj_per);
+}
+
+static void dsi_pll_ssc_commit(struct dsi_pll_7nm *pll)
+{
+ void __iomem *base = pll->mmio;
+ struct dsi_pll_regs *regs = &pll->reg_setup;
+
+ if (pll->pll_configuration.enable_ssc) {
+ pr_debug("SSC is enabled\n");
+
+ pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_LOW_1,
+ regs->ssc_stepsize_low);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_HIGH_1,
+ regs->ssc_stepsize_high);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_LOW_1,
+ regs->ssc_div_per_low);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_HIGH_1,
+ regs->ssc_div_per_high);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_LOW_1,
+ regs->ssc_adjper_low);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_HIGH_1,
+ regs->ssc_adjper_high);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_CONTROL,
+ SSC_EN | regs->ssc_control);
+ }
+}
+
+static void dsi_pll_config_hzindep_reg(struct dsi_pll_7nm *pll)
+{
+ void __iomem *base = pll->mmio;
+ u8 analog_controls_five_1 = 0x01, vco_config_1 = 0x00;
+
+ if (pll->base.type == MSM_DSI_PHY_7NM_V4_1) {
+ if (pll->vco_current_rate >= 3100000000ULL)
+ analog_controls_five_1 = 0x03;
+
+ if (pll->vco_current_rate < 1520000000ULL)
+ vco_config_1 = 0x08;
+ else if (pll->vco_current_rate < 2990000000ULL)
+ vco_config_1 = 0x01;
+ }
+
+ pll_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_FIVE_1,
+ analog_controls_five_1);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_VCO_CONFIG_1, vco_config_1);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_FIVE, 0x01);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_TWO, 0x03);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_THREE, 0x00);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_DSM_DIVIDER, 0x00);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_FEEDBACK_DIVIDER, 0x4e);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_CALIBRATION_SETTINGS, 0x40);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_BAND_SEL_CAL_SETTINGS_THREE, 0xba);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_FREQ_DETECT_SETTINGS_ONE, 0x0c);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_OUTDIV, 0x00);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_CORE_OVERRIDE, 0x00);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_DIGITAL_TIMERS_TWO, 0x08);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_PROP_GAIN_RATE_1, 0x0a);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_BAND_SEL_RATE_1, 0xc0);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_INT_GAIN_IFILT_BAND_1, 0x84);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_INT_GAIN_IFILT_BAND_1, 0x82);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_FL_INT_GAIN_PFILT_BAND_1, 0x4c);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCK_OVERRIDE, 0x80);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_PFILT, 0x29);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_PFILT, 0x2f);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_IFILT, 0x2a);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_IFILT,
+ pll->base.type == MSM_DSI_PHY_7NM_V4_1 ? 0x3f : 0x22);
+
+ if (pll->base.type == MSM_DSI_PHY_7NM_V4_1) {
+ pll_write(base + REG_DSI_7nm_PHY_PLL_PERF_OPTIMIZE, 0x22);
+ if (pll->slave)
+ pll_write(pll->slave->mmio + REG_DSI_7nm_PHY_PLL_PERF_OPTIMIZE, 0x22);
+ }
+}
+
+static void dsi_pll_commit(struct dsi_pll_7nm *pll)
+{
+ void __iomem *base = pll->mmio;
+ struct dsi_pll_regs *reg = &pll->reg_setup;
+
+ pll_write(base + REG_DSI_7nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1, reg->decimal_div_start);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1, reg->frac_div_start_low);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1, reg->frac_div_start_mid);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1, reg->frac_div_start_high);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, 0x40);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCK_DELAY, 0x06);
+ pll_write(base + REG_DSI_7nm_PHY_PLL_CMODE_1, 0x10); /* TODO: 0x00 for CPHY */
+ pll_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS, reg->pll_clock_inverters);
+}
+
+static int dsi_pll_7nm_vco_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll);
+
+ DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_7nm->id, rate,
+ parent_rate);
+
+ pll_7nm->vco_current_rate = rate;
+ pll_7nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;
+
+ dsi_pll_setup_config(pll_7nm);
+
+ dsi_pll_calc_dec_frac(pll_7nm);
+
+ dsi_pll_calc_ssc(pll_7nm);
+
+ dsi_pll_commit(pll_7nm);
+
+ dsi_pll_config_hzindep_reg(pll_7nm);
+
+ dsi_pll_ssc_commit(pll_7nm);
+
+ /* flush, ensure all register writes are done*/
+ wmb();
+
+ return 0;
+}
+
+static int dsi_pll_7nm_lock_status(struct dsi_pll_7nm *pll)
+{
+ int rc;
+ u32 status = 0;
+ u32 const delay_us = 100;
+ u32 const timeout_us = 5000;
+
+ rc = readl_poll_timeout_atomic(pll->mmio +
+ REG_DSI_7nm_PHY_PLL_COMMON_STATUS_ONE,
+ status,
+ ((status & BIT(0)) > 0),
+ delay_us,
+ timeout_us);
+ if (rc)
+ pr_err("DSI PLL(%d) lock failed, status=0x%08x\n",
+ pll->id, status);
+
+ return rc;
+}
+
+static void dsi_pll_disable_pll_bias(struct dsi_pll_7nm *pll)
+{
+ u32 data = pll_read(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CTRL_0);
+
+ pll_write(pll->mmio + REG_DSI_7nm_PHY_PLL_SYSTEM_MUXES, 0);
+ pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CTRL_0, data & ~BIT(5));
+ ndelay(250);
+}
+
+static void dsi_pll_enable_pll_bias(struct dsi_pll_7nm *pll)
+{
+ u32 data = pll_read(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CTRL_0);
+
+ pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CTRL_0, data | BIT(5));
+ pll_write(pll->mmio + REG_DSI_7nm_PHY_PLL_SYSTEM_MUXES, 0xc0);
+ ndelay(250);
+}
+
+static void dsi_pll_disable_global_clk(struct dsi_pll_7nm *pll)
+{
+ u32 data;
+
+ data = pll_read(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
+ pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CLK_CFG1, data & ~BIT(5));
+}
+
+static void dsi_pll_enable_global_clk(struct dsi_pll_7nm *pll)
+{
+ u32 data;
+
+ pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CTRL_3, 0x04);
+
+ data = pll_read(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
+ pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CLK_CFG1,
+ data | BIT(5) | BIT(4));
+}
+
+static void dsi_pll_phy_dig_reset(struct dsi_pll_7nm *pll)
+{
+ /*
+ * Reset the PHY digital domain. This would be needed when
+ * coming out of a CX or analog rail power collapse while
+ * ensuring that the pads maintain LP00 or LP11 state
+ */
+ pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE4, BIT(0));
+ wmb(); /* Ensure that the reset is deasserted */
+ pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE4, 0x0);
+ wmb(); /* Ensure that the reset is deasserted */
+}
+
+static int dsi_pll_7nm_vco_prepare(struct clk_hw *hw)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll);
+ int rc;
+
+ dsi_pll_enable_pll_bias(pll_7nm);
+ if (pll_7nm->slave)
+ dsi_pll_enable_pll_bias(pll_7nm->slave);
+
+ /* Start PLL */
+ pll_write(pll_7nm->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_PLL_CNTRL, 0x01);
+
+ /*
+ * ensure all PLL configurations are written prior to checking
+ * for PLL lock.
+ */
+ wmb();
+
+ /* Check for PLL lock */
+ rc = dsi_pll_7nm_lock_status(pll_7nm);
+ if (rc) {
+ pr_err("PLL(%d) lock failed\n", pll_7nm->id);
+ goto error;
+ }
+
+ pll->pll_on = true;
+
+ /*
+ * assert power on reset for PHY digital in case the PLL is
+ * enabled after CX of analog domain power collapse. This needs
+ * to be done before enabling the global clk.
+ */
+ dsi_pll_phy_dig_reset(pll_7nm);
+ if (pll_7nm->slave)
+ dsi_pll_phy_dig_reset(pll_7nm->slave);
+
+ dsi_pll_enable_global_clk(pll_7nm);
+ if (pll_7nm->slave)
+ dsi_pll_enable_global_clk(pll_7nm->slave);
+
+error:
+ return rc;
+}
+
+static void dsi_pll_disable_sub(struct dsi_pll_7nm *pll)
+{
+ pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_RBUF_CTRL, 0);
+ dsi_pll_disable_pll_bias(pll);
+}
+
+static void dsi_pll_7nm_vco_unprepare(struct clk_hw *hw)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll);
+
+ /*
+ * To avoid any stray glitches while abruptly powering down the PLL
+ * make sure to gate the clock using the clock enable bit before
+ * powering down the PLL
+ */
+ dsi_pll_disable_global_clk(pll_7nm);
+ pll_write(pll_7nm->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_PLL_CNTRL, 0);
+ dsi_pll_disable_sub(pll_7nm);
+ if (pll_7nm->slave) {
+ dsi_pll_disable_global_clk(pll_7nm->slave);
+ dsi_pll_disable_sub(pll_7nm->slave);
+ }
+ /* flush, ensure all register writes are done */
+ wmb();
+ pll->pll_on = false;
+}
+
+static unsigned long dsi_pll_7nm_vco_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll);
+ void __iomem *base = pll_7nm->mmio;
+ u64 ref_clk = pll_7nm->vco_ref_clk_rate;
+ u64 vco_rate = 0x0;
+ u64 multiplier;
+ u32 frac;
+ u32 dec;
+ u64 pll_freq, tmp64;
+
+ dec = pll_read(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1);
+ dec &= 0xff;
+
+ frac = pll_read(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1);
+ frac |= ((pll_read(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1) &
+ 0xff) << 8);
+ frac |= ((pll_read(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1) &
+ 0x3) << 16);
+
+ /*
+ * TODO:
+ * 1. Assumes prescaler is disabled
+ * 2. Multiplier is 2^18. it should be 2^(num_of_frac_bits)
+ */
+ multiplier = 1 << 18;
+ pll_freq = dec * (ref_clk * 2);
+ tmp64 = (ref_clk * 2 * frac);
+ pll_freq += div_u64(tmp64, multiplier);
+
+ vco_rate = pll_freq;
+
+ DBG("DSI PLL%d returning vco rate = %lu, dec = %x, frac = %x",
+ pll_7nm->id, (unsigned long)vco_rate, dec, frac);
+
+ return (unsigned long)vco_rate;
+}
+
+static const struct clk_ops clk_ops_dsi_pll_7nm_vco = {
+ .round_rate = msm_dsi_pll_helper_clk_round_rate,
+ .set_rate = dsi_pll_7nm_vco_set_rate,
+ .recalc_rate = dsi_pll_7nm_vco_recalc_rate,
+ .prepare = dsi_pll_7nm_vco_prepare,
+ .unprepare = dsi_pll_7nm_vco_unprepare,
+};
+
+/*
+ * PLL Callbacks
+ */
+
+static void dsi_pll_7nm_save_state(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll);
+ struct pll_7nm_cached_state *cached = &pll_7nm->cached_state;
+ void __iomem *phy_base = pll_7nm->phy_cmn_mmio;
+ u32 cmn_clk_cfg0, cmn_clk_cfg1;
+
+ cached->pll_out_div = pll_read(pll_7nm->mmio +
+ REG_DSI_7nm_PHY_PLL_PLL_OUTDIV_RATE);
+ cached->pll_out_div &= 0x3;
+
+ cmn_clk_cfg0 = pll_read(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG0);
+ cached->bit_clk_div = cmn_clk_cfg0 & 0xf;
+ cached->pix_clk_div = (cmn_clk_cfg0 & 0xf0) >> 4;
+
+ cmn_clk_cfg1 = pll_read(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
+ cached->pll_mux = cmn_clk_cfg1 & 0x3;
+
+ DBG("DSI PLL%d outdiv %x bit_clk_div %x pix_clk_div %x pll_mux %x",
+ pll_7nm->id, cached->pll_out_div, cached->bit_clk_div,
+ cached->pix_clk_div, cached->pll_mux);
+}
+
+static int dsi_pll_7nm_restore_state(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll);
+ struct pll_7nm_cached_state *cached = &pll_7nm->cached_state;
+ void __iomem *phy_base = pll_7nm->phy_cmn_mmio;
+ u32 val;
+ int ret;
+
+ val = pll_read(pll_7nm->mmio + REG_DSI_7nm_PHY_PLL_PLL_OUTDIV_RATE);
+ val &= ~0x3;
+ val |= cached->pll_out_div;
+ pll_write(pll_7nm->mmio + REG_DSI_7nm_PHY_PLL_PLL_OUTDIV_RATE, val);
+
+ pll_write(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG0,
+ cached->bit_clk_div | (cached->pix_clk_div << 4));
+
+ val = pll_read(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
+ val &= ~0x3;
+ val |= cached->pll_mux;
+ pll_write(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1, val);
+
+ ret = dsi_pll_7nm_vco_set_rate(&pll->clk_hw, pll_7nm->vco_current_rate, pll_7nm->vco_ref_clk_rate);
+ if (ret) {
+ DRM_DEV_ERROR(&pll_7nm->pdev->dev,
+ "restore vco rate failed. ret=%d\n", ret);
+ return ret;
+ }
+
+ DBG("DSI PLL%d", pll_7nm->id);
+
+ return 0;
+}
+
+static int dsi_pll_7nm_set_usecase(struct msm_dsi_pll *pll,
+ enum msm_dsi_phy_usecase uc)
+{
+ struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll);
+ void __iomem *base = pll_7nm->phy_cmn_mmio;
+ u32 data = 0x0; /* internal PLL */
+
+ DBG("DSI PLL%d", pll_7nm->id);
+
+ switch (uc) {
+ case MSM_DSI_PHY_STANDALONE:
+ break;
+ case MSM_DSI_PHY_MASTER:
+ pll_7nm->slave = pll_7nm_list[(pll_7nm->id + 1) % DSI_MAX];
+ break;
+ case MSM_DSI_PHY_SLAVE:
+ data = 0x1; /* external PLL */
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* set PLL src */
+ pll_write(base + REG_DSI_7nm_PHY_CMN_CLK_CFG1, (data << 2));
+
+ pll_7nm->uc = uc;
+
+ return 0;
+}
+
+static int dsi_pll_7nm_get_provider(struct msm_dsi_pll *pll,
+ struct clk **byte_clk_provider,
+ struct clk **pixel_clk_provider)
+{
+ struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll);
+ struct clk_hw_onecell_data *hw_data = pll_7nm->hw_data;
+
+ DBG("DSI PLL%d", pll_7nm->id);
+
+ if (byte_clk_provider)
+ *byte_clk_provider = hw_data->hws[DSI_BYTE_PLL_CLK]->clk;
+ if (pixel_clk_provider)
+ *pixel_clk_provider = hw_data->hws[DSI_PIXEL_PLL_CLK]->clk;
+
+ return 0;
+}
+
+static void dsi_pll_7nm_destroy(struct msm_dsi_pll *pll)
+{
+ struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll);
+ struct device *dev = &pll_7nm->pdev->dev;
+
+ DBG("DSI PLL%d", pll_7nm->id);
+ of_clk_del_provider(dev->of_node);
+
+ clk_hw_unregister_divider(pll_7nm->out_dsiclk_hw);
+ clk_hw_unregister_mux(pll_7nm->pclk_mux_hw);
+ clk_hw_unregister_fixed_factor(pll_7nm->post_out_div_clk_hw);
+ clk_hw_unregister_fixed_factor(pll_7nm->by_2_bit_clk_hw);
+ clk_hw_unregister_fixed_factor(pll_7nm->byte_clk_hw);
+ clk_hw_unregister_divider(pll_7nm->bit_clk_hw);
+ clk_hw_unregister_divider(pll_7nm->out_div_clk_hw);
+ clk_hw_unregister(&pll_7nm->base.clk_hw);
+}
+
+/*
+ * The post dividers and mux clocks are created using the standard divider and
+ * mux API. Unlike the 14nm PHY, the slave PLL doesn't need its dividers/mux
+ * state to follow the master PLL's divider/mux state. Therefore, we don't
+ * require special clock ops that also configure the slave PLL registers
+ */
+static int pll_7nm_register(struct dsi_pll_7nm *pll_7nm)
+{
+ char clk_name[32], parent[32], vco_name[32];
+ char parent2[32], parent3[32], parent4[32];
+ struct clk_init_data vco_init = {
+ .parent_names = (const char *[]){ "bi_tcxo" },
+ .num_parents = 1,
+ .name = vco_name,
+ .flags = CLK_IGNORE_UNUSED,
+ .ops = &clk_ops_dsi_pll_7nm_vco,
+ };
+ struct device *dev = &pll_7nm->pdev->dev;
+ struct clk_hw_onecell_data *hw_data;
+ struct clk_hw *hw;
+ int ret;
+
+ DBG("DSI%d", pll_7nm->id);
+
+ hw_data = devm_kzalloc(dev, sizeof(*hw_data) +
+ NUM_PROVIDED_CLKS * sizeof(struct clk_hw *),
+ GFP_KERNEL);
+ if (!hw_data)
+ return -ENOMEM;
+
+ snprintf(vco_name, 32, "dsi%dvco_clk", pll_7nm->id);
+ pll_7nm->base.clk_hw.init = &vco_init;
+
+ ret = clk_hw_register(dev, &pll_7nm->base.clk_hw);
+ if (ret)
+ return ret;
+
+ snprintf(clk_name, 32, "dsi%d_pll_out_div_clk", pll_7nm->id);
+ snprintf(parent, 32, "dsi%dvco_clk", pll_7nm->id);
+
+ hw = clk_hw_register_divider(dev, clk_name,
+ parent, CLK_SET_RATE_PARENT,
+ pll_7nm->mmio +
+ REG_DSI_7nm_PHY_PLL_PLL_OUTDIV_RATE,
+ 0, 2, CLK_DIVIDER_POWER_OF_TWO, NULL);
+ if (IS_ERR(hw)) {
+ ret = PTR_ERR(hw);
+ goto err_base_clk_hw;
+ }
+
+ pll_7nm->out_div_clk_hw = hw;
+
+ snprintf(clk_name, 32, "dsi%d_pll_bit_clk", pll_7nm->id);
+ snprintf(parent, 32, "dsi%d_pll_out_div_clk", pll_7nm->id);
+
+ /* BIT CLK: DIV_CTRL_3_0 */
+ hw = clk_hw_register_divider(dev, clk_name, parent,
+ CLK_SET_RATE_PARENT,
+ pll_7nm->phy_cmn_mmio +
+ REG_DSI_7nm_PHY_CMN_CLK_CFG0,
+ 0, 4, CLK_DIVIDER_ONE_BASED,
+ &pll_7nm->postdiv_lock);
+ if (IS_ERR(hw)) {
+ ret = PTR_ERR(hw);
+ goto err_out_div_clk_hw;
+ }
+
+ pll_7nm->bit_clk_hw = hw;
+
+ snprintf(clk_name, 32, "dsi%d_phy_pll_out_byteclk", pll_7nm->id);
+ snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_7nm->id);
+
+ /* DSI Byte clock = VCO_CLK / OUT_DIV / BIT_DIV / 8 */
+ hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
+ CLK_SET_RATE_PARENT, 1, 8);
+ if (IS_ERR(hw)) {
+ ret = PTR_ERR(hw);
+ goto err_bit_clk_hw;
+ }
+
+ pll_7nm->byte_clk_hw = hw;
+ hw_data->hws[DSI_BYTE_PLL_CLK] = hw;
+
+ snprintf(clk_name, 32, "dsi%d_pll_by_2_bit_clk", pll_7nm->id);
+ snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_7nm->id);
+
+ hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
+ 0, 1, 2);
+ if (IS_ERR(hw)) {
+ ret = PTR_ERR(hw);
+ goto err_byte_clk_hw;
+ }
+
+ pll_7nm->by_2_bit_clk_hw = hw;
+
+ snprintf(clk_name, 32, "dsi%d_pll_post_out_div_clk", pll_7nm->id);
+ snprintf(parent, 32, "dsi%d_pll_out_div_clk", pll_7nm->id);
+
+ hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
+ 0, 1, 4);
+ if (IS_ERR(hw)) {
+ ret = PTR_ERR(hw);
+ goto err_by_2_bit_clk_hw;
+ }
+
+ pll_7nm->post_out_div_clk_hw = hw;
+
+ snprintf(clk_name, 32, "dsi%d_pclk_mux", pll_7nm->id);
+ snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_7nm->id);
+ snprintf(parent2, 32, "dsi%d_pll_by_2_bit_clk", pll_7nm->id);
+ snprintf(parent3, 32, "dsi%d_pll_out_div_clk", pll_7nm->id);
+ snprintf(parent4, 32, "dsi%d_pll_post_out_div_clk", pll_7nm->id);
+
+ hw = clk_hw_register_mux(dev, clk_name,
+ ((const char *[]){
+ parent, parent2, parent3, parent4
+ }), 4, 0, pll_7nm->phy_cmn_mmio +
+ REG_DSI_7nm_PHY_CMN_CLK_CFG1,
+ 0, 2, 0, NULL);
+ if (IS_ERR(hw)) {
+ ret = PTR_ERR(hw);
+ goto err_post_out_div_clk_hw;
+ }
+
+ pll_7nm->pclk_mux_hw = hw;
+
+ snprintf(clk_name, 32, "dsi%d_phy_pll_out_dsiclk", pll_7nm->id);
+ snprintf(parent, 32, "dsi%d_pclk_mux", pll_7nm->id);
+
+ /* PIX CLK DIV : DIV_CTRL_7_4*/
+ hw = clk_hw_register_divider(dev, clk_name, parent,
+ 0, pll_7nm->phy_cmn_mmio +
+ REG_DSI_7nm_PHY_CMN_CLK_CFG0,
+ 4, 4, CLK_DIVIDER_ONE_BASED,
+ &pll_7nm->postdiv_lock);
+ if (IS_ERR(hw)) {
+ ret = PTR_ERR(hw);
+ goto err_pclk_mux_hw;
+ }
+
+ pll_7nm->out_dsiclk_hw = hw;
+ hw_data->hws[DSI_PIXEL_PLL_CLK] = hw;
+
+ hw_data->num = NUM_PROVIDED_CLKS;
+ pll_7nm->hw_data = hw_data;
+
+ ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+ pll_7nm->hw_data);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret);
+ goto err_dsiclk_hw;
+ }
+
+ return 0;
+
+err_dsiclk_hw:
+ clk_hw_unregister_divider(pll_7nm->out_dsiclk_hw);
+err_pclk_mux_hw:
+ clk_hw_unregister_mux(pll_7nm->pclk_mux_hw);
+err_post_out_div_clk_hw:
+ clk_hw_unregister_fixed_factor(pll_7nm->post_out_div_clk_hw);
+err_by_2_bit_clk_hw:
+ clk_hw_unregister_fixed_factor(pll_7nm->by_2_bit_clk_hw);
+err_byte_clk_hw:
+ clk_hw_unregister_fixed_factor(pll_7nm->byte_clk_hw);
+err_bit_clk_hw:
+ clk_hw_unregister_divider(pll_7nm->bit_clk_hw);
+err_out_div_clk_hw:
+ clk_hw_unregister_divider(pll_7nm->out_div_clk_hw);
+err_base_clk_hw:
+ clk_hw_unregister(&pll_7nm->base.clk_hw);
+
+ return ret;
+}
+
+struct msm_dsi_pll *msm_dsi_pll_7nm_init(struct platform_device *pdev, int id)
+{
+ struct dsi_pll_7nm *pll_7nm;
+ struct msm_dsi_pll *pll;
+ int ret;
+
+ pll_7nm = devm_kzalloc(&pdev->dev, sizeof(*pll_7nm), GFP_KERNEL);
+ if (!pll_7nm)
+ return ERR_PTR(-ENOMEM);
+
+ DBG("DSI PLL%d", id);
+
+ pll_7nm->pdev = pdev;
+ pll_7nm->id = id;
+ pll_7nm_list[id] = pll_7nm;
+
+ pll_7nm->phy_cmn_mmio = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
+ if (IS_ERR_OR_NULL(pll_7nm->phy_cmn_mmio)) {
+ DRM_DEV_ERROR(&pdev->dev, "failed to map CMN PHY base\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ pll_7nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL");
+ if (IS_ERR_OR_NULL(pll_7nm->mmio)) {
+ DRM_DEV_ERROR(&pdev->dev, "failed to map PLL base\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ spin_lock_init(&pll_7nm->postdiv_lock);
+
+ pll = &pll_7nm->base;
+ pll->min_rate = 1000000000UL;
+ pll->max_rate = 3500000000UL;
+ if (pll->type == MSM_DSI_PHY_7NM_V4_1) {
+ pll->min_rate = 600000000UL;
+ pll->max_rate = (unsigned long)5000000000ULL;
+ /* workaround for max rate overflowing on 32-bit builds: */
+ pll->max_rate = max(pll->max_rate, 0xffffffffUL);
+ }
+ pll->get_provider = dsi_pll_7nm_get_provider;
+ pll->destroy = dsi_pll_7nm_destroy;
+ pll->save_state = dsi_pll_7nm_save_state;
+ pll->restore_state = dsi_pll_7nm_restore_state;
+ pll->set_usecase = dsi_pll_7nm_set_usecase;
+
+ pll_7nm->vco_delay = 1;
+
+ ret = pll_7nm_register(pll_7nm);
+ if (ret) {
+ DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
+ return ERR_PTR(ret);
+ }
+
+ /* TODO: Remove this when we have proper display handover support */
+ msm_dsi_pll_save_state(pll);
+
+ return pll;
+}
+
static int dsi_phy_hw_v4_0_is_pll_on(struct msm_dsi_phy *phy)
{
void __iomem *base = phy->base;
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c b/drivers/gpu/drm/msm/dsi/phy/dsi_pll.c
similarity index 100%
rename from drivers/gpu/drm/msm/dsi/pll/dsi_pll.c
rename to drivers/gpu/drm/msm/dsi/phy/dsi_pll.c
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h b/drivers/gpu/drm/msm/dsi/phy/dsi_pll.h
similarity index 100%
rename from drivers/gpu/drm/msm/dsi/pll/dsi_pll.h
rename to drivers/gpu/drm/msm/dsi/phy/dsi_pll.h
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
deleted file mode 100644
index de3b802ccd3d..000000000000
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
+++ /dev/null
@@ -1,881 +0,0 @@
-/*
- * SPDX-License-Identifier: GPL-2.0
- * Copyright (c) 2018, The Linux Foundation
- */
-
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/iopoll.h>
-
-#include "dsi_pll.h"
-#include "dsi.xml.h"
-
-/*
- * DSI PLL 10nm - clock diagram (eg: DSI0):
- *
- * dsi0_pll_out_div_clk dsi0_pll_bit_clk
- * | |
- * | |
- * +---------+ | +----------+ | +----+
- * dsi0vco_clk ---| out_div |--o--| divl_3_0 |--o--| /8 |-- dsi0_phy_pll_out_byteclk
- * +---------+ | +----------+ | +----+
- * | |
- * | | dsi0_pll_by_2_bit_clk
- * | | |
- * | | +----+ | |\ dsi0_pclk_mux
- * | |--| /2 |--o--| \ |
- * | | +----+ | \ | +---------+
- * | --------------| |--o--| div_7_4 |-- dsi0_phy_pll_out_dsiclk
- * |------------------------------| / +---------+
- * | +-----+ | /
- * -----------| /4? |--o----------|/
- * +-----+ | |
- * | |dsiclk_sel
- * |
- * dsi0_pll_post_out_div_clk
- */
-
-#define DSI_BYTE_PLL_CLK 0
-#define DSI_PIXEL_PLL_CLK 1
-#define NUM_PROVIDED_CLKS 2
-
-#define VCO_REF_CLK_RATE 19200000
-
-struct dsi_pll_regs {
- u32 pll_prop_gain_rate;
- u32 pll_lockdet_rate;
- u32 decimal_div_start;
- u32 frac_div_start_low;
- u32 frac_div_start_mid;
- u32 frac_div_start_high;
- u32 pll_clock_inverters;
- u32 ssc_stepsize_low;
- u32 ssc_stepsize_high;
- u32 ssc_div_per_low;
- u32 ssc_div_per_high;
- u32 ssc_adjper_low;
- u32 ssc_adjper_high;
- u32 ssc_control;
-};
-
-struct dsi_pll_config {
- u32 ref_freq;
- bool div_override;
- u32 output_div;
- bool ignore_frac;
- bool disable_prescaler;
- bool enable_ssc;
- bool ssc_center;
- u32 dec_bits;
- u32 frac_bits;
- u32 lock_timer;
- u32 ssc_freq;
- u32 ssc_offset;
- u32 ssc_adj_per;
- u32 thresh_cycles;
- u32 refclk_cycles;
-};
-
-struct pll_10nm_cached_state {
- unsigned long vco_rate;
- u8 bit_clk_div;
- u8 pix_clk_div;
- u8 pll_out_div;
- u8 pll_mux;
-};
-
-struct dsi_pll_10nm {
- struct msm_dsi_pll base;
-
- int id;
- struct platform_device *pdev;
-
- void __iomem *phy_cmn_mmio;
- void __iomem *mmio;
-
- u64 vco_ref_clk_rate;
- u64 vco_current_rate;
-
- /* protects REG_DSI_10nm_PHY_CMN_CLK_CFG0 register */
- spinlock_t postdiv_lock;
-
- int vco_delay;
- struct dsi_pll_config pll_configuration;
- struct dsi_pll_regs reg_setup;
-
- /* private clocks: */
- struct clk_hw *out_div_clk_hw;
- struct clk_hw *bit_clk_hw;
- struct clk_hw *byte_clk_hw;
- struct clk_hw *by_2_bit_clk_hw;
- struct clk_hw *post_out_div_clk_hw;
- struct clk_hw *pclk_mux_hw;
- struct clk_hw *out_dsiclk_hw;
-
- /* clock-provider: */
- struct clk_hw_onecell_data *hw_data;
-
- struct pll_10nm_cached_state cached_state;
-
- enum msm_dsi_phy_usecase uc;
- struct dsi_pll_10nm *slave;
-};
-
-#define to_pll_10nm(x) container_of(x, struct dsi_pll_10nm, base)
-
-/*
- * Global list of private DSI PLL struct pointers. We need this for Dual DSI
- * mode, where the master PLL's clk_ops needs access the slave's private data
- */
-static struct dsi_pll_10nm *pll_10nm_list[DSI_MAX];
-
-static void dsi_pll_setup_config(struct dsi_pll_10nm *pll)
-{
- struct dsi_pll_config *config = &pll->pll_configuration;
-
- config->ref_freq = pll->vco_ref_clk_rate;
- config->output_div = 1;
- config->dec_bits = 8;
- config->frac_bits = 18;
- config->lock_timer = 64;
- config->ssc_freq = 31500;
- config->ssc_offset = 5000;
- config->ssc_adj_per = 2;
- config->thresh_cycles = 32;
- config->refclk_cycles = 256;
-
- config->div_override = false;
- config->ignore_frac = false;
- config->disable_prescaler = false;
-
- config->enable_ssc = false;
- config->ssc_center = 0;
-}
-
-static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll)
-{
- struct dsi_pll_config *config = &pll->pll_configuration;
- struct dsi_pll_regs *regs = &pll->reg_setup;
- u64 fref = pll->vco_ref_clk_rate;
- u64 pll_freq;
- u64 divider;
- u64 dec, dec_multiple;
- u32 frac;
- u64 multiplier;
-
- pll_freq = pll->vco_current_rate;
-
- if (config->disable_prescaler)
- divider = fref;
- else
- divider = fref * 2;
-
- multiplier = 1 << config->frac_bits;
- dec_multiple = div_u64(pll_freq * multiplier, divider);
- dec = div_u64_rem(dec_multiple, multiplier, &frac);
-
- if (pll_freq <= 1900000000UL)
- regs->pll_prop_gain_rate = 8;
- else if (pll_freq <= 3000000000UL)
- regs->pll_prop_gain_rate = 10;
- else
- regs->pll_prop_gain_rate = 12;
- if (pll_freq < 1100000000UL)
- regs->pll_clock_inverters = 8;
- else
- regs->pll_clock_inverters = 0;
-
- regs->pll_lockdet_rate = config->lock_timer;
- regs->decimal_div_start = dec;
- regs->frac_div_start_low = (frac & 0xff);
- regs->frac_div_start_mid = (frac & 0xff00) >> 8;
- regs->frac_div_start_high = (frac & 0x30000) >> 16;
-}
-
-#define SSC_CENTER BIT(0)
-#define SSC_EN BIT(1)
-
-static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll)
-{
- struct dsi_pll_config *config = &pll->pll_configuration;
- struct dsi_pll_regs *regs = &pll->reg_setup;
- u32 ssc_per;
- u32 ssc_mod;
- u64 ssc_step_size;
- u64 frac;
-
- if (!config->enable_ssc) {
- DBG("SSC not enabled\n");
- return;
- }
-
- ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / 2 - 1;
- ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1);
- ssc_per -= ssc_mod;
-
- frac = regs->frac_div_start_low |
- (regs->frac_div_start_mid << 8) |
- (regs->frac_div_start_high << 16);
- ssc_step_size = regs->decimal_div_start;
- ssc_step_size *= (1 << config->frac_bits);
- ssc_step_size += frac;
- ssc_step_size *= config->ssc_offset;
- ssc_step_size *= (config->ssc_adj_per + 1);
- ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1));
- ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000);
-
- regs->ssc_div_per_low = ssc_per & 0xFF;
- regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8;
- regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF);
- regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8);
- regs->ssc_adjper_low = config->ssc_adj_per & 0xFF;
- regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8;
-
- regs->ssc_control = config->ssc_center ? SSC_CENTER : 0;
-
- pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n",
- regs->decimal_div_start, frac, config->frac_bits);
- pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n",
- ssc_per, (u32)ssc_step_size, config->ssc_adj_per);
-}
-
-static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll)
-{
- void __iomem *base = pll->mmio;
- struct dsi_pll_regs *regs = &pll->reg_setup;
-
- if (pll->pll_configuration.enable_ssc) {
- pr_debug("SSC is enabled\n");
-
- pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_LOW_1,
- regs->ssc_stepsize_low);
- pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_HIGH_1,
- regs->ssc_stepsize_high);
- pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_LOW_1,
- regs->ssc_div_per_low);
- pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_HIGH_1,
- regs->ssc_div_per_high);
- pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_LOW_1,
- regs->ssc_adjper_low);
- pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_HIGH_1,
- regs->ssc_adjper_high);
- pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_CONTROL,
- SSC_EN | regs->ssc_control);
- }
-}
-
-static void dsi_pll_config_hzindep_reg(struct dsi_pll_10nm *pll)
-{
- void __iomem *base = pll->mmio;
-
- pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_ONE, 0x80);
- pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_TWO, 0x03);
- pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_THREE, 0x00);
- pll_write(base + REG_DSI_10nm_PHY_PLL_DSM_DIVIDER, 0x00);
- pll_write(base + REG_DSI_10nm_PHY_PLL_FEEDBACK_DIVIDER, 0x4e);
- pll_write(base + REG_DSI_10nm_PHY_PLL_CALIBRATION_SETTINGS, 0x40);
- pll_write(base + REG_DSI_10nm_PHY_PLL_BAND_SEL_CAL_SETTINGS_THREE,
- 0xba);
- pll_write(base + REG_DSI_10nm_PHY_PLL_FREQ_DETECT_SETTINGS_ONE, 0x0c);
- pll_write(base + REG_DSI_10nm_PHY_PLL_OUTDIV, 0x00);
- pll_write(base + REG_DSI_10nm_PHY_PLL_CORE_OVERRIDE, 0x00);
- pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_DIGITAL_TIMERS_TWO, 0x08);
- pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_PROP_GAIN_RATE_1, 0x08);
- pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_BAND_SET_RATE_1, 0xc0);
- pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_INT_GAIN_IFILT_BAND_1, 0xfa);
- pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_FL_INT_GAIN_PFILT_BAND_1,
- 0x4c);
- pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCK_OVERRIDE, 0x80);
- pll_write(base + REG_DSI_10nm_PHY_PLL_PFILT, 0x29);
- pll_write(base + REG_DSI_10nm_PHY_PLL_IFILT, 0x3f);
-}
-
-static void dsi_pll_commit(struct dsi_pll_10nm *pll)
-{
- void __iomem *base = pll->mmio;
- struct dsi_pll_regs *reg = &pll->reg_setup;
-
- pll_write(base + REG_DSI_10nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12);
- pll_write(base + REG_DSI_10nm_PHY_PLL_DECIMAL_DIV_START_1,
- reg->decimal_div_start);
- pll_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_LOW_1,
- reg->frac_div_start_low);
- pll_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_MID_1,
- reg->frac_div_start_mid);
- pll_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1,
- reg->frac_div_start_high);
- pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1,
- reg->pll_lockdet_rate);
- pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCK_DELAY, 0x06);
- pll_write(base + REG_DSI_10nm_PHY_PLL_CMODE, 0x10);
- pll_write(base + REG_DSI_10nm_PHY_PLL_CLOCK_INVERTERS,
- reg->pll_clock_inverters);
-}
-
-static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
-
- DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_10nm->id, rate,
- parent_rate);
-
- pll_10nm->vco_current_rate = rate;
- pll_10nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;
-
- dsi_pll_setup_config(pll_10nm);
-
- dsi_pll_calc_dec_frac(pll_10nm);
-
- dsi_pll_calc_ssc(pll_10nm);
-
- dsi_pll_commit(pll_10nm);
-
- dsi_pll_config_hzindep_reg(pll_10nm);
-
- dsi_pll_ssc_commit(pll_10nm);
-
- /* flush, ensure all register writes are done*/
- wmb();
-
- return 0;
-}
-
-static int dsi_pll_10nm_lock_status(struct dsi_pll_10nm *pll)
-{
- struct device *dev = &pll->pdev->dev;
- int rc;
- u32 status = 0;
- u32 const delay_us = 100;
- u32 const timeout_us = 5000;
-
- rc = readl_poll_timeout_atomic(pll->mmio +
- REG_DSI_10nm_PHY_PLL_COMMON_STATUS_ONE,
- status,
- ((status & BIT(0)) > 0),
- delay_us,
- timeout_us);
- if (rc)
- DRM_DEV_ERROR(dev, "DSI PLL(%d) lock failed, status=0x%08x\n",
- pll->id, status);
-
- return rc;
-}
-
-static void dsi_pll_disable_pll_bias(struct dsi_pll_10nm *pll)
-{
- u32 data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0);
-
- pll_write(pll->mmio + REG_DSI_10nm_PHY_PLL_SYSTEM_MUXES, 0);
- pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0,
- data & ~BIT(5));
- ndelay(250);
-}
-
-static void dsi_pll_enable_pll_bias(struct dsi_pll_10nm *pll)
-{
- u32 data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0);
-
- pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0,
- data | BIT(5));
- pll_write(pll->mmio + REG_DSI_10nm_PHY_PLL_SYSTEM_MUXES, 0xc0);
- ndelay(250);
-}
-
-static void dsi_pll_disable_global_clk(struct dsi_pll_10nm *pll)
-{
- u32 data;
-
- data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1);
- pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1,
- data & ~BIT(5));
-}
-
-static void dsi_pll_enable_global_clk(struct dsi_pll_10nm *pll)
-{
- u32 data;
-
- data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1);
- pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1,
- data | BIT(5));
-}
-
-static int dsi_pll_10nm_vco_prepare(struct clk_hw *hw)
-{
- struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
- struct device *dev = &pll_10nm->pdev->dev;
- int rc;
-
- dsi_pll_enable_pll_bias(pll_10nm);
- if (pll_10nm->slave)
- dsi_pll_enable_pll_bias(pll_10nm->slave);
-
- rc = dsi_pll_10nm_vco_set_rate(hw,pll_10nm->vco_current_rate, 0);
- if (rc) {
- DRM_DEV_ERROR(dev, "vco_set_rate failed, rc=%d\n", rc);
- return rc;
- }
-
- /* Start PLL */
- pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_PLL_CNTRL,
- 0x01);
-
- /*
- * ensure all PLL configurations are written prior to checking
- * for PLL lock.
- */
- wmb();
-
- /* Check for PLL lock */
- rc = dsi_pll_10nm_lock_status(pll_10nm);
- if (rc) {
- DRM_DEV_ERROR(dev, "PLL(%d) lock failed\n", pll_10nm->id);
- goto error;
- }
-
- pll->pll_on = true;
-
- dsi_pll_enable_global_clk(pll_10nm);
- if (pll_10nm->slave)
- dsi_pll_enable_global_clk(pll_10nm->slave);
-
- pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_RBUF_CTRL,
- 0x01);
- if (pll_10nm->slave)
- pll_write(pll_10nm->slave->phy_cmn_mmio +
- REG_DSI_10nm_PHY_CMN_RBUF_CTRL, 0x01);
-
-error:
- return rc;
-}
-
-static void dsi_pll_disable_sub(struct dsi_pll_10nm *pll)
-{
- pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_RBUF_CTRL, 0);
- dsi_pll_disable_pll_bias(pll);
-}
-
-static void dsi_pll_10nm_vco_unprepare(struct clk_hw *hw)
-{
- struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
-
- /*
- * To avoid any stray glitches while abruptly powering down the PLL
- * make sure to gate the clock using the clock enable bit before
- * powering down the PLL
- */
- dsi_pll_disable_global_clk(pll_10nm);
- pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_PLL_CNTRL, 0);
- dsi_pll_disable_sub(pll_10nm);
- if (pll_10nm->slave) {
- dsi_pll_disable_global_clk(pll_10nm->slave);
- dsi_pll_disable_sub(pll_10nm->slave);
- }
- /* flush, ensure all register writes are done */
- wmb();
- pll->pll_on = false;
-}
-
-static unsigned long dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
- struct dsi_pll_config *config = &pll_10nm->pll_configuration;
- void __iomem *base = pll_10nm->mmio;
- u64 ref_clk = pll_10nm->vco_ref_clk_rate;
- u64 vco_rate = 0x0;
- u64 multiplier;
- u32 frac;
- u32 dec;
- u64 pll_freq, tmp64;
-
- dec = pll_read(base + REG_DSI_10nm_PHY_PLL_DECIMAL_DIV_START_1);
- dec &= 0xff;
-
- frac = pll_read(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_LOW_1);
- frac |= ((pll_read(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_MID_1) &
- 0xff) << 8);
- frac |= ((pll_read(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1) &
- 0x3) << 16);
-
- /*
- * TODO:
- * 1. Assumes prescaler is disabled
- */
- multiplier = 1 << config->frac_bits;
- pll_freq = dec * (ref_clk * 2);
- tmp64 = (ref_clk * 2 * frac);
- pll_freq += div_u64(tmp64, multiplier);
-
- vco_rate = pll_freq;
-
- DBG("DSI PLL%d returning vco rate = %lu, dec = %x, frac = %x",
- pll_10nm->id, (unsigned long)vco_rate, dec, frac);
-
- return (unsigned long)vco_rate;
-}
-
-static const struct clk_ops clk_ops_dsi_pll_10nm_vco = {
- .round_rate = msm_dsi_pll_helper_clk_round_rate,
- .set_rate = dsi_pll_10nm_vco_set_rate,
- .recalc_rate = dsi_pll_10nm_vco_recalc_rate,
- .prepare = dsi_pll_10nm_vco_prepare,
- .unprepare = dsi_pll_10nm_vco_unprepare,
-};
-
-/*
- * PLL Callbacks
- */
-
-static void dsi_pll_10nm_save_state(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
- struct pll_10nm_cached_state *cached = &pll_10nm->cached_state;
- void __iomem *phy_base = pll_10nm->phy_cmn_mmio;
- u32 cmn_clk_cfg0, cmn_clk_cfg1;
-
- cached->pll_out_div = pll_read(pll_10nm->mmio +
- REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE);
- cached->pll_out_div &= 0x3;
-
- cmn_clk_cfg0 = pll_read(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG0);
- cached->bit_clk_div = cmn_clk_cfg0 & 0xf;
- cached->pix_clk_div = (cmn_clk_cfg0 & 0xf0) >> 4;
-
- cmn_clk_cfg1 = pll_read(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1);
- cached->pll_mux = cmn_clk_cfg1 & 0x3;
-
- DBG("DSI PLL%d outdiv %x bit_clk_div %x pix_clk_div %x pll_mux %x",
- pll_10nm->id, cached->pll_out_div, cached->bit_clk_div,
- cached->pix_clk_div, cached->pll_mux);
-}
-
-static int dsi_pll_10nm_restore_state(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
- struct pll_10nm_cached_state *cached = &pll_10nm->cached_state;
- void __iomem *phy_base = pll_10nm->phy_cmn_mmio;
- u32 val;
- int ret;
-
- val = pll_read(pll_10nm->mmio + REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE);
- val &= ~0x3;
- val |= cached->pll_out_div;
- pll_write(pll_10nm->mmio + REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE, val);
-
- pll_write(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG0,
- cached->bit_clk_div | (cached->pix_clk_div << 4));
-
- val = pll_read(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1);
- val &= ~0x3;
- val |= cached->pll_mux;
- pll_write(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1, val);
-
- ret = dsi_pll_10nm_vco_set_rate(&pll->clk_hw, pll_10nm->vco_current_rate, pll_10nm->vco_ref_clk_rate);
- if (ret) {
- DRM_DEV_ERROR(&pll_10nm->pdev->dev,
- "restore vco rate failed. ret=%d\n", ret);
- return ret;
- }
-
- DBG("DSI PLL%d", pll_10nm->id);
-
- return 0;
-}
-
-static int dsi_pll_10nm_set_usecase(struct msm_dsi_pll *pll,
- enum msm_dsi_phy_usecase uc)
-{
- struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
- void __iomem *base = pll_10nm->phy_cmn_mmio;
- u32 data = 0x0; /* internal PLL */
-
- DBG("DSI PLL%d", pll_10nm->id);
-
- switch (uc) {
- case MSM_DSI_PHY_STANDALONE:
- break;
- case MSM_DSI_PHY_MASTER:
- pll_10nm->slave = pll_10nm_list[(pll_10nm->id + 1) % DSI_MAX];
- break;
- case MSM_DSI_PHY_SLAVE:
- data = 0x1; /* external PLL */
- break;
- default:
- return -EINVAL;
- }
-
- /* set PLL src */
- pll_write(base + REG_DSI_10nm_PHY_CMN_CLK_CFG1, (data << 2));
-
- pll_10nm->uc = uc;
-
- return 0;
-}
-
-static int dsi_pll_10nm_get_provider(struct msm_dsi_pll *pll,
- struct clk **byte_clk_provider,
- struct clk **pixel_clk_provider)
-{
- struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
- struct clk_hw_onecell_data *hw_data = pll_10nm->hw_data;
-
- DBG("DSI PLL%d", pll_10nm->id);
-
- if (byte_clk_provider)
- *byte_clk_provider = hw_data->hws[DSI_BYTE_PLL_CLK]->clk;
- if (pixel_clk_provider)
- *pixel_clk_provider = hw_data->hws[DSI_PIXEL_PLL_CLK]->clk;
-
- return 0;
-}
-
-static void dsi_pll_10nm_destroy(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
- struct device *dev = &pll_10nm->pdev->dev;
-
- DBG("DSI PLL%d", pll_10nm->id);
- of_clk_del_provider(dev->of_node);
-
- clk_hw_unregister_divider(pll_10nm->out_dsiclk_hw);
- clk_hw_unregister_mux(pll_10nm->pclk_mux_hw);
- clk_hw_unregister_fixed_factor(pll_10nm->post_out_div_clk_hw);
- clk_hw_unregister_fixed_factor(pll_10nm->by_2_bit_clk_hw);
- clk_hw_unregister_fixed_factor(pll_10nm->byte_clk_hw);
- clk_hw_unregister_divider(pll_10nm->bit_clk_hw);
- clk_hw_unregister_divider(pll_10nm->out_div_clk_hw);
- clk_hw_unregister(&pll_10nm->base.clk_hw);
-}
-
-/*
- * The post dividers and mux clocks are created using the standard divider and
- * mux API. Unlike the 14nm PHY, the slave PLL doesn't need its dividers/mux
- * state to follow the master PLL's divider/mux state. Therefore, we don't
- * require special clock ops that also configure the slave PLL registers
- */
-static int pll_10nm_register(struct dsi_pll_10nm *pll_10nm)
-{
- char clk_name[32], parent[32], vco_name[32];
- char parent2[32], parent3[32], parent4[32];
- struct clk_init_data vco_init = {
- .parent_names = (const char *[]){ "xo" },
- .num_parents = 1,
- .name = vco_name,
- .flags = CLK_IGNORE_UNUSED,
- .ops = &clk_ops_dsi_pll_10nm_vco,
- };
- struct device *dev = &pll_10nm->pdev->dev;
- struct clk_hw_onecell_data *hw_data;
- struct clk_hw *hw;
- int ret;
-
- DBG("DSI%d", pll_10nm->id);
-
- hw_data = devm_kzalloc(dev, sizeof(*hw_data) +
- NUM_PROVIDED_CLKS * sizeof(struct clk_hw *),
- GFP_KERNEL);
- if (!hw_data)
- return -ENOMEM;
-
- snprintf(vco_name, 32, "dsi%dvco_clk", pll_10nm->id);
- pll_10nm->base.clk_hw.init = &vco_init;
-
- ret = clk_hw_register(dev, &pll_10nm->base.clk_hw);
- if (ret)
- return ret;
-
- snprintf(clk_name, 32, "dsi%d_pll_out_div_clk", pll_10nm->id);
- snprintf(parent, 32, "dsi%dvco_clk", pll_10nm->id);
-
- hw = clk_hw_register_divider(dev, clk_name,
- parent, CLK_SET_RATE_PARENT,
- pll_10nm->mmio +
- REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE,
- 0, 2, CLK_DIVIDER_POWER_OF_TWO, NULL);
- if (IS_ERR(hw)) {
- ret = PTR_ERR(hw);
- goto err_base_clk_hw;
- }
-
- pll_10nm->out_div_clk_hw = hw;
-
- snprintf(clk_name, 32, "dsi%d_pll_bit_clk", pll_10nm->id);
- snprintf(parent, 32, "dsi%d_pll_out_div_clk", pll_10nm->id);
-
- /* BIT CLK: DIV_CTRL_3_0 */
- hw = clk_hw_register_divider(dev, clk_name, parent,
- CLK_SET_RATE_PARENT,
- pll_10nm->phy_cmn_mmio +
- REG_DSI_10nm_PHY_CMN_CLK_CFG0,
- 0, 4, CLK_DIVIDER_ONE_BASED,
- &pll_10nm->postdiv_lock);
- if (IS_ERR(hw)) {
- ret = PTR_ERR(hw);
- goto err_out_div_clk_hw;
- }
-
- pll_10nm->bit_clk_hw = hw;
-
- snprintf(clk_name, 32, "dsi%d_phy_pll_out_byteclk", pll_10nm->id);
- snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_10nm->id);
-
- /* DSI Byte clock = VCO_CLK / OUT_DIV / BIT_DIV / 8 */
- hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
- CLK_SET_RATE_PARENT, 1, 8);
- if (IS_ERR(hw)) {
- ret = PTR_ERR(hw);
- goto err_bit_clk_hw;
- }
-
- pll_10nm->byte_clk_hw = hw;
- hw_data->hws[DSI_BYTE_PLL_CLK] = hw;
-
- snprintf(clk_name, 32, "dsi%d_pll_by_2_bit_clk", pll_10nm->id);
- snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_10nm->id);
-
- hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
- 0, 1, 2);
- if (IS_ERR(hw)) {
- ret = PTR_ERR(hw);
- goto err_byte_clk_hw;
- }
-
- pll_10nm->by_2_bit_clk_hw = hw;
-
- snprintf(clk_name, 32, "dsi%d_pll_post_out_div_clk", pll_10nm->id);
- snprintf(parent, 32, "dsi%d_pll_out_div_clk", pll_10nm->id);
-
- hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
- 0, 1, 4);
- if (IS_ERR(hw)) {
- ret = PTR_ERR(hw);
- goto err_by_2_bit_clk_hw;
- }
-
- pll_10nm->post_out_div_clk_hw = hw;
-
- snprintf(clk_name, 32, "dsi%d_pclk_mux", pll_10nm->id);
- snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_10nm->id);
- snprintf(parent2, 32, "dsi%d_pll_by_2_bit_clk", pll_10nm->id);
- snprintf(parent3, 32, "dsi%d_pll_out_div_clk", pll_10nm->id);
- snprintf(parent4, 32, "dsi%d_pll_post_out_div_clk", pll_10nm->id);
-
- hw = clk_hw_register_mux(dev, clk_name,
- ((const char *[]){
- parent, parent2, parent3, parent4
- }), 4, 0, pll_10nm->phy_cmn_mmio +
- REG_DSI_10nm_PHY_CMN_CLK_CFG1,
- 0, 2, 0, NULL);
- if (IS_ERR(hw)) {
- ret = PTR_ERR(hw);
- goto err_post_out_div_clk_hw;
- }
-
- pll_10nm->pclk_mux_hw = hw;
-
- snprintf(clk_name, 32, "dsi%d_phy_pll_out_dsiclk", pll_10nm->id);
- snprintf(parent, 32, "dsi%d_pclk_mux", pll_10nm->id);
-
- /* PIX CLK DIV : DIV_CTRL_7_4*/
- hw = clk_hw_register_divider(dev, clk_name, parent,
- 0, pll_10nm->phy_cmn_mmio +
- REG_DSI_10nm_PHY_CMN_CLK_CFG0,
- 4, 4, CLK_DIVIDER_ONE_BASED,
- &pll_10nm->postdiv_lock);
- if (IS_ERR(hw)) {
- ret = PTR_ERR(hw);
- goto err_pclk_mux_hw;
- }
-
- pll_10nm->out_dsiclk_hw = hw;
- hw_data->hws[DSI_PIXEL_PLL_CLK] = hw;
-
- hw_data->num = NUM_PROVIDED_CLKS;
- pll_10nm->hw_data = hw_data;
-
- ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
- pll_10nm->hw_data);
- if (ret) {
- DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret);
- goto err_dsiclk_hw;
- }
-
- return 0;
-
-err_dsiclk_hw:
- clk_hw_unregister_divider(pll_10nm->out_dsiclk_hw);
-err_pclk_mux_hw:
- clk_hw_unregister_mux(pll_10nm->pclk_mux_hw);
-err_post_out_div_clk_hw:
- clk_hw_unregister_fixed_factor(pll_10nm->post_out_div_clk_hw);
-err_by_2_bit_clk_hw:
- clk_hw_unregister_fixed_factor(pll_10nm->by_2_bit_clk_hw);
-err_byte_clk_hw:
- clk_hw_unregister_fixed_factor(pll_10nm->byte_clk_hw);
-err_bit_clk_hw:
- clk_hw_unregister_divider(pll_10nm->bit_clk_hw);
-err_out_div_clk_hw:
- clk_hw_unregister_divider(pll_10nm->out_div_clk_hw);
-err_base_clk_hw:
- clk_hw_unregister(&pll_10nm->base.clk_hw);
-
- return ret;
-}
-
-struct msm_dsi_pll *msm_dsi_pll_10nm_init(struct platform_device *pdev, int id)
-{
- struct dsi_pll_10nm *pll_10nm;
- struct msm_dsi_pll *pll;
- int ret;
-
- pll_10nm = devm_kzalloc(&pdev->dev, sizeof(*pll_10nm), GFP_KERNEL);
- if (!pll_10nm)
- return ERR_PTR(-ENOMEM);
-
- DBG("DSI PLL%d", id);
-
- pll_10nm->pdev = pdev;
- pll_10nm->id = id;
- pll_10nm_list[id] = pll_10nm;
-
- pll_10nm->phy_cmn_mmio = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
- if (IS_ERR_OR_NULL(pll_10nm->phy_cmn_mmio)) {
- DRM_DEV_ERROR(&pdev->dev, "failed to map CMN PHY base\n");
- return ERR_PTR(-ENOMEM);
- }
-
- pll_10nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL");
- if (IS_ERR_OR_NULL(pll_10nm->mmio)) {
- DRM_DEV_ERROR(&pdev->dev, "failed to map PLL base\n");
- return ERR_PTR(-ENOMEM);
- }
-
- spin_lock_init(&pll_10nm->postdiv_lock);
-
- pll = &pll_10nm->base;
- pll->min_rate = 1000000000UL;
- pll->max_rate = 3500000000UL;
- pll->get_provider = dsi_pll_10nm_get_provider;
- pll->destroy = dsi_pll_10nm_destroy;
- pll->save_state = dsi_pll_10nm_save_state;
- pll->restore_state = dsi_pll_10nm_restore_state;
- pll->set_usecase = dsi_pll_10nm_set_usecase;
-
- pll_10nm->vco_delay = 1;
-
- ret = pll_10nm_register(pll_10nm);
- if (ret) {
- DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
- return ERR_PTR(ret);
- }
-
- /* TODO: Remove this when we have proper display handover support */
- msm_dsi_pll_save_state(pll);
-
- return pll;
-}
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c
deleted file mode 100644
index f847376d501e..000000000000
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c
+++ /dev/null
@@ -1,1096 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- */
-
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-
-#include "dsi_pll.h"
-#include "dsi.xml.h"
-
-/*
- * DSI PLL 14nm - clock diagram (eg: DSI0):
- *
- * dsi0n1_postdiv_clk
- * |
- * |
- * +----+ | +----+
- * dsi0vco_clk ---| n1 |--o--| /8 |-- dsi0pllbyte
- * +----+ | +----+
- * | dsi0n1_postdivby2_clk
- * | +----+ |
- * o---| /2 |--o--|\
- * | +----+ | \ +----+
- * | | |--| n2 |-- dsi0pll
- * o--------------| / +----+
- * |/
- */
-
-#define POLL_MAX_READS 15
-#define POLL_TIMEOUT_US 1000
-
-#define NUM_PROVIDED_CLKS 2
-
-#define VCO_REF_CLK_RATE 19200000
-#define VCO_MIN_RATE 1300000000UL
-#define VCO_MAX_RATE 2600000000UL
-
-#define DSI_BYTE_PLL_CLK 0
-#define DSI_PIXEL_PLL_CLK 1
-
-#define DSI_PLL_DEFAULT_VCO_POSTDIV 1
-
-struct dsi_pll_input {
- u32 fref; /* reference clk */
- u32 fdata; /* bit clock rate */
- u32 dsiclk_sel; /* Mux configuration (see diagram) */
- u32 ssc_en; /* SSC enable/disable */
- u32 ldo_en;
-
- /* fixed params */
- u32 refclk_dbler_en;
- u32 vco_measure_time;
- u32 kvco_measure_time;
- u32 bandgap_timer;
- u32 pll_wakeup_timer;
- u32 plllock_cnt;
- u32 plllock_rng;
- u32 ssc_center;
- u32 ssc_adj_period;
- u32 ssc_spread;
- u32 ssc_freq;
- u32 pll_ie_trim;
- u32 pll_ip_trim;
- u32 pll_iptat_trim;
- u32 pll_cpcset_cur;
- u32 pll_cpmset_cur;
-
- u32 pll_icpmset;
- u32 pll_icpcset;
-
- u32 pll_icpmset_p;
- u32 pll_icpmset_m;
-
- u32 pll_icpcset_p;
- u32 pll_icpcset_m;
-
- u32 pll_lpf_res1;
- u32 pll_lpf_cap1;
- u32 pll_lpf_cap2;
- u32 pll_c3ctrl;
- u32 pll_r3ctrl;
-};
-
-struct dsi_pll_output {
- u32 pll_txclk_en;
- u32 dec_start;
- u32 div_frac_start;
- u32 ssc_period;
- u32 ssc_step_size;
- u32 plllock_cmp;
- u32 pll_vco_div_ref;
- u32 pll_vco_count;
- u32 pll_kvco_div_ref;
- u32 pll_kvco_count;
- u32 pll_misc1;
- u32 pll_lpf2_postdiv;
- u32 pll_resetsm_cntrl;
- u32 pll_resetsm_cntrl2;
- u32 pll_resetsm_cntrl5;
- u32 pll_kvco_code;
-
- u32 cmn_clk_cfg0;
- u32 cmn_clk_cfg1;
- u32 cmn_ldo_cntrl;
-
- u32 pll_postdiv;
- u32 fcvo;
-};
-
-struct pll_14nm_cached_state {
- unsigned long vco_rate;
- u8 n2postdiv;
- u8 n1postdiv;
-};
-
-struct dsi_pll_14nm {
- struct msm_dsi_pll base;
-
- int id;
- struct platform_device *pdev;
-
- void __iomem *phy_cmn_mmio;
- void __iomem *mmio;
-
- int vco_delay;
-
- struct dsi_pll_input in;
- struct dsi_pll_output out;
-
- /* protects REG_DSI_14nm_PHY_CMN_CLK_CFG0 register */
- spinlock_t postdiv_lock;
-
- u64 vco_current_rate;
- u64 vco_ref_clk_rate;
-
- /* private clocks: */
- struct clk_hw *hws[NUM_DSI_CLOCKS_MAX];
- u32 num_hws;
-
- /* clock-provider: */
- struct clk_hw_onecell_data *hw_data;
-
- struct pll_14nm_cached_state cached_state;
-
- enum msm_dsi_phy_usecase uc;
- struct dsi_pll_14nm *slave;
-};
-
-#define to_pll_14nm(x) container_of(x, struct dsi_pll_14nm, base)
-
-/*
- * Private struct for N1/N2 post-divider clocks. These clocks are similar to
- * the generic clk_divider class of clocks. The only difference is that it
- * also sets the slave DSI PLL's post-dividers if in Dual DSI mode
- */
-struct dsi_pll_14nm_postdiv {
- struct clk_hw hw;
-
- /* divider params */
- u8 shift;
- u8 width;
- u8 flags; /* same flags as used by clk_divider struct */
-
- struct dsi_pll_14nm *pll;
-};
-
-#define to_pll_14nm_postdiv(_hw) container_of(_hw, struct dsi_pll_14nm_postdiv, hw)
-
-/*
- * Global list of private DSI PLL struct pointers. We need this for Dual DSI
- * mode, where the master PLL's clk_ops needs access the slave's private data
- */
-static struct dsi_pll_14nm *pll_14nm_list[DSI_MAX];
-
-static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm,
- u32 nb_tries, u32 timeout_us)
-{
- bool pll_locked = false;
- void __iomem *base = pll_14nm->mmio;
- u32 tries, val;
-
- tries = nb_tries;
- while (tries--) {
- val = pll_read(base +
- REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS);
- pll_locked = !!(val & BIT(5));
-
- if (pll_locked)
- break;
-
- udelay(timeout_us);
- }
-
- if (!pll_locked) {
- tries = nb_tries;
- while (tries--) {
- val = pll_read(base +
- REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS);
- pll_locked = !!(val & BIT(0));
-
- if (pll_locked)
- break;
-
- udelay(timeout_us);
- }
- }
-
- DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* ");
-
- return pll_locked;
-}
-
-static void dsi_pll_14nm_input_init(struct dsi_pll_14nm *pll)
-{
- pll->in.fref = pll->vco_ref_clk_rate;
- pll->in.fdata = 0;
- pll->in.dsiclk_sel = 1; /* Use the /2 path in Mux */
- pll->in.ldo_en = 0; /* disabled for now */
-
- /* fixed input */
- pll->in.refclk_dbler_en = 0;
- pll->in.vco_measure_time = 5;
- pll->in.kvco_measure_time = 5;
- pll->in.bandgap_timer = 4;
- pll->in.pll_wakeup_timer = 5;
- pll->in.plllock_cnt = 1;
- pll->in.plllock_rng = 0;
-
- /*
- * SSC is enabled by default. We might need DT props for configuring
- * some SSC params like PPM and center/down spread etc.
- */
- pll->in.ssc_en = 1;
- pll->in.ssc_center = 0; /* down spread by default */
- pll->in.ssc_spread = 5; /* PPM / 1000 */
- pll->in.ssc_freq = 31500; /* default recommended */
- pll->in.ssc_adj_period = 37;
-
- pll->in.pll_ie_trim = 4;
- pll->in.pll_ip_trim = 4;
- pll->in.pll_cpcset_cur = 1;
- pll->in.pll_cpmset_cur = 1;
- pll->in.pll_icpmset = 4;
- pll->in.pll_icpcset = 4;
- pll->in.pll_icpmset_p = 0;
- pll->in.pll_icpmset_m = 0;
- pll->in.pll_icpcset_p = 0;
- pll->in.pll_icpcset_m = 0;
- pll->in.pll_lpf_res1 = 3;
- pll->in.pll_lpf_cap1 = 11;
- pll->in.pll_lpf_cap2 = 1;
- pll->in.pll_iptat_trim = 7;
- pll->in.pll_c3ctrl = 2;
- pll->in.pll_r3ctrl = 1;
-}
-
-#define CEIL(x, y) (((x) + ((y) - 1)) / (y))
-
-static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll)
-{
- u32 period, ssc_period;
- u32 ref, rem;
- u64 step_size;
-
- DBG("vco=%lld ref=%lld", pll->vco_current_rate, pll->vco_ref_clk_rate);
-
- ssc_period = pll->in.ssc_freq / 500;
- period = (u32)pll->vco_ref_clk_rate / 1000;
- ssc_period = CEIL(period, ssc_period);
- ssc_period -= 1;
- pll->out.ssc_period = ssc_period;
-
- DBG("ssc freq=%d spread=%d period=%d", pll->in.ssc_freq,
- pll->in.ssc_spread, pll->out.ssc_period);
-
- step_size = (u32)pll->vco_current_rate;
- ref = pll->vco_ref_clk_rate;
- ref /= 1000;
- step_size = div_u64(step_size, ref);
- step_size <<= 20;
- step_size = div_u64(step_size, 1000);
- step_size *= pll->in.ssc_spread;
- step_size = div_u64(step_size, 1000);
- step_size *= (pll->in.ssc_adj_period + 1);
-
- rem = 0;
- step_size = div_u64_rem(step_size, ssc_period + 1, &rem);
- if (rem)
- step_size++;
-
- DBG("step_size=%lld", step_size);
-
- step_size &= 0x0ffff; /* take lower 16 bits */
-
- pll->out.ssc_step_size = step_size;
-}
-
-static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll)
-{
- struct dsi_pll_input *pin = &pll->in;
- struct dsi_pll_output *pout = &pll->out;
- u64 multiplier = BIT(20);
- u64 dec_start_multiple, dec_start, pll_comp_val;
- u32 duration, div_frac_start;
- u64 vco_clk_rate = pll->vco_current_rate;
- u64 fref = pll->vco_ref_clk_rate;
-
- DBG("vco_clk_rate=%lld ref_clk_rate=%lld", vco_clk_rate, fref);
-
- dec_start_multiple = div_u64(vco_clk_rate * multiplier, fref);
- div_u64_rem(dec_start_multiple, multiplier, &div_frac_start);
-
- dec_start = div_u64(dec_start_multiple, multiplier);
-
- pout->dec_start = (u32)dec_start;
- pout->div_frac_start = div_frac_start;
-
- if (pin->plllock_cnt == 0)
- duration = 1024;
- else if (pin->plllock_cnt == 1)
- duration = 256;
- else if (pin->plllock_cnt == 2)
- duration = 128;
- else
- duration = 32;
-
- pll_comp_val = duration * dec_start_multiple;
- pll_comp_val = div_u64(pll_comp_val, multiplier);
- do_div(pll_comp_val, 10);
-
- pout->plllock_cmp = (u32)pll_comp_val;
-
- pout->pll_txclk_en = 1;
- pout->cmn_ldo_cntrl = 0x3c;
-}
-
-static u32 pll_14nm_kvco_slop(u32 vrate)
-{
- u32 slop = 0;
-
- if (vrate > VCO_MIN_RATE && vrate <= 1800000000UL)
- slop = 600;
- else if (vrate > 1800000000UL && vrate < 2300000000UL)
- slop = 400;
- else if (vrate > 2300000000UL && vrate < VCO_MAX_RATE)
- slop = 280;
-
- return slop;
-}
-
-static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll)
-{
- struct dsi_pll_input *pin = &pll->in;
- struct dsi_pll_output *pout = &pll->out;
- u64 vco_clk_rate = pll->vco_current_rate;
- u64 fref = pll->vco_ref_clk_rate;
- u64 data;
- u32 cnt;
-
- data = fref * pin->vco_measure_time;
- do_div(data, 1000000);
- data &= 0x03ff; /* 10 bits */
- data -= 2;
- pout->pll_vco_div_ref = data;
-
- data = div_u64(vco_clk_rate, 1000000); /* unit is Mhz */
- data *= pin->vco_measure_time;
- do_div(data, 10);
- pout->pll_vco_count = data;
-
- data = fref * pin->kvco_measure_time;
- do_div(data, 1000000);
- data &= 0x03ff; /* 10 bits */
- data -= 1;
- pout->pll_kvco_div_ref = data;
-
- cnt = pll_14nm_kvco_slop(vco_clk_rate);
- cnt *= 2;
- cnt /= 100;
- cnt *= pin->kvco_measure_time;
- pout->pll_kvco_count = cnt;
-
- pout->pll_misc1 = 16;
- pout->pll_resetsm_cntrl = 48;
- pout->pll_resetsm_cntrl2 = pin->bandgap_timer << 3;
- pout->pll_resetsm_cntrl5 = pin->pll_wakeup_timer;
- pout->pll_kvco_code = 0;
-}
-
-static void pll_db_commit_ssc(struct dsi_pll_14nm *pll)
-{
- void __iomem *base = pll->mmio;
- struct dsi_pll_input *pin = &pll->in;
- struct dsi_pll_output *pout = &pll->out;
- u8 data;
-
- data = pin->ssc_adj_period;
- data &= 0x0ff;
- pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER1, data);
- data = (pin->ssc_adj_period >> 8);
- data &= 0x03;
- pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER2, data);
-
- data = pout->ssc_period;
- data &= 0x0ff;
- pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER1, data);
- data = (pout->ssc_period >> 8);
- data &= 0x0ff;
- pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER2, data);
-
- data = pout->ssc_step_size;
- data &= 0x0ff;
- pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE1, data);
- data = (pout->ssc_step_size >> 8);
- data &= 0x0ff;
- pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE2, data);
-
- data = (pin->ssc_center & 0x01);
- data <<= 1;
- data |= 0x01; /* enable */
- pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_EN_CENTER, data);
-
- wmb(); /* make sure register committed */
-}
-
-static void pll_db_commit_common(struct dsi_pll_14nm *pll,
- struct dsi_pll_input *pin,
- struct dsi_pll_output *pout)
-{
- void __iomem *base = pll->mmio;
- u8 data;
-
- /* confgiure the non frequency dependent pll registers */
- data = 0;
- pll_write(base + REG_DSI_14nm_PHY_PLL_SYSCLK_EN_RESET, data);
-
- data = pout->pll_txclk_en;
- pll_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, data);
-
- data = pout->pll_resetsm_cntrl;
- pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, data);
- data = pout->pll_resetsm_cntrl2;
- pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, data);
- data = pout->pll_resetsm_cntrl5;
- pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, data);
-
- data = pout->pll_vco_div_ref & 0xff;
- pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF1, data);
- data = (pout->pll_vco_div_ref >> 8) & 0x3;
- pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF2, data);
-
- data = pout->pll_kvco_div_ref & 0xff;
- pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF1, data);
- data = (pout->pll_kvco_div_ref >> 8) & 0x3;
- pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF2, data);
-
- data = pout->pll_misc1;
- pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, data);
-
- data = pin->pll_ie_trim;
- pll_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, data);
-
- data = pin->pll_ip_trim;
- pll_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, data);
-
- data = pin->pll_cpmset_cur << 3 | pin->pll_cpcset_cur;
- pll_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, data);
-
- data = pin->pll_icpcset_p << 3 | pin->pll_icpcset_m;
- pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, data);
-
- data = pin->pll_icpmset_p << 3 | pin->pll_icpcset_m;
- pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, data);
-
- data = pin->pll_icpmset << 3 | pin->pll_icpcset;
- pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, data);
-
- data = pin->pll_lpf_cap2 << 4 | pin->pll_lpf_cap1;
- pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, data);
-
- data = pin->pll_iptat_trim;
- pll_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, data);
-
- data = pin->pll_c3ctrl | pin->pll_r3ctrl << 4;
- pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, data);
-}
-
-static void pll_14nm_software_reset(struct dsi_pll_14nm *pll_14nm)
-{
- void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
-
- /* de assert pll start and apply pll sw reset */
-
- /* stop pll */
- pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 0);
-
- /* pll sw reset */
- pll_write_udelay(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_1, 0x20, 10);
- wmb(); /* make sure register committed */
-
- pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_1, 0);
- wmb(); /* make sure register committed */
-}
-
-static void pll_db_commit_14nm(struct dsi_pll_14nm *pll,
- struct dsi_pll_input *pin,
- struct dsi_pll_output *pout)
-{
- void __iomem *base = pll->mmio;
- void __iomem *cmn_base = pll->phy_cmn_mmio;
- u8 data;
-
- DBG("DSI%d PLL", pll->id);
-
- data = pout->cmn_ldo_cntrl;
- pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, data);
-
- pll_db_commit_common(pll, pin, pout);
-
- pll_14nm_software_reset(pll);
-
- data = pin->dsiclk_sel; /* set dsiclk_sel = 1 */
- pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, data);
-
- data = 0xff; /* data, clk, pll normal operation */
- pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_0, data);
-
- /* configure the frequency dependent pll registers */
- data = pout->dec_start;
- pll_write(base + REG_DSI_14nm_PHY_PLL_DEC_START, data);
-
- data = pout->div_frac_start & 0xff;
- pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1, data);
- data = (pout->div_frac_start >> 8) & 0xff;
- pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2, data);
- data = (pout->div_frac_start >> 16) & 0xf;
- pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3, data);
-
- data = pout->plllock_cmp & 0xff;
- pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP1, data);
-
- data = (pout->plllock_cmp >> 8) & 0xff;
- pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP2, data);
-
- data = (pout->plllock_cmp >> 16) & 0x3;
- pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP3, data);
-
- data = pin->plllock_cnt << 1 | pin->plllock_rng << 3;
- pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP_EN, data);
-
- data = pout->pll_vco_count & 0xff;
- pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT1, data);
- data = (pout->pll_vco_count >> 8) & 0xff;
- pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT2, data);
-
- data = pout->pll_kvco_count & 0xff;
- pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT1, data);
- data = (pout->pll_kvco_count >> 8) & 0x3;
- pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT2, data);
-
- data = (pout->pll_postdiv - 1) << 4 | pin->pll_lpf_res1;
- pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, data);
-
- if (pin->ssc_en)
- pll_db_commit_ssc(pll);
-
- wmb(); /* make sure register committed */
-}
-
-/*
- * VCO clock Callbacks
- */
-static int dsi_pll_14nm_vco_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
- struct dsi_pll_input *pin = &pll_14nm->in;
- struct dsi_pll_output *pout = &pll_14nm->out;
-
- DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_14nm->id, rate,
- parent_rate);
-
- pll_14nm->vco_current_rate = rate;
- pll_14nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;
-
- dsi_pll_14nm_input_init(pll_14nm);
-
- /*
- * This configures the post divider internal to the VCO. It's
- * fixed to divide by 1 for now.
- *
- * tx_band = pll_postdiv.
- * 0: divided by 1
- * 1: divided by 2
- * 2: divided by 4
- * 3: divided by 8
- */
- pout->pll_postdiv = DSI_PLL_DEFAULT_VCO_POSTDIV;
-
- pll_14nm_dec_frac_calc(pll_14nm);
-
- if (pin->ssc_en)
- pll_14nm_ssc_calc(pll_14nm);
-
- pll_14nm_calc_vco_count(pll_14nm);
-
- /* commit the slave DSI PLL registers if we're master. Note that we
- * don't lock the slave PLL. We just ensure that the PLL/PHY registers
- * of the master and slave are identical
- */
- if (pll_14nm->uc == MSM_DSI_PHY_MASTER) {
- struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
-
- pll_db_commit_14nm(pll_14nm_slave, pin, pout);
- }
-
- pll_db_commit_14nm(pll_14nm, pin, pout);
-
- return 0;
-}
-
-static unsigned long dsi_pll_14nm_vco_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
- void __iomem *base = pll_14nm->mmio;
- u64 vco_rate, multiplier = BIT(20);
- u32 div_frac_start;
- u32 dec_start;
- u64 ref_clk = parent_rate;
-
- dec_start = pll_read(base + REG_DSI_14nm_PHY_PLL_DEC_START);
- dec_start &= 0x0ff;
-
- DBG("dec_start = %x", dec_start);
-
- div_frac_start = (pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3)
- & 0xf) << 16;
- div_frac_start |= (pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2)
- & 0xff) << 8;
- div_frac_start |= pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1)
- & 0xff;
-
- DBG("div_frac_start = %x", div_frac_start);
-
- vco_rate = ref_clk * dec_start;
-
- vco_rate += ((ref_clk * div_frac_start) / multiplier);
-
- /*
- * Recalculating the rate from dec_start and frac_start doesn't end up
- * the rate we originally set. Convert the freq to KHz, round it up and
- * convert it back to MHz.
- */
- vco_rate = DIV_ROUND_UP_ULL(vco_rate, 1000) * 1000;
-
- DBG("returning vco rate = %lu", (unsigned long)vco_rate);
-
- return (unsigned long)vco_rate;
-}
-
-static const struct clk_ops clk_ops_dsi_pll_14nm_vco = {
- .round_rate = msm_dsi_pll_helper_clk_round_rate,
- .set_rate = dsi_pll_14nm_vco_set_rate,
- .recalc_rate = dsi_pll_14nm_vco_recalc_rate,
- .prepare = msm_dsi_pll_helper_clk_prepare,
- .unprepare = msm_dsi_pll_helper_clk_unprepare,
-};
-
-/*
- * N1 and N2 post-divider clock callbacks
- */
-#define div_mask(width) ((1 << (width)) - 1)
-static unsigned long dsi_pll_14nm_postdiv_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw);
- struct dsi_pll_14nm *pll_14nm = postdiv->pll;
- void __iomem *base = pll_14nm->phy_cmn_mmio;
- u8 shift = postdiv->shift;
- u8 width = postdiv->width;
- u32 val;
-
- DBG("DSI%d PLL parent rate=%lu", pll_14nm->id, parent_rate);
-
- val = pll_read(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0) >> shift;
- val &= div_mask(width);
-
- return divider_recalc_rate(hw, parent_rate, val, NULL,
- postdiv->flags, width);
-}
-
-static long dsi_pll_14nm_postdiv_round_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long *prate)
-{
- struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw);
- struct dsi_pll_14nm *pll_14nm = postdiv->pll;
-
- DBG("DSI%d PLL parent rate=%lu", pll_14nm->id, rate);
-
- return divider_round_rate(hw, rate, prate, NULL,
- postdiv->width,
- postdiv->flags);
-}
-
-static int dsi_pll_14nm_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw);
- struct dsi_pll_14nm *pll_14nm = postdiv->pll;
- void __iomem *base = pll_14nm->phy_cmn_mmio;
- spinlock_t *lock = &pll_14nm->postdiv_lock;
- u8 shift = postdiv->shift;
- u8 width = postdiv->width;
- unsigned int value;
- unsigned long flags = 0;
- u32 val;
-
- DBG("DSI%d PLL parent rate=%lu parent rate %lu", pll_14nm->id, rate,
- parent_rate);
-
- value = divider_get_val(rate, parent_rate, NULL, postdiv->width,
- postdiv->flags);
-
- spin_lock_irqsave(lock, flags);
-
- val = pll_read(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0);
- val &= ~(div_mask(width) << shift);
-
- val |= value << shift;
- pll_write(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, val);
-
- /* If we're master in dual DSI mode, then the slave PLL's post-dividers
- * follow the master's post dividers
- */
- if (pll_14nm->uc == MSM_DSI_PHY_MASTER) {
- struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
- void __iomem *slave_base = pll_14nm_slave->phy_cmn_mmio;
-
- pll_write(slave_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, val);
- }
-
- spin_unlock_irqrestore(lock, flags);
-
- return 0;
-}
-
-static const struct clk_ops clk_ops_dsi_pll_14nm_postdiv = {
- .recalc_rate = dsi_pll_14nm_postdiv_recalc_rate,
- .round_rate = dsi_pll_14nm_postdiv_round_rate,
- .set_rate = dsi_pll_14nm_postdiv_set_rate,
-};
-
-/*
- * PLL Callbacks
- */
-
-static int dsi_pll_14nm_enable_seq(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
- void __iomem *base = pll_14nm->mmio;
- void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
- bool locked;
-
- DBG("");
-
- pll_write(base + REG_DSI_14nm_PHY_PLL_VREF_CFG1, 0x10);
- pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 1);
-
- locked = pll_14nm_poll_for_ready(pll_14nm, POLL_MAX_READS,
- POLL_TIMEOUT_US);
-
- if (unlikely(!locked))
- DRM_DEV_ERROR(&pll_14nm->pdev->dev, "DSI PLL lock failed\n");
- else
- DBG("DSI PLL lock success");
-
- return locked ? 0 : -EINVAL;
-}
-
-static void dsi_pll_14nm_disable_seq(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
- void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
-
- DBG("");
-
- pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 0);
-}
-
-static void dsi_pll_14nm_save_state(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
- struct pll_14nm_cached_state *cached_state = &pll_14nm->cached_state;
- void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
- u32 data;
-
- data = pll_read(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0);
-
- cached_state->n1postdiv = data & 0xf;
- cached_state->n2postdiv = (data >> 4) & 0xf;
-
- DBG("DSI%d PLL save state %x %x", pll_14nm->id,
- cached_state->n1postdiv, cached_state->n2postdiv);
-
- cached_state->vco_rate = clk_hw_get_rate(&pll->clk_hw);
-}
-
-static int dsi_pll_14nm_restore_state(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
- struct pll_14nm_cached_state *cached_state = &pll_14nm->cached_state;
- void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
- u32 data;
- int ret;
-
- ret = dsi_pll_14nm_vco_set_rate(&pll->clk_hw,
- cached_state->vco_rate, 0);
- if (ret) {
- DRM_DEV_ERROR(&pll_14nm->pdev->dev,
- "restore vco rate failed. ret=%d\n", ret);
- return ret;
- }
-
- data = cached_state->n1postdiv | (cached_state->n2postdiv << 4);
-
- DBG("DSI%d PLL restore state %x %x", pll_14nm->id,
- cached_state->n1postdiv, cached_state->n2postdiv);
-
- pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, data);
-
- /* also restore post-dividers for slave DSI PLL */
- if (pll_14nm->uc == MSM_DSI_PHY_MASTER) {
- struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
- void __iomem *slave_base = pll_14nm_slave->phy_cmn_mmio;
-
- pll_write(slave_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, data);
- }
-
- return 0;
-}
-
-static int dsi_pll_14nm_set_usecase(struct msm_dsi_pll *pll,
- enum msm_dsi_phy_usecase uc)
-{
- struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
- void __iomem *base = pll_14nm->mmio;
- u32 clkbuflr_en, bandgap = 0;
-
- switch (uc) {
- case MSM_DSI_PHY_STANDALONE:
- clkbuflr_en = 0x1;
- break;
- case MSM_DSI_PHY_MASTER:
- clkbuflr_en = 0x3;
- pll_14nm->slave = pll_14nm_list[(pll_14nm->id + 1) % DSI_MAX];
- break;
- case MSM_DSI_PHY_SLAVE:
- clkbuflr_en = 0x0;
- bandgap = 0x3;
- break;
- default:
- return -EINVAL;
- }
-
- pll_write(base + REG_DSI_14nm_PHY_PLL_CLKBUFLR_EN, clkbuflr_en);
- if (bandgap)
- pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_BANDGAP, bandgap);
-
- pll_14nm->uc = uc;
-
- return 0;
-}
-
-static int dsi_pll_14nm_get_provider(struct msm_dsi_pll *pll,
- struct clk **byte_clk_provider,
- struct clk **pixel_clk_provider)
-{
- struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
- struct clk_hw_onecell_data *hw_data = pll_14nm->hw_data;
-
- if (byte_clk_provider)
- *byte_clk_provider = hw_data->hws[DSI_BYTE_PLL_CLK]->clk;
- if (pixel_clk_provider)
- *pixel_clk_provider = hw_data->hws[DSI_PIXEL_PLL_CLK]->clk;
-
- return 0;
-}
-
-static void dsi_pll_14nm_destroy(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
- struct platform_device *pdev = pll_14nm->pdev;
- int num_hws = pll_14nm->num_hws;
-
- of_clk_del_provider(pdev->dev.of_node);
-
- while (num_hws--)
- clk_hw_unregister(pll_14nm->hws[num_hws]);
-}
-
-static struct clk_hw *pll_14nm_postdiv_register(struct dsi_pll_14nm *pll_14nm,
- const char *name,
- const char *parent_name,
- unsigned long flags,
- u8 shift)
-{
- struct dsi_pll_14nm_postdiv *pll_postdiv;
- struct device *dev = &pll_14nm->pdev->dev;
- struct clk_init_data postdiv_init = {
- .parent_names = (const char *[]) { parent_name },
- .num_parents = 1,
- .name = name,
- .flags = flags,
- .ops = &clk_ops_dsi_pll_14nm_postdiv,
- };
- int ret;
-
- pll_postdiv = devm_kzalloc(dev, sizeof(*pll_postdiv), GFP_KERNEL);
- if (!pll_postdiv)
- return ERR_PTR(-ENOMEM);
-
- pll_postdiv->pll = pll_14nm;
- pll_postdiv->shift = shift;
- /* both N1 and N2 postdividers are 4 bits wide */
- pll_postdiv->width = 4;
- /* range of each divider is from 1 to 15 */
- pll_postdiv->flags = CLK_DIVIDER_ONE_BASED;
- pll_postdiv->hw.init = &postdiv_init;
-
- ret = clk_hw_register(dev, &pll_postdiv->hw);
- if (ret)
- return ERR_PTR(ret);
-
- return &pll_postdiv->hw;
-}
-
-static int pll_14nm_register(struct dsi_pll_14nm *pll_14nm)
-{
- char clk_name[32], parent[32], vco_name[32];
- struct clk_init_data vco_init = {
- .parent_names = (const char *[]){ "xo" },
- .num_parents = 1,
- .name = vco_name,
- .flags = CLK_IGNORE_UNUSED,
- .ops = &clk_ops_dsi_pll_14nm_vco,
- };
- struct device *dev = &pll_14nm->pdev->dev;
- struct clk_hw **hws = pll_14nm->hws;
- struct clk_hw_onecell_data *hw_data;
- struct clk_hw *hw;
- int num = 0;
- int ret;
-
- DBG("DSI%d", pll_14nm->id);
-
- hw_data = devm_kzalloc(dev, sizeof(*hw_data) +
- NUM_PROVIDED_CLKS * sizeof(struct clk_hw *),
- GFP_KERNEL);
- if (!hw_data)
- return -ENOMEM;
-
- snprintf(vco_name, 32, "dsi%dvco_clk", pll_14nm->id);
- pll_14nm->base.clk_hw.init = &vco_init;
-
- ret = clk_hw_register(dev, &pll_14nm->base.clk_hw);
- if (ret)
- return ret;
-
- hws[num++] = &pll_14nm->base.clk_hw;
-
- snprintf(clk_name, 32, "dsi%dn1_postdiv_clk", pll_14nm->id);
- snprintf(parent, 32, "dsi%dvco_clk", pll_14nm->id);
-
- /* N1 postdiv, bits 0-3 in REG_DSI_14nm_PHY_CMN_CLK_CFG0 */
- hw = pll_14nm_postdiv_register(pll_14nm, clk_name, parent,
- CLK_SET_RATE_PARENT, 0);
- if (IS_ERR(hw))
- return PTR_ERR(hw);
-
- hws[num++] = hw;
-
- snprintf(clk_name, 32, "dsi%dpllbyte", pll_14nm->id);
- snprintf(parent, 32, "dsi%dn1_postdiv_clk", pll_14nm->id);
-
- /* DSI Byte clock = VCO_CLK / N1 / 8 */
- hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
- CLK_SET_RATE_PARENT, 1, 8);
- if (IS_ERR(hw))
- return PTR_ERR(hw);
-
- hws[num++] = hw;
- hw_data->hws[DSI_BYTE_PLL_CLK] = hw;
-
- snprintf(clk_name, 32, "dsi%dn1_postdivby2_clk", pll_14nm->id);
- snprintf(parent, 32, "dsi%dn1_postdiv_clk", pll_14nm->id);
-
- /*
- * Skip the mux for now, force DSICLK_SEL to 1, Add a /2 divider
- * on the way. Don't let it set parent.
- */
- hw = clk_hw_register_fixed_factor(dev, clk_name, parent, 0, 1, 2);
- if (IS_ERR(hw))
- return PTR_ERR(hw);
-
- hws[num++] = hw;
-
- snprintf(clk_name, 32, "dsi%dpll", pll_14nm->id);
- snprintf(parent, 32, "dsi%dn1_postdivby2_clk", pll_14nm->id);
-
- /* DSI pixel clock = VCO_CLK / N1 / 2 / N2
- * This is the output of N2 post-divider, bits 4-7 in
- * REG_DSI_14nm_PHY_CMN_CLK_CFG0. Don't let it set parent.
- */
- hw = pll_14nm_postdiv_register(pll_14nm, clk_name, parent, 0, 4);
- if (IS_ERR(hw))
- return PTR_ERR(hw);
-
- hws[num++] = hw;
- hw_data->hws[DSI_PIXEL_PLL_CLK] = hw;
-
- pll_14nm->num_hws = num;
-
- hw_data->num = NUM_PROVIDED_CLKS;
- pll_14nm->hw_data = hw_data;
-
- ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
- pll_14nm->hw_data);
- if (ret) {
- DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret);
- return ret;
- }
-
- return 0;
-}
-
-struct msm_dsi_pll *msm_dsi_pll_14nm_init(struct platform_device *pdev, int id)
-{
- struct dsi_pll_14nm *pll_14nm;
- struct msm_dsi_pll *pll;
- int ret;
-
- if (!pdev)
- return ERR_PTR(-ENODEV);
-
- pll_14nm = devm_kzalloc(&pdev->dev, sizeof(*pll_14nm), GFP_KERNEL);
- if (!pll_14nm)
- return ERR_PTR(-ENOMEM);
-
- DBG("PLL%d", id);
-
- pll_14nm->pdev = pdev;
- pll_14nm->id = id;
- pll_14nm_list[id] = pll_14nm;
-
- pll_14nm->phy_cmn_mmio = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
- if (IS_ERR_OR_NULL(pll_14nm->phy_cmn_mmio)) {
- DRM_DEV_ERROR(&pdev->dev, "failed to map CMN PHY base\n");
- return ERR_PTR(-ENOMEM);
- }
-
- pll_14nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL");
- if (IS_ERR_OR_NULL(pll_14nm->mmio)) {
- DRM_DEV_ERROR(&pdev->dev, "failed to map PLL base\n");
- return ERR_PTR(-ENOMEM);
- }
-
- spin_lock_init(&pll_14nm->postdiv_lock);
-
- pll = &pll_14nm->base;
- pll->min_rate = VCO_MIN_RATE;
- pll->max_rate = VCO_MAX_RATE;
- pll->get_provider = dsi_pll_14nm_get_provider;
- pll->destroy = dsi_pll_14nm_destroy;
- pll->disable_seq = dsi_pll_14nm_disable_seq;
- pll->save_state = dsi_pll_14nm_save_state;
- pll->restore_state = dsi_pll_14nm_restore_state;
- pll->set_usecase = dsi_pll_14nm_set_usecase;
-
- pll_14nm->vco_delay = 1;
-
- pll->en_seq_cnt = 1;
- pll->enable_seqs[0] = dsi_pll_14nm_enable_seq;
-
- ret = pll_14nm_register(pll_14nm);
- if (ret) {
- DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
- return ERR_PTR(ret);
- }
-
- return pll;
-}
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c
deleted file mode 100644
index 37a1f996a588..000000000000
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c
+++ /dev/null
@@ -1,643 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
- */
-
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-
-#include "dsi_pll.h"
-#include "dsi.xml.h"
-
-/*
- * DSI PLL 28nm - clock diagram (eg: DSI0):
- *
- * dsi0analog_postdiv_clk
- * | dsi0indirect_path_div2_clk
- * | |
- * +------+ | +----+ | |\ dsi0byte_mux
- * dsi0vco_clk --o--| DIV1 |--o--| /2 |--o--| \ |
- * | +------+ +----+ | m| | +----+
- * | | u|--o--| /4 |-- dsi0pllbyte
- * | | x| +----+
- * o--------------------------| /
- * | |/
- * | +------+
- * o----------| DIV3 |------------------------- dsi0pll
- * +------+
- */
-
-#define POLL_MAX_READS 10
-#define POLL_TIMEOUT_US 50
-
-#define NUM_PROVIDED_CLKS 2
-
-#define VCO_REF_CLK_RATE 19200000
-#define VCO_MIN_RATE 350000000
-#define VCO_MAX_RATE 750000000
-
-#define DSI_BYTE_PLL_CLK 0
-#define DSI_PIXEL_PLL_CLK 1
-
-#define LPFR_LUT_SIZE 10
-struct lpfr_cfg {
- unsigned long vco_rate;
- u32 resistance;
-};
-
-/* Loop filter resistance: */
-static const struct lpfr_cfg lpfr_lut[LPFR_LUT_SIZE] = {
- { 479500000, 8 },
- { 480000000, 11 },
- { 575500000, 8 },
- { 576000000, 12 },
- { 610500000, 8 },
- { 659500000, 9 },
- { 671500000, 10 },
- { 672000000, 14 },
- { 708500000, 10 },
- { 750000000, 11 },
-};
-
-struct pll_28nm_cached_state {
- unsigned long vco_rate;
- u8 postdiv3;
- u8 postdiv1;
- u8 byte_mux;
-};
-
-struct dsi_pll_28nm {
- struct msm_dsi_pll base;
-
- int id;
- struct platform_device *pdev;
- void __iomem *mmio;
-
- int vco_delay;
-
- /* private clocks: */
- struct clk *clks[NUM_DSI_CLOCKS_MAX];
- u32 num_clks;
-
- /* clock-provider: */
- struct clk *provided_clks[NUM_PROVIDED_CLKS];
- struct clk_onecell_data clk_data;
-
- struct pll_28nm_cached_state cached_state;
-};
-
-#define to_pll_28nm(x) container_of(x, struct dsi_pll_28nm, base)
-
-static bool pll_28nm_poll_for_ready(struct dsi_pll_28nm *pll_28nm,
- u32 nb_tries, u32 timeout_us)
-{
- bool pll_locked = false;
- u32 val;
-
- while (nb_tries--) {
- val = pll_read(pll_28nm->mmio + REG_DSI_28nm_PHY_PLL_STATUS);
- pll_locked = !!(val & DSI_28nm_PHY_PLL_STATUS_PLL_RDY);
-
- if (pll_locked)
- break;
-
- udelay(timeout_us);
- }
- DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* ");
-
- return pll_locked;
-}
-
-static void pll_28nm_software_reset(struct dsi_pll_28nm *pll_28nm)
-{
- void __iomem *base = pll_28nm->mmio;
-
- /*
- * Add HW recommended delays after toggling the software
- * reset bit off and back on.
- */
- pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_TEST_CFG,
- DSI_28nm_PHY_PLL_TEST_CFG_PLL_SW_RESET, 1);
- pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_TEST_CFG, 0x00, 1);
-}
-
-/*
- * Clock Callbacks
- */
-static int dsi_pll_28nm_clk_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
- struct device *dev = &pll_28nm->pdev->dev;
- void __iomem *base = pll_28nm->mmio;
- unsigned long div_fbx1000, gen_vco_clk;
- u32 refclk_cfg, frac_n_mode, frac_n_value;
- u32 sdm_cfg0, sdm_cfg1, sdm_cfg2, sdm_cfg3;
- u32 cal_cfg10, cal_cfg11;
- u32 rem;
- int i;
-
- VERB("rate=%lu, parent's=%lu", rate, parent_rate);
-
- /* Force postdiv2 to be div-4 */
- pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV2_CFG, 3);
-
- /* Configure the Loop filter resistance */
- for (i = 0; i < LPFR_LUT_SIZE; i++)
- if (rate <= lpfr_lut[i].vco_rate)
- break;
- if (i == LPFR_LUT_SIZE) {
- DRM_DEV_ERROR(dev, "unable to get loop filter resistance. vco=%lu\n",
- rate);
- return -EINVAL;
- }
- pll_write(base + REG_DSI_28nm_PHY_PLL_LPFR_CFG, lpfr_lut[i].resistance);
-
- /* Loop filter capacitance values : c1 and c2 */
- pll_write(base + REG_DSI_28nm_PHY_PLL_LPFC1_CFG, 0x70);
- pll_write(base + REG_DSI_28nm_PHY_PLL_LPFC2_CFG, 0x15);
-
- rem = rate % VCO_REF_CLK_RATE;
- if (rem) {
- refclk_cfg = DSI_28nm_PHY_PLL_REFCLK_CFG_DBLR;
- frac_n_mode = 1;
- div_fbx1000 = rate / (VCO_REF_CLK_RATE / 500);
- gen_vco_clk = div_fbx1000 * (VCO_REF_CLK_RATE / 500);
- } else {
- refclk_cfg = 0x0;
- frac_n_mode = 0;
- div_fbx1000 = rate / (VCO_REF_CLK_RATE / 1000);
- gen_vco_clk = div_fbx1000 * (VCO_REF_CLK_RATE / 1000);
- }
-
- DBG("refclk_cfg = %d", refclk_cfg);
-
- rem = div_fbx1000 % 1000;
- frac_n_value = (rem << 16) / 1000;
-
- DBG("div_fb = %lu", div_fbx1000);
- DBG("frac_n_value = %d", frac_n_value);
-
- DBG("Generated VCO Clock: %lu", gen_vco_clk);
- rem = 0;
- sdm_cfg1 = pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1);
- sdm_cfg1 &= ~DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET__MASK;
- if (frac_n_mode) {
- sdm_cfg0 = 0x0;
- sdm_cfg0 |= DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV(0);
- sdm_cfg1 |= DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET(
- (u32)(((div_fbx1000 / 1000) & 0x3f) - 1));
- sdm_cfg3 = frac_n_value >> 8;
- sdm_cfg2 = frac_n_value & 0xff;
- } else {
- sdm_cfg0 = DSI_28nm_PHY_PLL_SDM_CFG0_BYP;
- sdm_cfg0 |= DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV(
- (u32)(((div_fbx1000 / 1000) & 0x3f) - 1));
- sdm_cfg1 |= DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET(0);
- sdm_cfg2 = 0;
- sdm_cfg3 = 0;
- }
-
- DBG("sdm_cfg0=%d", sdm_cfg0);
- DBG("sdm_cfg1=%d", sdm_cfg1);
- DBG("sdm_cfg2=%d", sdm_cfg2);
- DBG("sdm_cfg3=%d", sdm_cfg3);
-
- cal_cfg11 = (u32)(gen_vco_clk / (256 * 1000000));
- cal_cfg10 = (u32)((gen_vco_clk % (256 * 1000000)) / 1000000);
- DBG("cal_cfg10=%d, cal_cfg11=%d", cal_cfg10, cal_cfg11);
-
- pll_write(base + REG_DSI_28nm_PHY_PLL_CHGPUMP_CFG, 0x02);
- pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG3, 0x2b);
- pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG4, 0x06);
- pll_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d);
-
- pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1, sdm_cfg1);
- pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG2,
- DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0(sdm_cfg2));
- pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG3,
- DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8(sdm_cfg3));
- pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG4, 0x00);
-
- /* Add hardware recommended delay for correct PLL configuration */
- if (pll_28nm->vco_delay)
- udelay(pll_28nm->vco_delay);
-
- pll_write(base + REG_DSI_28nm_PHY_PLL_REFCLK_CFG, refclk_cfg);
- pll_write(base + REG_DSI_28nm_PHY_PLL_PWRGEN_CFG, 0x00);
- pll_write(base + REG_DSI_28nm_PHY_PLL_VCOLPF_CFG, 0x31);
- pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0, sdm_cfg0);
- pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG0, 0x12);
- pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG6, 0x30);
- pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG7, 0x00);
- pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG8, 0x60);
- pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG9, 0x00);
- pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG10, cal_cfg10 & 0xff);
- pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG11, cal_cfg11 & 0xff);
- pll_write(base + REG_DSI_28nm_PHY_PLL_EFUSE_CFG, 0x20);
-
- return 0;
-}
-
-static int dsi_pll_28nm_clk_is_enabled(struct clk_hw *hw)
-{
- struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
-
- return pll_28nm_poll_for_ready(pll_28nm, POLL_MAX_READS,
- POLL_TIMEOUT_US);
-}
-
-static unsigned long dsi_pll_28nm_clk_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
- void __iomem *base = pll_28nm->mmio;
- u32 sdm0, doubler, sdm_byp_div;
- u32 sdm_dc_off, sdm_freq_seed, sdm2, sdm3;
- u32 ref_clk = VCO_REF_CLK_RATE;
- unsigned long vco_rate;
-
- VERB("parent_rate=%lu", parent_rate);
-
- /* Check to see if the ref clk doubler is enabled */
- doubler = pll_read(base + REG_DSI_28nm_PHY_PLL_REFCLK_CFG) &
- DSI_28nm_PHY_PLL_REFCLK_CFG_DBLR;
- ref_clk += (doubler * VCO_REF_CLK_RATE);
-
- /* see if it is integer mode or sdm mode */
- sdm0 = pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0);
- if (sdm0 & DSI_28nm_PHY_PLL_SDM_CFG0_BYP) {
- /* integer mode */
- sdm_byp_div = FIELD(
- pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0),
- DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV) + 1;
- vco_rate = ref_clk * sdm_byp_div;
- } else {
- /* sdm mode */
- sdm_dc_off = FIELD(
- pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1),
- DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET);
- DBG("sdm_dc_off = %d", sdm_dc_off);
- sdm2 = FIELD(pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG2),
- DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0);
- sdm3 = FIELD(pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG3),
- DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8);
- sdm_freq_seed = (sdm3 << 8) | sdm2;
- DBG("sdm_freq_seed = %d", sdm_freq_seed);
-
- vco_rate = (ref_clk * (sdm_dc_off + 1)) +
- mult_frac(ref_clk, sdm_freq_seed, BIT(16));
- DBG("vco rate = %lu", vco_rate);
- }
-
- DBG("returning vco rate = %lu", vco_rate);
-
- return vco_rate;
-}
-
-static const struct clk_ops clk_ops_dsi_pll_28nm_vco = {
- .round_rate = msm_dsi_pll_helper_clk_round_rate,
- .set_rate = dsi_pll_28nm_clk_set_rate,
- .recalc_rate = dsi_pll_28nm_clk_recalc_rate,
- .prepare = msm_dsi_pll_helper_clk_prepare,
- .unprepare = msm_dsi_pll_helper_clk_unprepare,
- .is_enabled = dsi_pll_28nm_clk_is_enabled,
-};
-
-/*
- * PLL Callbacks
- */
-static int dsi_pll_28nm_enable_seq_hpm(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
- struct device *dev = &pll_28nm->pdev->dev;
- void __iomem *base = pll_28nm->mmio;
- u32 max_reads = 5, timeout_us = 100;
- bool locked;
- u32 val;
- int i;
-
- DBG("id=%d", pll_28nm->id);
-
- pll_28nm_software_reset(pll_28nm);
-
- /*
- * PLL power up sequence.
- * Add necessary delays recommended by hardware.
- */
- val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B;
- pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 1);
-
- val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B;
- pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200);
-
- val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B;
- pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500);
-
- val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE;
- pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600);
-
- for (i = 0; i < 2; i++) {
- /* DSI Uniphy lock detect setting */
- pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2,
- 0x0c, 100);
- pll_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d);
-
- /* poll for PLL ready status */
- locked = pll_28nm_poll_for_ready(pll_28nm,
- max_reads, timeout_us);
- if (locked)
- break;
-
- pll_28nm_software_reset(pll_28nm);
-
- /*
- * PLL power up sequence.
- * Add necessary delays recommended by hardware.
- */
- val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B;
- pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 1);
-
- val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B;
- pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200);
-
- val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B;
- pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 250);
-
- val &= ~DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B;
- pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200);
-
- val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B;
- pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500);
-
- val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE;
- pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600);
- }
-
- if (unlikely(!locked))
- DRM_DEV_ERROR(dev, "DSI PLL lock failed\n");
- else
- DBG("DSI PLL Lock success");
-
- return locked ? 0 : -EINVAL;
-}
-
-static int dsi_pll_28nm_enable_seq_lp(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
- struct device *dev = &pll_28nm->pdev->dev;
- void __iomem *base = pll_28nm->mmio;
- bool locked;
- u32 max_reads = 10, timeout_us = 50;
- u32 val;
-
- DBG("id=%d", pll_28nm->id);
-
- pll_28nm_software_reset(pll_28nm);
-
- /*
- * PLL power up sequence.
- * Add necessary delays recommended by hardware.
- */
- pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_CAL_CFG1, 0x34, 500);
-
- val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B;
- pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500);
-
- val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B;
- pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500);
-
- val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B |
- DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE;
- pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500);
-
- /* DSI PLL toggle lock detect setting */
- pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x04, 500);
- pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x05, 512);
-
- locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, timeout_us);
-
- if (unlikely(!locked))
- DRM_DEV_ERROR(dev, "DSI PLL lock failed\n");
- else
- DBG("DSI PLL lock success");
-
- return locked ? 0 : -EINVAL;
-}
-
-static void dsi_pll_28nm_disable_seq(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
-
- DBG("id=%d", pll_28nm->id);
- pll_write(pll_28nm->mmio + REG_DSI_28nm_PHY_PLL_GLB_CFG, 0x00);
-}
-
-static void dsi_pll_28nm_save_state(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
- struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state;
- void __iomem *base = pll_28nm->mmio;
-
- cached_state->postdiv3 =
- pll_read(base + REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG);
- cached_state->postdiv1 =
- pll_read(base + REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG);
- cached_state->byte_mux = pll_read(base + REG_DSI_28nm_PHY_PLL_VREG_CFG);
- if (dsi_pll_28nm_clk_is_enabled(&pll->clk_hw))
- cached_state->vco_rate = clk_hw_get_rate(&pll->clk_hw);
- else
- cached_state->vco_rate = 0;
-}
-
-static int dsi_pll_28nm_restore_state(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
- struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state;
- void __iomem *base = pll_28nm->mmio;
- int ret;
-
- ret = dsi_pll_28nm_clk_set_rate(&pll->clk_hw,
- cached_state->vco_rate, 0);
- if (ret) {
- DRM_DEV_ERROR(&pll_28nm->pdev->dev,
- "restore vco rate failed. ret=%d\n", ret);
- return ret;
- }
-
- pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG,
- cached_state->postdiv3);
- pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG,
- cached_state->postdiv1);
- pll_write(base + REG_DSI_28nm_PHY_PLL_VREG_CFG,
- cached_state->byte_mux);
-
- return 0;
-}
-
-static int dsi_pll_28nm_get_provider(struct msm_dsi_pll *pll,
- struct clk **byte_clk_provider,
- struct clk **pixel_clk_provider)
-{
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
-
- if (byte_clk_provider)
- *byte_clk_provider = pll_28nm->provided_clks[DSI_BYTE_PLL_CLK];
- if (pixel_clk_provider)
- *pixel_clk_provider =
- pll_28nm->provided_clks[DSI_PIXEL_PLL_CLK];
-
- return 0;
-}
-
-static void dsi_pll_28nm_destroy(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
- int i;
-
- msm_dsi_pll_helper_unregister_clks(pll_28nm->pdev,
- pll_28nm->clks, pll_28nm->num_clks);
-
- for (i = 0; i < NUM_PROVIDED_CLKS; i++)
- pll_28nm->provided_clks[i] = NULL;
-
- pll_28nm->num_clks = 0;
- pll_28nm->clk_data.clks = NULL;
- pll_28nm->clk_data.clk_num = 0;
-}
-
-static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm)
-{
- char clk_name[32], parent1[32], parent2[32], vco_name[32];
- struct clk_init_data vco_init = {
- .parent_names = (const char *[]){ "xo" },
- .num_parents = 1,
- .name = vco_name,
- .flags = CLK_IGNORE_UNUSED,
- .ops = &clk_ops_dsi_pll_28nm_vco,
- };
- struct device *dev = &pll_28nm->pdev->dev;
- struct clk **clks = pll_28nm->clks;
- struct clk **provided_clks = pll_28nm->provided_clks;
- int num = 0;
- int ret;
-
- DBG("%d", pll_28nm->id);
-
- snprintf(vco_name, 32, "dsi%dvco_clk", pll_28nm->id);
- pll_28nm->base.clk_hw.init = &vco_init;
- clks[num++] = clk_register(dev, &pll_28nm->base.clk_hw);
-
- snprintf(clk_name, 32, "dsi%danalog_postdiv_clk", pll_28nm->id);
- snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->id);
- clks[num++] = clk_register_divider(dev, clk_name,
- parent1, CLK_SET_RATE_PARENT,
- pll_28nm->mmio +
- REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG,
- 0, 4, 0, NULL);
-
- snprintf(clk_name, 32, "dsi%dindirect_path_div2_clk", pll_28nm->id);
- snprintf(parent1, 32, "dsi%danalog_postdiv_clk", pll_28nm->id);
- clks[num++] = clk_register_fixed_factor(dev, clk_name,
- parent1, CLK_SET_RATE_PARENT,
- 1, 2);
-
- snprintf(clk_name, 32, "dsi%dpll", pll_28nm->id);
- snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->id);
- clks[num++] = provided_clks[DSI_PIXEL_PLL_CLK] =
- clk_register_divider(dev, clk_name,
- parent1, 0, pll_28nm->mmio +
- REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG,
- 0, 8, 0, NULL);
-
- snprintf(clk_name, 32, "dsi%dbyte_mux", pll_28nm->id);
- snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->id);
- snprintf(parent2, 32, "dsi%dindirect_path_div2_clk", pll_28nm->id);
- clks[num++] = clk_register_mux(dev, clk_name,
- ((const char *[]){
- parent1, parent2
- }), 2, CLK_SET_RATE_PARENT, pll_28nm->mmio +
- REG_DSI_28nm_PHY_PLL_VREG_CFG, 1, 1, 0, NULL);
-
- snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->id);
- snprintf(parent1, 32, "dsi%dbyte_mux", pll_28nm->id);
- clks[num++] = provided_clks[DSI_BYTE_PLL_CLK] =
- clk_register_fixed_factor(dev, clk_name,
- parent1, CLK_SET_RATE_PARENT, 1, 4);
-
- pll_28nm->num_clks = num;
-
- pll_28nm->clk_data.clk_num = NUM_PROVIDED_CLKS;
- pll_28nm->clk_data.clks = provided_clks;
-
- ret = of_clk_add_provider(dev->of_node,
- of_clk_src_onecell_get, &pll_28nm->clk_data);
- if (ret) {
- DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret);
- return ret;
- }
-
- return 0;
-}
-
-struct msm_dsi_pll *msm_dsi_pll_28nm_init(struct platform_device *pdev,
- enum msm_dsi_phy_type type, int id)
-{
- struct dsi_pll_28nm *pll_28nm;
- struct msm_dsi_pll *pll;
- int ret;
-
- if (!pdev)
- return ERR_PTR(-ENODEV);
-
- pll_28nm = devm_kzalloc(&pdev->dev, sizeof(*pll_28nm), GFP_KERNEL);
- if (!pll_28nm)
- return ERR_PTR(-ENOMEM);
-
- pll_28nm->pdev = pdev;
- pll_28nm->id = id;
-
- pll_28nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL");
- if (IS_ERR_OR_NULL(pll_28nm->mmio)) {
- DRM_DEV_ERROR(&pdev->dev, "%s: failed to map pll base\n", __func__);
- return ERR_PTR(-ENOMEM);
- }
-
- pll = &pll_28nm->base;
- pll->min_rate = VCO_MIN_RATE;
- pll->max_rate = VCO_MAX_RATE;
- pll->get_provider = dsi_pll_28nm_get_provider;
- pll->destroy = dsi_pll_28nm_destroy;
- pll->disable_seq = dsi_pll_28nm_disable_seq;
- pll->save_state = dsi_pll_28nm_save_state;
- pll->restore_state = dsi_pll_28nm_restore_state;
-
- if (type == MSM_DSI_PHY_28NM_HPM) {
- pll_28nm->vco_delay = 1;
-
- pll->en_seq_cnt = 3;
- pll->enable_seqs[0] = dsi_pll_28nm_enable_seq_hpm;
- pll->enable_seqs[1] = dsi_pll_28nm_enable_seq_hpm;
- pll->enable_seqs[2] = dsi_pll_28nm_enable_seq_hpm;
- } else if (type == MSM_DSI_PHY_28NM_LP) {
- pll_28nm->vco_delay = 1000;
-
- pll->en_seq_cnt = 1;
- pll->enable_seqs[0] = dsi_pll_28nm_enable_seq_lp;
- } else {
- DRM_DEV_ERROR(&pdev->dev, "phy type (%d) is not 28nm\n", type);
- return ERR_PTR(-EINVAL);
- }
-
- ret = pll_28nm_register(pll_28nm);
- if (ret) {
- DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
- return ERR_PTR(ret);
- }
-
- return pll;
-}
-
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
deleted file mode 100644
index a6e7a2525fe0..000000000000
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
+++ /dev/null
@@ -1,526 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
- */
-
-#include <linux/clk-provider.h>
-
-#include "dsi_pll.h"
-#include "dsi.xml.h"
-
-/*
- * DSI PLL 28nm (8960/A family) - clock diagram (eg: DSI1):
- *
- *
- * +------+
- * dsi1vco_clk ----o-----| DIV1 |---dsi1pllbit (not exposed as clock)
- * F * byte_clk | +------+
- * | bit clock divider (F / 8)
- * |
- * | +------+
- * o-----| DIV2 |---dsi0pllbyte---o---> To byte RCG
- * | +------+ | (sets parent rate)
- * | byte clock divider (F) |
- * | |
- * | o---> To esc RCG
- * | (doesn't set parent rate)
- * |
- * | +------+
- * o-----| DIV3 |----dsi0pll------o---> To dsi RCG
- * +------+ | (sets parent rate)
- * dsi clock divider (F * magic) |
- * |
- * o---> To pixel rcg
- * (doesn't set parent rate)
- */
-
-#define POLL_MAX_READS 8000
-#define POLL_TIMEOUT_US 1
-
-#define NUM_PROVIDED_CLKS 2
-
-#define VCO_REF_CLK_RATE 27000000
-#define VCO_MIN_RATE 600000000
-#define VCO_MAX_RATE 1200000000
-
-#define DSI_BYTE_PLL_CLK 0
-#define DSI_PIXEL_PLL_CLK 1
-
-#define VCO_PREF_DIV_RATIO 27
-
-struct pll_28nm_cached_state {
- unsigned long vco_rate;
- u8 postdiv3;
- u8 postdiv2;
- u8 postdiv1;
-};
-
-struct clk_bytediv {
- struct clk_hw hw;
- void __iomem *reg;
-};
-
-struct dsi_pll_28nm {
- struct msm_dsi_pll base;
-
- int id;
- struct platform_device *pdev;
- void __iomem *mmio;
-
- /* custom byte clock divider */
- struct clk_bytediv *bytediv;
-
- /* private clocks: */
- struct clk *clks[NUM_DSI_CLOCKS_MAX];
- u32 num_clks;
-
- /* clock-provider: */
- struct clk *provided_clks[NUM_PROVIDED_CLKS];
- struct clk_onecell_data clk_data;
-
- struct pll_28nm_cached_state cached_state;
-};
-
-#define to_pll_28nm(x) container_of(x, struct dsi_pll_28nm, base)
-
-static bool pll_28nm_poll_for_ready(struct dsi_pll_28nm *pll_28nm,
- int nb_tries, int timeout_us)
-{
- bool pll_locked = false;
- u32 val;
-
- while (nb_tries--) {
- val = pll_read(pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_RDY);
- pll_locked = !!(val & DSI_28nm_8960_PHY_PLL_RDY_PLL_RDY);
-
- if (pll_locked)
- break;
-
- udelay(timeout_us);
- }
- DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* ");
-
- return pll_locked;
-}
-
-/*
- * Clock Callbacks
- */
-static int dsi_pll_28nm_clk_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
- void __iomem *base = pll_28nm->mmio;
- u32 val, temp, fb_divider;
-
- DBG("rate=%lu, parent's=%lu", rate, parent_rate);
-
- temp = rate / 10;
- val = VCO_REF_CLK_RATE / 10;
- fb_divider = (temp * VCO_PREF_DIV_RATIO) / val;
- fb_divider = fb_divider / 2 - 1;
- pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1,
- fb_divider & 0xff);
-
- val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2);
-
- val |= (fb_divider >> 8) & 0x07;
-
- pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2,
- val);
-
- val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3);
-
- val |= (VCO_PREF_DIV_RATIO - 1) & 0x3f;
-
- pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3,
- val);
-
- pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_6,
- 0xf);
-
- val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
- val |= 0x7 << 4;
- pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8,
- val);
-
- return 0;
-}
-
-static int dsi_pll_28nm_clk_is_enabled(struct clk_hw *hw)
-{
- struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
-
- return pll_28nm_poll_for_ready(pll_28nm, POLL_MAX_READS,
- POLL_TIMEOUT_US);
-}
-
-static unsigned long dsi_pll_28nm_clk_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
- void __iomem *base = pll_28nm->mmio;
- unsigned long vco_rate;
- u32 status, fb_divider, temp, ref_divider;
-
- VERB("parent_rate=%lu", parent_rate);
-
- status = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0);
-
- if (status & DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE) {
- fb_divider = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1);
- fb_divider &= 0xff;
- temp = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2) & 0x07;
- fb_divider = (temp << 8) | fb_divider;
- fb_divider += 1;
-
- ref_divider = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3);
- ref_divider &= 0x3f;
- ref_divider += 1;
-
- /* multiply by 2 */
- vco_rate = (parent_rate / ref_divider) * fb_divider * 2;
- } else {
- vco_rate = 0;
- }
-
- DBG("returning vco rate = %lu", vco_rate);
-
- return vco_rate;
-}
-
-static const struct clk_ops clk_ops_dsi_pll_28nm_vco = {
- .round_rate = msm_dsi_pll_helper_clk_round_rate,
- .set_rate = dsi_pll_28nm_clk_set_rate,
- .recalc_rate = dsi_pll_28nm_clk_recalc_rate,
- .prepare = msm_dsi_pll_helper_clk_prepare,
- .unprepare = msm_dsi_pll_helper_clk_unprepare,
- .is_enabled = dsi_pll_28nm_clk_is_enabled,
-};
-
-/*
- * Custom byte clock divier clk_ops
- *
- * This clock is the entry point to configuring the PLL. The user (dsi host)
- * will set this clock's rate to the desired byte clock rate. The VCO lock
- * frequency is a multiple of the byte clock rate. The multiplication factor
- * (shown as F in the diagram above) is a function of the byte clock rate.
- *
- * This custom divider clock ensures that its parent (VCO) is set to the
- * desired rate, and that the byte clock postdivider (POSTDIV2) is configured
- * accordingly
- */
-#define to_clk_bytediv(_hw) container_of(_hw, struct clk_bytediv, hw)
-
-static unsigned long clk_bytediv_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct clk_bytediv *bytediv = to_clk_bytediv(hw);
- unsigned int div;
-
- div = pll_read(bytediv->reg) & 0xff;
-
- return parent_rate / (div + 1);
-}
-
-/* find multiplication factor(wrt byte clock) at which the VCO should be set */
-static unsigned int get_vco_mul_factor(unsigned long byte_clk_rate)
-{
- unsigned long bit_mhz;
-
- /* convert to bit clock in Mhz */
- bit_mhz = (byte_clk_rate * 8) / 1000000;
-
- if (bit_mhz < 125)
- return 64;
- else if (bit_mhz < 250)
- return 32;
- else if (bit_mhz < 600)
- return 16;
- else
- return 8;
-}
-
-static long clk_bytediv_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate)
-{
- unsigned long best_parent;
- unsigned int factor;
-
- factor = get_vco_mul_factor(rate);
-
- best_parent = rate * factor;
- *prate = clk_hw_round_rate(clk_hw_get_parent(hw), best_parent);
-
- return *prate / factor;
-}
-
-static int clk_bytediv_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_bytediv *bytediv = to_clk_bytediv(hw);
- u32 val;
- unsigned int factor;
-
- factor = get_vco_mul_factor(rate);
-
- val = pll_read(bytediv->reg);
- val |= (factor - 1) & 0xff;
- pll_write(bytediv->reg, val);
-
- return 0;
-}
-
-/* Our special byte clock divider ops */
-static const struct clk_ops clk_bytediv_ops = {
- .round_rate = clk_bytediv_round_rate,
- .set_rate = clk_bytediv_set_rate,
- .recalc_rate = clk_bytediv_recalc_rate,
-};
-
-/*
- * PLL Callbacks
- */
-static int dsi_pll_28nm_enable_seq(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
- struct device *dev = &pll_28nm->pdev->dev;
- void __iomem *base = pll_28nm->mmio;
- bool locked;
- unsigned int bit_div, byte_div;
- int max_reads = 1000, timeout_us = 100;
- u32 val;
-
- DBG("id=%d", pll_28nm->id);
-
- /*
- * before enabling the PLL, configure the bit clock divider since we
- * don't expose it as a clock to the outside world
- * 1: read back the byte clock divider that should already be set
- * 2: divide by 8 to get bit clock divider
- * 3: write it to POSTDIV1
- */
- val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9);
- byte_div = val + 1;
- bit_div = byte_div / 8;
-
- val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
- val &= ~0xf;
- val |= (bit_div - 1);
- pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8, val);
-
- /* enable the PLL */
- pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0,
- DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE);
-
- locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, timeout_us);
-
- if (unlikely(!locked))
- DRM_DEV_ERROR(dev, "DSI PLL lock failed\n");
- else
- DBG("DSI PLL lock success");
-
- return locked ? 0 : -EINVAL;
-}
-
-static void dsi_pll_28nm_disable_seq(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
-
- DBG("id=%d", pll_28nm->id);
- pll_write(pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_0, 0x00);
-}
-
-static void dsi_pll_28nm_save_state(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
- struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state;
- void __iomem *base = pll_28nm->mmio;
-
- cached_state->postdiv3 =
- pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_10);
- cached_state->postdiv2 =
- pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9);
- cached_state->postdiv1 =
- pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
-
- cached_state->vco_rate = clk_hw_get_rate(&pll->clk_hw);
-}
-
-static int dsi_pll_28nm_restore_state(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
- struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state;
- void __iomem *base = pll_28nm->mmio;
- int ret;
-
- ret = dsi_pll_28nm_clk_set_rate(&pll->clk_hw,
- cached_state->vco_rate, 0);
- if (ret) {
- DRM_DEV_ERROR(&pll_28nm->pdev->dev,
- "restore vco rate failed. ret=%d\n", ret);
- return ret;
- }
-
- pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_10,
- cached_state->postdiv3);
- pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9,
- cached_state->postdiv2);
- pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8,
- cached_state->postdiv1);
-
- return 0;
-}
-
-static int dsi_pll_28nm_get_provider(struct msm_dsi_pll *pll,
- struct clk **byte_clk_provider,
- struct clk **pixel_clk_provider)
-{
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
-
- if (byte_clk_provider)
- *byte_clk_provider = pll_28nm->provided_clks[DSI_BYTE_PLL_CLK];
- if (pixel_clk_provider)
- *pixel_clk_provider =
- pll_28nm->provided_clks[DSI_PIXEL_PLL_CLK];
-
- return 0;
-}
-
-static void dsi_pll_28nm_destroy(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
-
- msm_dsi_pll_helper_unregister_clks(pll_28nm->pdev,
- pll_28nm->clks, pll_28nm->num_clks);
-}
-
-static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm)
-{
- char *clk_name, *parent_name, *vco_name;
- struct clk_init_data vco_init = {
- .parent_names = (const char *[]){ "pxo" },
- .num_parents = 1,
- .flags = CLK_IGNORE_UNUSED,
- .ops = &clk_ops_dsi_pll_28nm_vco,
- };
- struct device *dev = &pll_28nm->pdev->dev;
- struct clk **clks = pll_28nm->clks;
- struct clk **provided_clks = pll_28nm->provided_clks;
- struct clk_bytediv *bytediv;
- struct clk_init_data bytediv_init = { };
- int ret, num = 0;
-
- DBG("%d", pll_28nm->id);
-
- bytediv = devm_kzalloc(dev, sizeof(*bytediv), GFP_KERNEL);
- if (!bytediv)
- return -ENOMEM;
-
- vco_name = devm_kzalloc(dev, 32, GFP_KERNEL);
- if (!vco_name)
- return -ENOMEM;
-
- parent_name = devm_kzalloc(dev, 32, GFP_KERNEL);
- if (!parent_name)
- return -ENOMEM;
-
- clk_name = devm_kzalloc(dev, 32, GFP_KERNEL);
- if (!clk_name)
- return -ENOMEM;
-
- pll_28nm->bytediv = bytediv;
-
- snprintf(vco_name, 32, "dsi%dvco_clk", pll_28nm->id);
- vco_init.name = vco_name;
-
- pll_28nm->base.clk_hw.init = &vco_init;
-
- clks[num++] = clk_register(dev, &pll_28nm->base.clk_hw);
-
- /* prepare and register bytediv */
- bytediv->hw.init = &bytediv_init;
- bytediv->reg = pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_9;
-
- snprintf(parent_name, 32, "dsi%dvco_clk", pll_28nm->id);
- snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->id);
-
- bytediv_init.name = clk_name;
- bytediv_init.ops = &clk_bytediv_ops;
- bytediv_init.flags = CLK_SET_RATE_PARENT;
- bytediv_init.parent_names = (const char * const *) &parent_name;
- bytediv_init.num_parents = 1;
-
- /* DIV2 */
- clks[num++] = provided_clks[DSI_BYTE_PLL_CLK] =
- clk_register(dev, &bytediv->hw);
-
- snprintf(clk_name, 32, "dsi%dpll", pll_28nm->id);
- /* DIV3 */
- clks[num++] = provided_clks[DSI_PIXEL_PLL_CLK] =
- clk_register_divider(dev, clk_name,
- parent_name, 0, pll_28nm->mmio +
- REG_DSI_28nm_8960_PHY_PLL_CTRL_10,
- 0, 8, 0, NULL);
-
- pll_28nm->num_clks = num;
-
- pll_28nm->clk_data.clk_num = NUM_PROVIDED_CLKS;
- pll_28nm->clk_data.clks = provided_clks;
-
- ret = of_clk_add_provider(dev->of_node,
- of_clk_src_onecell_get, &pll_28nm->clk_data);
- if (ret) {
- DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret);
- return ret;
- }
-
- return 0;
-}
-
-struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev,
- int id)
-{
- struct dsi_pll_28nm *pll_28nm;
- struct msm_dsi_pll *pll;
- int ret;
-
- if (!pdev)
- return ERR_PTR(-ENODEV);
-
- pll_28nm = devm_kzalloc(&pdev->dev, sizeof(*pll_28nm), GFP_KERNEL);
- if (!pll_28nm)
- return ERR_PTR(-ENOMEM);
-
- pll_28nm->pdev = pdev;
- pll_28nm->id = id + 1;
-
- pll_28nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL");
- if (IS_ERR_OR_NULL(pll_28nm->mmio)) {
- DRM_DEV_ERROR(&pdev->dev, "%s: failed to map pll base\n", __func__);
- return ERR_PTR(-ENOMEM);
- }
-
- pll = &pll_28nm->base;
- pll->min_rate = VCO_MIN_RATE;
- pll->max_rate = VCO_MAX_RATE;
- pll->get_provider = dsi_pll_28nm_get_provider;
- pll->destroy = dsi_pll_28nm_destroy;
- pll->disable_seq = dsi_pll_28nm_disable_seq;
- pll->save_state = dsi_pll_28nm_save_state;
- pll->restore_state = dsi_pll_28nm_restore_state;
-
- pll->en_seq_cnt = 1;
- pll->enable_seqs[0] = dsi_pll_28nm_enable_seq;
-
- ret = pll_28nm_register(pll_28nm);
- if (ret) {
- DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
- return ERR_PTR(ret);
- }
-
- return pll;
-}
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c
deleted file mode 100644
index 93bf142e4a4e..000000000000
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c
+++ /dev/null
@@ -1,912 +0,0 @@
-/*
- * SPDX-License-Identifier: GPL-2.0
- * Copyright (c) 2018, The Linux Foundation
- */
-
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/iopoll.h>
-
-#include "dsi_pll.h"
-#include "dsi.xml.h"
-
-/*
- * DSI PLL 7nm - clock diagram (eg: DSI0): TODO: updated CPHY diagram
- *
- * dsi0_pll_out_div_clk dsi0_pll_bit_clk
- * | |
- * | |
- * +---------+ | +----------+ | +----+
- * dsi0vco_clk ---| out_div |--o--| divl_3_0 |--o--| /8 |-- dsi0_phy_pll_out_byteclk
- * +---------+ | +----------+ | +----+
- * | |
- * | | dsi0_pll_by_2_bit_clk
- * | | |
- * | | +----+ | |\ dsi0_pclk_mux
- * | |--| /2 |--o--| \ |
- * | | +----+ | \ | +---------+
- * | --------------| |--o--| div_7_4 |-- dsi0_phy_pll_out_dsiclk
- * |------------------------------| / +---------+
- * | +-----+ | /
- * -----------| /4? |--o----------|/
- * +-----+ | |
- * | |dsiclk_sel
- * |
- * dsi0_pll_post_out_div_clk
- */
-
-#define DSI_BYTE_PLL_CLK 0
-#define DSI_PIXEL_PLL_CLK 1
-#define NUM_PROVIDED_CLKS 2
-
-#define VCO_REF_CLK_RATE 19200000
-
-struct dsi_pll_regs {
- u32 pll_prop_gain_rate;
- u32 pll_lockdet_rate;
- u32 decimal_div_start;
- u32 frac_div_start_low;
- u32 frac_div_start_mid;
- u32 frac_div_start_high;
- u32 pll_clock_inverters;
- u32 ssc_stepsize_low;
- u32 ssc_stepsize_high;
- u32 ssc_div_per_low;
- u32 ssc_div_per_high;
- u32 ssc_adjper_low;
- u32 ssc_adjper_high;
- u32 ssc_control;
-};
-
-struct dsi_pll_config {
- u32 ref_freq;
- bool div_override;
- u32 output_div;
- bool ignore_frac;
- bool disable_prescaler;
- bool enable_ssc;
- bool ssc_center;
- u32 dec_bits;
- u32 frac_bits;
- u32 lock_timer;
- u32 ssc_freq;
- u32 ssc_offset;
- u32 ssc_adj_per;
- u32 thresh_cycles;
- u32 refclk_cycles;
-};
-
-struct pll_7nm_cached_state {
- unsigned long vco_rate;
- u8 bit_clk_div;
- u8 pix_clk_div;
- u8 pll_out_div;
- u8 pll_mux;
-};
-
-struct dsi_pll_7nm {
- struct msm_dsi_pll base;
-
- int id;
- struct platform_device *pdev;
-
- void __iomem *phy_cmn_mmio;
- void __iomem *mmio;
-
- u64 vco_ref_clk_rate;
- u64 vco_current_rate;
-
- /* protects REG_DSI_7nm_PHY_CMN_CLK_CFG0 register */
- spinlock_t postdiv_lock;
-
- int vco_delay;
- struct dsi_pll_config pll_configuration;
- struct dsi_pll_regs reg_setup;
-
- /* private clocks: */
- struct clk_hw *out_div_clk_hw;
- struct clk_hw *bit_clk_hw;
- struct clk_hw *byte_clk_hw;
- struct clk_hw *by_2_bit_clk_hw;
- struct clk_hw *post_out_div_clk_hw;
- struct clk_hw *pclk_mux_hw;
- struct clk_hw *out_dsiclk_hw;
-
- /* clock-provider: */
- struct clk_hw_onecell_data *hw_data;
-
- struct pll_7nm_cached_state cached_state;
-
- enum msm_dsi_phy_usecase uc;
- struct dsi_pll_7nm *slave;
-};
-
-#define to_pll_7nm(x) container_of(x, struct dsi_pll_7nm, base)
-
-/*
- * Global list of private DSI PLL struct pointers. We need this for Dual DSI
- * mode, where the master PLL's clk_ops needs access the slave's private data
- */
-static struct dsi_pll_7nm *pll_7nm_list[DSI_MAX];
-
-static void dsi_pll_setup_config(struct dsi_pll_7nm *pll)
-{
- struct dsi_pll_config *config = &pll->pll_configuration;
-
- config->ref_freq = pll->vco_ref_clk_rate;
- config->output_div = 1;
- config->dec_bits = 8;
- config->frac_bits = 18;
- config->lock_timer = 64;
- config->ssc_freq = 31500;
- config->ssc_offset = 4800;
- config->ssc_adj_per = 2;
- config->thresh_cycles = 32;
- config->refclk_cycles = 256;
-
- config->div_override = false;
- config->ignore_frac = false;
- config->disable_prescaler = false;
-
- /* TODO: ssc enable */
- config->enable_ssc = false;
- config->ssc_center = 0;
-}
-
-static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll)
-{
- struct dsi_pll_config *config = &pll->pll_configuration;
- struct dsi_pll_regs *regs = &pll->reg_setup;
- u64 fref = pll->vco_ref_clk_rate;
- u64 pll_freq;
- u64 divider;
- u64 dec, dec_multiple;
- u32 frac;
- u64 multiplier;
-
- pll_freq = pll->vco_current_rate;
-
- if (config->disable_prescaler)
- divider = fref;
- else
- divider = fref * 2;
-
- multiplier = 1 << config->frac_bits;
- dec_multiple = div_u64(pll_freq * multiplier, divider);
- div_u64_rem(dec_multiple, multiplier, &frac);
-
- dec = div_u64(dec_multiple, multiplier);
-
- if (pll->base.type != MSM_DSI_PHY_7NM_V4_1)
- regs->pll_clock_inverters = 0x28;
- else if (pll_freq <= 1000000000ULL)
- regs->pll_clock_inverters = 0xa0;
- else if (pll_freq <= 2500000000ULL)
- regs->pll_clock_inverters = 0x20;
- else if (pll_freq <= 3020000000ULL)
- regs->pll_clock_inverters = 0x00;
- else
- regs->pll_clock_inverters = 0x40;
-
- regs->pll_lockdet_rate = config->lock_timer;
- regs->decimal_div_start = dec;
- regs->frac_div_start_low = (frac & 0xff);
- regs->frac_div_start_mid = (frac & 0xff00) >> 8;
- regs->frac_div_start_high = (frac & 0x30000) >> 16;
-}
-
-#define SSC_CENTER BIT(0)
-#define SSC_EN BIT(1)
-
-static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll)
-{
- struct dsi_pll_config *config = &pll->pll_configuration;
- struct dsi_pll_regs *regs = &pll->reg_setup;
- u32 ssc_per;
- u32 ssc_mod;
- u64 ssc_step_size;
- u64 frac;
-
- if (!config->enable_ssc) {
- DBG("SSC not enabled\n");
- return;
- }
-
- ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / 2 - 1;
- ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1);
- ssc_per -= ssc_mod;
-
- frac = regs->frac_div_start_low |
- (regs->frac_div_start_mid << 8) |
- (regs->frac_div_start_high << 16);
- ssc_step_size = regs->decimal_div_start;
- ssc_step_size *= (1 << config->frac_bits);
- ssc_step_size += frac;
- ssc_step_size *= config->ssc_offset;
- ssc_step_size *= (config->ssc_adj_per + 1);
- ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1));
- ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000);
-
- regs->ssc_div_per_low = ssc_per & 0xFF;
- regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8;
- regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF);
- regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8);
- regs->ssc_adjper_low = config->ssc_adj_per & 0xFF;
- regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8;
-
- regs->ssc_control = config->ssc_center ? SSC_CENTER : 0;
-
- pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n",
- regs->decimal_div_start, frac, config->frac_bits);
- pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n",
- ssc_per, (u32)ssc_step_size, config->ssc_adj_per);
-}
-
-static void dsi_pll_ssc_commit(struct dsi_pll_7nm *pll)
-{
- void __iomem *base = pll->mmio;
- struct dsi_pll_regs *regs = &pll->reg_setup;
-
- if (pll->pll_configuration.enable_ssc) {
- pr_debug("SSC is enabled\n");
-
- pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_LOW_1,
- regs->ssc_stepsize_low);
- pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_HIGH_1,
- regs->ssc_stepsize_high);
- pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_LOW_1,
- regs->ssc_div_per_low);
- pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_HIGH_1,
- regs->ssc_div_per_high);
- pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_LOW_1,
- regs->ssc_adjper_low);
- pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_HIGH_1,
- regs->ssc_adjper_high);
- pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_CONTROL,
- SSC_EN | regs->ssc_control);
- }
-}
-
-static void dsi_pll_config_hzindep_reg(struct dsi_pll_7nm *pll)
-{
- void __iomem *base = pll->mmio;
- u8 analog_controls_five_1 = 0x01, vco_config_1 = 0x00;
-
- if (pll->base.type == MSM_DSI_PHY_7NM_V4_1) {
- if (pll->vco_current_rate >= 3100000000ULL)
- analog_controls_five_1 = 0x03;
-
- if (pll->vco_current_rate < 1520000000ULL)
- vco_config_1 = 0x08;
- else if (pll->vco_current_rate < 2990000000ULL)
- vco_config_1 = 0x01;
- }
-
- pll_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_FIVE_1,
- analog_controls_five_1);
- pll_write(base + REG_DSI_7nm_PHY_PLL_VCO_CONFIG_1, vco_config_1);
- pll_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_FIVE, 0x01);
- pll_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_TWO, 0x03);
- pll_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_THREE, 0x00);
- pll_write(base + REG_DSI_7nm_PHY_PLL_DSM_DIVIDER, 0x00);
- pll_write(base + REG_DSI_7nm_PHY_PLL_FEEDBACK_DIVIDER, 0x4e);
- pll_write(base + REG_DSI_7nm_PHY_PLL_CALIBRATION_SETTINGS, 0x40);
- pll_write(base + REG_DSI_7nm_PHY_PLL_BAND_SEL_CAL_SETTINGS_THREE, 0xba);
- pll_write(base + REG_DSI_7nm_PHY_PLL_FREQ_DETECT_SETTINGS_ONE, 0x0c);
- pll_write(base + REG_DSI_7nm_PHY_PLL_OUTDIV, 0x00);
- pll_write(base + REG_DSI_7nm_PHY_PLL_CORE_OVERRIDE, 0x00);
- pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_DIGITAL_TIMERS_TWO, 0x08);
- pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_PROP_GAIN_RATE_1, 0x0a);
- pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_BAND_SEL_RATE_1, 0xc0);
- pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_INT_GAIN_IFILT_BAND_1, 0x84);
- pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_INT_GAIN_IFILT_BAND_1, 0x82);
- pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_FL_INT_GAIN_PFILT_BAND_1, 0x4c);
- pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCK_OVERRIDE, 0x80);
- pll_write(base + REG_DSI_7nm_PHY_PLL_PFILT, 0x29);
- pll_write(base + REG_DSI_7nm_PHY_PLL_PFILT, 0x2f);
- pll_write(base + REG_DSI_7nm_PHY_PLL_IFILT, 0x2a);
- pll_write(base + REG_DSI_7nm_PHY_PLL_IFILT,
- pll->base.type == MSM_DSI_PHY_7NM_V4_1 ? 0x3f : 0x22);
-
- if (pll->base.type == MSM_DSI_PHY_7NM_V4_1) {
- pll_write(base + REG_DSI_7nm_PHY_PLL_PERF_OPTIMIZE, 0x22);
- if (pll->slave)
- pll_write(pll->slave->mmio + REG_DSI_7nm_PHY_PLL_PERF_OPTIMIZE, 0x22);
- }
-}
-
-static void dsi_pll_commit(struct dsi_pll_7nm *pll)
-{
- void __iomem *base = pll->mmio;
- struct dsi_pll_regs *reg = &pll->reg_setup;
-
- pll_write(base + REG_DSI_7nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12);
- pll_write(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1, reg->decimal_div_start);
- pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1, reg->frac_div_start_low);
- pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1, reg->frac_div_start_mid);
- pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1, reg->frac_div_start_high);
- pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, 0x40);
- pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCK_DELAY, 0x06);
- pll_write(base + REG_DSI_7nm_PHY_PLL_CMODE_1, 0x10); /* TODO: 0x00 for CPHY */
- pll_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS, reg->pll_clock_inverters);
-}
-
-static int dsi_pll_7nm_vco_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll);
-
- DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_7nm->id, rate,
- parent_rate);
-
- pll_7nm->vco_current_rate = rate;
- pll_7nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;
-
- dsi_pll_setup_config(pll_7nm);
-
- dsi_pll_calc_dec_frac(pll_7nm);
-
- dsi_pll_calc_ssc(pll_7nm);
-
- dsi_pll_commit(pll_7nm);
-
- dsi_pll_config_hzindep_reg(pll_7nm);
-
- dsi_pll_ssc_commit(pll_7nm);
-
- /* flush, ensure all register writes are done*/
- wmb();
-
- return 0;
-}
-
-static int dsi_pll_7nm_lock_status(struct dsi_pll_7nm *pll)
-{
- int rc;
- u32 status = 0;
- u32 const delay_us = 100;
- u32 const timeout_us = 5000;
-
- rc = readl_poll_timeout_atomic(pll->mmio +
- REG_DSI_7nm_PHY_PLL_COMMON_STATUS_ONE,
- status,
- ((status & BIT(0)) > 0),
- delay_us,
- timeout_us);
- if (rc)
- pr_err("DSI PLL(%d) lock failed, status=0x%08x\n",
- pll->id, status);
-
- return rc;
-}
-
-static void dsi_pll_disable_pll_bias(struct dsi_pll_7nm *pll)
-{
- u32 data = pll_read(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CTRL_0);
-
- pll_write(pll->mmio + REG_DSI_7nm_PHY_PLL_SYSTEM_MUXES, 0);
- pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CTRL_0, data & ~BIT(5));
- ndelay(250);
-}
-
-static void dsi_pll_enable_pll_bias(struct dsi_pll_7nm *pll)
-{
- u32 data = pll_read(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CTRL_0);
-
- pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CTRL_0, data | BIT(5));
- pll_write(pll->mmio + REG_DSI_7nm_PHY_PLL_SYSTEM_MUXES, 0xc0);
- ndelay(250);
-}
-
-static void dsi_pll_disable_global_clk(struct dsi_pll_7nm *pll)
-{
- u32 data;
-
- data = pll_read(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
- pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CLK_CFG1, data & ~BIT(5));
-}
-
-static void dsi_pll_enable_global_clk(struct dsi_pll_7nm *pll)
-{
- u32 data;
-
- pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CTRL_3, 0x04);
-
- data = pll_read(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
- pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CLK_CFG1,
- data | BIT(5) | BIT(4));
-}
-
-static void dsi_pll_phy_dig_reset(struct dsi_pll_7nm *pll)
-{
- /*
- * Reset the PHY digital domain. This would be needed when
- * coming out of a CX or analog rail power collapse while
- * ensuring that the pads maintain LP00 or LP11 state
- */
- pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE4, BIT(0));
- wmb(); /* Ensure that the reset is deasserted */
- pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE4, 0x0);
- wmb(); /* Ensure that the reset is deasserted */
-}
-
-static int dsi_pll_7nm_vco_prepare(struct clk_hw *hw)
-{
- struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll);
- int rc;
-
- dsi_pll_enable_pll_bias(pll_7nm);
- if (pll_7nm->slave)
- dsi_pll_enable_pll_bias(pll_7nm->slave);
-
- /* Start PLL */
- pll_write(pll_7nm->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_PLL_CNTRL, 0x01);
-
- /*
- * ensure all PLL configurations are written prior to checking
- * for PLL lock.
- */
- wmb();
-
- /* Check for PLL lock */
- rc = dsi_pll_7nm_lock_status(pll_7nm);
- if (rc) {
- pr_err("PLL(%d) lock failed\n", pll_7nm->id);
- goto error;
- }
-
- pll->pll_on = true;
-
- /*
- * assert power on reset for PHY digital in case the PLL is
- * enabled after CX of analog domain power collapse. This needs
- * to be done before enabling the global clk.
- */
- dsi_pll_phy_dig_reset(pll_7nm);
- if (pll_7nm->slave)
- dsi_pll_phy_dig_reset(pll_7nm->slave);
-
- dsi_pll_enable_global_clk(pll_7nm);
- if (pll_7nm->slave)
- dsi_pll_enable_global_clk(pll_7nm->slave);
-
-error:
- return rc;
-}
-
-static void dsi_pll_disable_sub(struct dsi_pll_7nm *pll)
-{
- pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_RBUF_CTRL, 0);
- dsi_pll_disable_pll_bias(pll);
-}
-
-static void dsi_pll_7nm_vco_unprepare(struct clk_hw *hw)
-{
- struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll);
-
- /*
- * To avoid any stray glitches while abruptly powering down the PLL
- * make sure to gate the clock using the clock enable bit before
- * powering down the PLL
- */
- dsi_pll_disable_global_clk(pll_7nm);
- pll_write(pll_7nm->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_PLL_CNTRL, 0);
- dsi_pll_disable_sub(pll_7nm);
- if (pll_7nm->slave) {
- dsi_pll_disable_global_clk(pll_7nm->slave);
- dsi_pll_disable_sub(pll_7nm->slave);
- }
- /* flush, ensure all register writes are done */
- wmb();
- pll->pll_on = false;
-}
-
-static unsigned long dsi_pll_7nm_vco_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll);
- void __iomem *base = pll_7nm->mmio;
- u64 ref_clk = pll_7nm->vco_ref_clk_rate;
- u64 vco_rate = 0x0;
- u64 multiplier;
- u32 frac;
- u32 dec;
- u64 pll_freq, tmp64;
-
- dec = pll_read(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1);
- dec &= 0xff;
-
- frac = pll_read(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1);
- frac |= ((pll_read(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1) &
- 0xff) << 8);
- frac |= ((pll_read(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1) &
- 0x3) << 16);
-
- /*
- * TODO:
- * 1. Assumes prescaler is disabled
- * 2. Multiplier is 2^18. it should be 2^(num_of_frac_bits)
- */
- multiplier = 1 << 18;
- pll_freq = dec * (ref_clk * 2);
- tmp64 = (ref_clk * 2 * frac);
- pll_freq += div_u64(tmp64, multiplier);
-
- vco_rate = pll_freq;
-
- DBG("DSI PLL%d returning vco rate = %lu, dec = %x, frac = %x",
- pll_7nm->id, (unsigned long)vco_rate, dec, frac);
-
- return (unsigned long)vco_rate;
-}
-
-static const struct clk_ops clk_ops_dsi_pll_7nm_vco = {
- .round_rate = msm_dsi_pll_helper_clk_round_rate,
- .set_rate = dsi_pll_7nm_vco_set_rate,
- .recalc_rate = dsi_pll_7nm_vco_recalc_rate,
- .prepare = dsi_pll_7nm_vco_prepare,
- .unprepare = dsi_pll_7nm_vco_unprepare,
-};
-
-/*
- * PLL Callbacks
- */
-
-static void dsi_pll_7nm_save_state(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll);
- struct pll_7nm_cached_state *cached = &pll_7nm->cached_state;
- void __iomem *phy_base = pll_7nm->phy_cmn_mmio;
- u32 cmn_clk_cfg0, cmn_clk_cfg1;
-
- cached->pll_out_div = pll_read(pll_7nm->mmio +
- REG_DSI_7nm_PHY_PLL_PLL_OUTDIV_RATE);
- cached->pll_out_div &= 0x3;
-
- cmn_clk_cfg0 = pll_read(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG0);
- cached->bit_clk_div = cmn_clk_cfg0 & 0xf;
- cached->pix_clk_div = (cmn_clk_cfg0 & 0xf0) >> 4;
-
- cmn_clk_cfg1 = pll_read(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
- cached->pll_mux = cmn_clk_cfg1 & 0x3;
-
- DBG("DSI PLL%d outdiv %x bit_clk_div %x pix_clk_div %x pll_mux %x",
- pll_7nm->id, cached->pll_out_div, cached->bit_clk_div,
- cached->pix_clk_div, cached->pll_mux);
-}
-
-static int dsi_pll_7nm_restore_state(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll);
- struct pll_7nm_cached_state *cached = &pll_7nm->cached_state;
- void __iomem *phy_base = pll_7nm->phy_cmn_mmio;
- u32 val;
- int ret;
-
- val = pll_read(pll_7nm->mmio + REG_DSI_7nm_PHY_PLL_PLL_OUTDIV_RATE);
- val &= ~0x3;
- val |= cached->pll_out_div;
- pll_write(pll_7nm->mmio + REG_DSI_7nm_PHY_PLL_PLL_OUTDIV_RATE, val);
-
- pll_write(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG0,
- cached->bit_clk_div | (cached->pix_clk_div << 4));
-
- val = pll_read(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
- val &= ~0x3;
- val |= cached->pll_mux;
- pll_write(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1, val);
-
- ret = dsi_pll_7nm_vco_set_rate(&pll->clk_hw, pll_7nm->vco_current_rate, pll_7nm->vco_ref_clk_rate);
- if (ret) {
- DRM_DEV_ERROR(&pll_7nm->pdev->dev,
- "restore vco rate failed. ret=%d\n", ret);
- return ret;
- }
-
- DBG("DSI PLL%d", pll_7nm->id);
-
- return 0;
-}
-
-static int dsi_pll_7nm_set_usecase(struct msm_dsi_pll *pll,
- enum msm_dsi_phy_usecase uc)
-{
- struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll);
- void __iomem *base = pll_7nm->phy_cmn_mmio;
- u32 data = 0x0; /* internal PLL */
-
- DBG("DSI PLL%d", pll_7nm->id);
-
- switch (uc) {
- case MSM_DSI_PHY_STANDALONE:
- break;
- case MSM_DSI_PHY_MASTER:
- pll_7nm->slave = pll_7nm_list[(pll_7nm->id + 1) % DSI_MAX];
- break;
- case MSM_DSI_PHY_SLAVE:
- data = 0x1; /* external PLL */
- break;
- default:
- return -EINVAL;
- }
-
- /* set PLL src */
- pll_write(base + REG_DSI_7nm_PHY_CMN_CLK_CFG1, (data << 2));
-
- pll_7nm->uc = uc;
-
- return 0;
-}
-
-static int dsi_pll_7nm_get_provider(struct msm_dsi_pll *pll,
- struct clk **byte_clk_provider,
- struct clk **pixel_clk_provider)
-{
- struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll);
- struct clk_hw_onecell_data *hw_data = pll_7nm->hw_data;
-
- DBG("DSI PLL%d", pll_7nm->id);
-
- if (byte_clk_provider)
- *byte_clk_provider = hw_data->hws[DSI_BYTE_PLL_CLK]->clk;
- if (pixel_clk_provider)
- *pixel_clk_provider = hw_data->hws[DSI_PIXEL_PLL_CLK]->clk;
-
- return 0;
-}
-
-static void dsi_pll_7nm_destroy(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll);
- struct device *dev = &pll_7nm->pdev->dev;
-
- DBG("DSI PLL%d", pll_7nm->id);
- of_clk_del_provider(dev->of_node);
-
- clk_hw_unregister_divider(pll_7nm->out_dsiclk_hw);
- clk_hw_unregister_mux(pll_7nm->pclk_mux_hw);
- clk_hw_unregister_fixed_factor(pll_7nm->post_out_div_clk_hw);
- clk_hw_unregister_fixed_factor(pll_7nm->by_2_bit_clk_hw);
- clk_hw_unregister_fixed_factor(pll_7nm->byte_clk_hw);
- clk_hw_unregister_divider(pll_7nm->bit_clk_hw);
- clk_hw_unregister_divider(pll_7nm->out_div_clk_hw);
- clk_hw_unregister(&pll_7nm->base.clk_hw);
-}
-
-/*
- * The post dividers and mux clocks are created using the standard divider and
- * mux API. Unlike the 14nm PHY, the slave PLL doesn't need its dividers/mux
- * state to follow the master PLL's divider/mux state. Therefore, we don't
- * require special clock ops that also configure the slave PLL registers
- */
-static int pll_7nm_register(struct dsi_pll_7nm *pll_7nm)
-{
- char clk_name[32], parent[32], vco_name[32];
- char parent2[32], parent3[32], parent4[32];
- struct clk_init_data vco_init = {
- .parent_names = (const char *[]){ "bi_tcxo" },
- .num_parents = 1,
- .name = vco_name,
- .flags = CLK_IGNORE_UNUSED,
- .ops = &clk_ops_dsi_pll_7nm_vco,
- };
- struct device *dev = &pll_7nm->pdev->dev;
- struct clk_hw_onecell_data *hw_data;
- struct clk_hw *hw;
- int ret;
-
- DBG("DSI%d", pll_7nm->id);
-
- hw_data = devm_kzalloc(dev, sizeof(*hw_data) +
- NUM_PROVIDED_CLKS * sizeof(struct clk_hw *),
- GFP_KERNEL);
- if (!hw_data)
- return -ENOMEM;
-
- snprintf(vco_name, 32, "dsi%dvco_clk", pll_7nm->id);
- pll_7nm->base.clk_hw.init = &vco_init;
-
- ret = clk_hw_register(dev, &pll_7nm->base.clk_hw);
- if (ret)
- return ret;
-
- snprintf(clk_name, 32, "dsi%d_pll_out_div_clk", pll_7nm->id);
- snprintf(parent, 32, "dsi%dvco_clk", pll_7nm->id);
-
- hw = clk_hw_register_divider(dev, clk_name,
- parent, CLK_SET_RATE_PARENT,
- pll_7nm->mmio +
- REG_DSI_7nm_PHY_PLL_PLL_OUTDIV_RATE,
- 0, 2, CLK_DIVIDER_POWER_OF_TWO, NULL);
- if (IS_ERR(hw)) {
- ret = PTR_ERR(hw);
- goto err_base_clk_hw;
- }
-
- pll_7nm->out_div_clk_hw = hw;
-
- snprintf(clk_name, 32, "dsi%d_pll_bit_clk", pll_7nm->id);
- snprintf(parent, 32, "dsi%d_pll_out_div_clk", pll_7nm->id);
-
- /* BIT CLK: DIV_CTRL_3_0 */
- hw = clk_hw_register_divider(dev, clk_name, parent,
- CLK_SET_RATE_PARENT,
- pll_7nm->phy_cmn_mmio +
- REG_DSI_7nm_PHY_CMN_CLK_CFG0,
- 0, 4, CLK_DIVIDER_ONE_BASED,
- &pll_7nm->postdiv_lock);
- if (IS_ERR(hw)) {
- ret = PTR_ERR(hw);
- goto err_out_div_clk_hw;
- }
-
- pll_7nm->bit_clk_hw = hw;
-
- snprintf(clk_name, 32, "dsi%d_phy_pll_out_byteclk", pll_7nm->id);
- snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_7nm->id);
-
- /* DSI Byte clock = VCO_CLK / OUT_DIV / BIT_DIV / 8 */
- hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
- CLK_SET_RATE_PARENT, 1, 8);
- if (IS_ERR(hw)) {
- ret = PTR_ERR(hw);
- goto err_bit_clk_hw;
- }
-
- pll_7nm->byte_clk_hw = hw;
- hw_data->hws[DSI_BYTE_PLL_CLK] = hw;
-
- snprintf(clk_name, 32, "dsi%d_pll_by_2_bit_clk", pll_7nm->id);
- snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_7nm->id);
-
- hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
- 0, 1, 2);
- if (IS_ERR(hw)) {
- ret = PTR_ERR(hw);
- goto err_byte_clk_hw;
- }
-
- pll_7nm->by_2_bit_clk_hw = hw;
-
- snprintf(clk_name, 32, "dsi%d_pll_post_out_div_clk", pll_7nm->id);
- snprintf(parent, 32, "dsi%d_pll_out_div_clk", pll_7nm->id);
-
- hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
- 0, 1, 4);
- if (IS_ERR(hw)) {
- ret = PTR_ERR(hw);
- goto err_by_2_bit_clk_hw;
- }
-
- pll_7nm->post_out_div_clk_hw = hw;
-
- snprintf(clk_name, 32, "dsi%d_pclk_mux", pll_7nm->id);
- snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_7nm->id);
- snprintf(parent2, 32, "dsi%d_pll_by_2_bit_clk", pll_7nm->id);
- snprintf(parent3, 32, "dsi%d_pll_out_div_clk", pll_7nm->id);
- snprintf(parent4, 32, "dsi%d_pll_post_out_div_clk", pll_7nm->id);
-
- hw = clk_hw_register_mux(dev, clk_name,
- ((const char *[]){
- parent, parent2, parent3, parent4
- }), 4, 0, pll_7nm->phy_cmn_mmio +
- REG_DSI_7nm_PHY_CMN_CLK_CFG1,
- 0, 2, 0, NULL);
- if (IS_ERR(hw)) {
- ret = PTR_ERR(hw);
- goto err_post_out_div_clk_hw;
- }
-
- pll_7nm->pclk_mux_hw = hw;
-
- snprintf(clk_name, 32, "dsi%d_phy_pll_out_dsiclk", pll_7nm->id);
- snprintf(parent, 32, "dsi%d_pclk_mux", pll_7nm->id);
-
- /* PIX CLK DIV : DIV_CTRL_7_4*/
- hw = clk_hw_register_divider(dev, clk_name, parent,
- 0, pll_7nm->phy_cmn_mmio +
- REG_DSI_7nm_PHY_CMN_CLK_CFG0,
- 4, 4, CLK_DIVIDER_ONE_BASED,
- &pll_7nm->postdiv_lock);
- if (IS_ERR(hw)) {
- ret = PTR_ERR(hw);
- goto err_pclk_mux_hw;
- }
-
- pll_7nm->out_dsiclk_hw = hw;
- hw_data->hws[DSI_PIXEL_PLL_CLK] = hw;
-
- hw_data->num = NUM_PROVIDED_CLKS;
- pll_7nm->hw_data = hw_data;
-
- ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
- pll_7nm->hw_data);
- if (ret) {
- DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret);
- goto err_dsiclk_hw;
- }
-
- return 0;
-
-err_dsiclk_hw:
- clk_hw_unregister_divider(pll_7nm->out_dsiclk_hw);
-err_pclk_mux_hw:
- clk_hw_unregister_mux(pll_7nm->pclk_mux_hw);
-err_post_out_div_clk_hw:
- clk_hw_unregister_fixed_factor(pll_7nm->post_out_div_clk_hw);
-err_by_2_bit_clk_hw:
- clk_hw_unregister_fixed_factor(pll_7nm->by_2_bit_clk_hw);
-err_byte_clk_hw:
- clk_hw_unregister_fixed_factor(pll_7nm->byte_clk_hw);
-err_bit_clk_hw:
- clk_hw_unregister_divider(pll_7nm->bit_clk_hw);
-err_out_div_clk_hw:
- clk_hw_unregister_divider(pll_7nm->out_div_clk_hw);
-err_base_clk_hw:
- clk_hw_unregister(&pll_7nm->base.clk_hw);
-
- return ret;
-}
-
-struct msm_dsi_pll *msm_dsi_pll_7nm_init(struct platform_device *pdev, int id)
-{
- struct dsi_pll_7nm *pll_7nm;
- struct msm_dsi_pll *pll;
- int ret;
-
- pll_7nm = devm_kzalloc(&pdev->dev, sizeof(*pll_7nm), GFP_KERNEL);
- if (!pll_7nm)
- return ERR_PTR(-ENOMEM);
-
- DBG("DSI PLL%d", id);
-
- pll_7nm->pdev = pdev;
- pll_7nm->id = id;
- pll_7nm_list[id] = pll_7nm;
-
- pll_7nm->phy_cmn_mmio = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
- if (IS_ERR_OR_NULL(pll_7nm->phy_cmn_mmio)) {
- DRM_DEV_ERROR(&pdev->dev, "failed to map CMN PHY base\n");
- return ERR_PTR(-ENOMEM);
- }
-
- pll_7nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL");
- if (IS_ERR_OR_NULL(pll_7nm->mmio)) {
- DRM_DEV_ERROR(&pdev->dev, "failed to map PLL base\n");
- return ERR_PTR(-ENOMEM);
- }
-
- spin_lock_init(&pll_7nm->postdiv_lock);
-
- pll = &pll_7nm->base;
- pll->min_rate = 1000000000UL;
- pll->max_rate = 3500000000UL;
- if (pll->type == MSM_DSI_PHY_7NM_V4_1) {
- pll->min_rate = 600000000UL;
- pll->max_rate = (unsigned long)5000000000ULL;
- /* workaround for max rate overflowing on 32-bit builds: */
- pll->max_rate = max(pll->max_rate, 0xffffffffUL);
- }
- pll->get_provider = dsi_pll_7nm_get_provider;
- pll->destroy = dsi_pll_7nm_destroy;
- pll->save_state = dsi_pll_7nm_save_state;
- pll->restore_state = dsi_pll_7nm_restore_state;
- pll->set_usecase = dsi_pll_7nm_set_usecase;
-
- pll_7nm->vco_delay = 1;
-
- ret = pll_7nm_register(pll_7nm);
- if (ret) {
- DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
- return ERR_PTR(ret);
- }
-
- /* TODO: Remove this when we have proper display handover support */
- msm_dsi_pll_save_state(pll);
-
- return pll;
-}
--
2.30.2
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
